Contact

Dr. Gregory Lecrivain
Computational Fluid Dynamics
g.lecrivainAthzdr.de
Phone: +49 351 260 - 3768
Fax: +49 351 260 - 13768

Numerical investigation of transport, deposition and re-entrainment of aerosol particles

In a high temperature pebble-bed reactor core, the friction between graphite elements triggers the formation of carbonaceous dust. During reactor operation fission products diffuse into the graphite material and the carbonaceous dust subsequently becomes carrier of fission products. The dust is eventually conveyed by the cooling carrier phase and deposits in the primary circuit of the high temperature reactor. In hypothetical severe accident, a dose of radioactive material dust may escape the system boundaries. The turbulent flow structures of the coolant contribute significantly to deposition and re-entrainment of nuclear aerosol particles. Numerical modeling of these complex transport mechanisms are therefore of key importance to nuclear safety.

Numerical methods based on the Euler-Lagrange approach are currently being developed to accurately predict transport, deposition and re-entrainement of aerosol particles. Particle transport in a turbulent obstructed channel flow can be seen in Figure 1. Various experiments are being performed to validate the simulation results. Am early study already shows good agreements between numerical and experimental data (Figure 2).



Fig. 1: Particle transport in an obstructed channel flow.
Click on the picture for full view.
Fig. 2: Multilayer deposition build-up between two successive obstacles.
Click on the picture for full view.

Acknowledgement

This work is supported by the European Commission under Grant 249337 of the “Thermal-Hydraulics of Innovative Nuclear Systems” project.


References

  • Lecrivain, G., Drapeau-Martin, S., Barth, T. and Hampel, U. (2013).
    Numerical simulation of multilayer deposition in an obstructed channel flow.
    Advanced Powder Technology, In Press, Corrected Proof.

  • T. Barth, G Lecrivain, U. Hampel (2013).
    Particle deposition study in a horizontal turbulent duct flow using optical microscopy and particle size spectrometry.
    Journal of Aerosol Science, Vol. 60, p. 47-54.

  • G. Lecrivain and U. Hampel (2012).
    Influence of the Lagrangian integral time scale estimation in the near wall region on particle deposition.
    ASME Journal of Fluids Engineering, Vol. 134, p. 1-6.



Contact

Dr. Gregory Lecrivain
Computational Fluid Dynamics
g.lecrivainAthzdr.de
Phone: +49 351 260 - 3768
Fax: +49 351 260 - 13768