Contact

Dr. Roland Beyer
PostDoc / Beamline scientist
Nuclear Physics
roland.beyerAthzdr.de
Phone: +49 351 260 - 3281

The neutron beam shutters/absorber - up to July 2013

(latest version)

Two different shutters/absorbers are installed in the nELBE setup, one at each end of the neutron collimator, i.e. one in room 123, where the liquid Pb loop is placed, and one in the experimental cave room 111c.

The shutter in room 111c consists of a tungsten cylinder (length = 26 cm, diameter = 18 cm) and is used to close the collimator.

The shutter/absorber in room 123 is used for two purposes: At first it can debar all neutrons and gammas from entering the collimator, and second it gives the possibility to mount different absorbers to manipulate the neutron and gamma spectrum or to perform transmission experiments.

The layout of the neutron beam shutter/absorber is shown in the drawing below. A tungsten cylinder is used as beam shutter. 4 holders can be used for mounting several absorbers. The whole apparatus can be moved by remote control using the ELBE WinCC to position the absorber of choice in front of the collimator.

At the moment the configuration is as follows:

position material length diameter
1 W 150 mm 140 mm
2 Pb (#4) 30 mm 25 mm
3 Pb (#5) + Fe 30 + 20 mm 25 / 25 mm
4 Pb (#6) + Au 30 + 16 mm 25 / 26 mm
5 PE 300 mm 60 mm

The following absorbers are available:

material length diameter mass
Al 40.0 mm 60.0 mm  
Au 16.0 mm 26.0 mm 163.76 g
C 30.0 mm 25.0 mm 24.6746 g
Fe 20.0 mm 25.0 mm 77.2740
Pb 30.0 mm 25.1 mm  
Pb (#4) 30.0 mm 25.0 mm 161.71 g
Pb (#5) 30.0 mm 25.0 mm 161.74 g
Pb (#6) 30.0 mm 25.0 mm 161.71 g
Pb 59.0 mm 25.0 mm 318.3 g
Pb 98.0 mm 25.0 mm 529.2 g
PE 10.0 mm 60.0 mm 26.7615 g
PE 50.0 mm 60.0 mm 134.6058 g
PE 300.0 mm 60.0 mm  
Ta 15.0 mm 25.1 mm 124.0 g
Ta 25.5 mm 25.1 mm 210.0 g
Ta 35.2 mm 25.1 mm 290.1 g

Contact

Dr. Roland Beyer
PostDoc / Beamline scientist
Nuclear Physics
roland.beyerAthzdr.de
Phone: +49 351 260 - 3281