Baseline-Modell für polydisperse Blasenströmungen – iMUSIG
Die Schließung des Zwei-Fluid-Modells für die Blasenströmung ist ein sehr anspruchsvolles Problem aufgrund komplexer Beziehungen zwischen Impulsaustausch, Turbulenz und Blasengröße. Ein wichtiges Forschungsthema ist die Validierung und Weiterentwicklung des Baseline-Modells für polydisperse Blasenströmungen.
HZDR baseline model strategy
To consolidate multiphase CFD in frame of the Euler-Euler approach well defined baseline models are established and improved step by step. The same model can be used for different applications.
HZDR baseline model for poly-disperse bubbly flows
Information on how to setup a simulation of bubbly flows and the exact definition of the closure models in the present version of the baseline model for poly-dispersing bubbly flows.
Inhomogeneous MUSIG (iMUSIG) approach
The closure models may depend sensitively on bubble, drop or particle size. This may lead e.g. to a separation of small and large bubbles. The iMUSIG approach allows the sub-division of the disperse phase in sub-phases and the combination with a population balance.
Bubble-induced turbulence (BIT)
A new model to consider the bubble induced turbulence (BIT) was recently derived basing on data from direct numerical simulations (DNS). Basing on the shear stress turbulence (SST) model additional source terms are proposed for BIT.
Bubble coalescence and breakup
The models for bubble coalescence and breakup consider the different mechanisms which may lead to a merging of bubbles or their fragmentation.
Euler-Euler-modeling of reactive flow in bubble columns
In the frame of a project within the DFG priority program 1740 “Influence of Local Transport Processes on Chemical Reactions in Bubble Flows” closure models for chemical reaction as well as the associated mass transport are included in the Euler-Euler description of bubbly flows.
Evaporating and condensing flows
For many applications evaporation and condensation processes are important. Models are developed for wall boiling including the consideration of critical heat flux (CHF), for boiling flows caused by pressure decrease and for condensing flows.
Dedicated experiments for the development and validation of closure models
Experiments are done which specifically aim on the development and validation of closure models for poly-disperse bubbly flows. To extract the required data extensive code libraries for the data evaluation were established.