Contact

Dr. Sven Eckert

Head Magneto­hydro­dynamics
s.eckertAthzdr.de
Phone: +49 351 260 2132

Dr. Thomas Wondrak

Head Inductive measurement techniques
t.wondrakAthzdr.de
Phone: +49 351 260 2489

Measurement techniques for liquid metals

In metallic melts mainly the flow structure and, in the case of gas injection, the localization of gas bubbles are the features of interest. While in the laboratory often low-melting alloys like gallium- indium-tin are employed, in the industry metallic melts with temperatures of 1600°C can be encountered, that additionally can be chemically aggressive. Depending on the scenario, invasive, non-invasive or contactless measurement techniques are applied.

Applying well-suited measurement techniques enables

  • a better understanding of generic and industrial flow problems,
  • realtime monitoring of flow coditions in industrial plants, making exact process control possible and thereby
  • increases process efficiency in terms of energy input and process throughput as well as decreasing rejects.


Foto: Magneto-hydrodynamics: Steel Casting Using Magnetic Fields (Picture: AIFilm) ©Copyright: AI Films

Contactless Inductive Flow Tomography (CIFT)

This measuring method was developed in 2004 at the Helmholtz-Zentrum Dresden-Rossendorf and enables the reconstruction of global melt flows in containers. It can, for example, be used in continuous steel casting or crystal growth.
More
Foto: UDV ec ©Copyright: Sven Franke

Ultrasound Doppler Velocimetry

The ultrasound Doppler velocimetry is a method for the non-invasive measurement of local flow velocities and well suited for the application at metal melts. It is one of the essential flow measurement techniques of magnetohydrodynamics and as such it is continuously enhanced from HZDR for the application at liquid metals, especially for multi-dimensional field measurements and measurements at hot metal melts.
More
Foto: ECFM small ©Copyright: Dr. Nico Krauter

Eddy Current Flow Meter

The Eddy Current Flow Meter is a robust and reliable sensor for inductive flow rate measurements in liquid metals for ambient temperatures up to 700 °C. It is an invasive Sensor which is immersed into the liquid metal in order to perform local flow rate measurements in the vicinity of the sensor. It is therefore especially suited to measure the flow rate in large liquid metal pools or pipes with high dia­meters. At HZDR, se­veral miniaturized ­versions of this sensor have been developed and tested.
More
Foto: TECFM small ©Copyright: Dr. Nico Krauter

Transient Eddy Current Flow Meter (TEC-FM)

Transient Eddy Current Flow Metering is a new inductive measurement technique for the calibration free velocity measurement of liquid metal flows or metallic solids. Two different sensors have been developed at HZDR: The external sensor can be used for contactless velocity measurements and the immersed sensor can be placed directly into the liquid metal do perform local velocity measurements in the vicinity of the sensor.
More
Foto: RM Title ©Copyright: Dr. Natalia Shevchenko

Radioscopic method

X-ray radioscopy is an important diagnostic tool for the in-situ studies of solidification processes and liquid metal two-phase flows. Based on the local density differences this technique deli­vers at least qualitative pictures of the flow pattern.
More
Foto: Scheme Level Sensor ©Copyright: Dr. Till Zürner

Inductive level measurement

The high electrical conductivity of liquid metals permits the measurement of the surface position and shape of a melt in a container using the induction of eddy currents. An alternating magnetic field is applied and the resulting secondary magnetic field is measured using gradiometric induction coils.
More
Foto: Bubble detection in liquid metal ©Copyright: Thomas Gundrum

Bubble detection in liquid metals

The high electrical conductivity of liquid metal can be exploited for a inductive contactless method for bubble detection.
More