Development of an Integral Finite Element Model for the Simulation of Scaled Core-Meltdown-Experiments


Development of an Integral Finite Element Model for the Simulation of Scaled Core-Meltdown-Experiments

Altstadt, E.; Willschütz, H.-G.

To get an improved understanding and knowledge of the processes and phenomena during the late phase of a core melt down accident the FOREVER-experiments (Failure of Reactor Vessel Retention) are currently underway. These experiments are simulating the lower head of a reactor pressure vessel under the load of a melt pool with internal heat sources. The geometrical scale of the experiments is 1:10 compared to a common Light Water Reactor. During the first series of experiments the Creep behaviour of the vessel is investigated.
Due to the multi-axial creep deformation of the three-dimensional vessel with a non-uniform temperature field these experiments are on the one hand an excellent possibility to validate numerical creep models which are developed on the basis of uniaxial creep tests. On the other hand the results of pre-test calculations can be used for an optimized experimental procedure.
Therefore a Finite Element model is developed on the basis of the multi-purpose commercial code ANSYS/Multiphysics®. Using the Computational Fluid Dynamic module the temperature field within the vessel wall is evaluated. The transient structural mechanical calculations are performed applying a creep model which is able to take into account great temperature, stress and strain variations within the model domain. The new numerical approach avoids the use of a single creep law with constants evaluated for a limited stress and temperature range. Instead of this a three-dimensional array is developed where the creep strain rate is evaluated according to the actual total strain, temperature and equivalent stress for each element.
Performing post-test calculations for the FOREVER-C2 experiment it was found that the assessment of the experimental data and of the numerical results has to be done very carefully. A slight temperature increase during the creep deformation stage of the experiment for example could explain the creep behaviour which appears to be tertiary because of the accelerating creep strain rate. Taking into account both - experimental and numerical results - gives a good opportunity to improve the simulation and understanding of real accident scenarios.

Keywords: Finite Element Calculations; FOREVER-Experiment; Coupling of Thermo-Fluid dynamic and Structural Mechanical Model; Advanced Creep Modelling

  • Open Access Logo Wissenschaftlich-Technische Berichte / Forschungszentrum Rossendorf; FZR-292 April 2000
    ISSN: 1437-322X

Downloads

Permalink: https://www.hzdr.de/publications/Publ-3276
Publ.-Id: 3276