Status of the Superconducting RF Photo-Injector Development

A status report of the superconducting RF photo electron injector development at Forschungszentrum Dresden-Rossendorf (FZD) will be given. The SRF gun project is a collaboration of BESSY, DESY, MBI and FZD and aims at the installation of a high average current CW photo injector at the ELBE superconducting electron linac. Main design parameters of the SRF gun are an electron energy of 9.5 MeV, a maximum average current of 1 mA, transverse normalized emittances (rms) of 1 mm mrad at 77 pC and 2.5 mm mrad at 1 nC bunch charge. The 1.3 GHz niobium cavity consists of three full cells with TESLA geometry, a specially designed half-cell in which the photo cathode is placed, and a choke filter in order to prevent rf losses at the cathode side of the cavity. Presently, the helium tank welding and cavity treatment have been finished. The cavity is now in the FZD and the cryomodule assembly has been started. Various subsystems like cathode cooler, cavity tuners, cryostat components, and the niobium cavity are still being tested and measured. A photo cathode preparation system was developed and installed. The equipment is now in operation and the first series of Cs2Te photo cathodes have been produced. The development of the 262 nm driver laser system for the high charge mode (500 kHz, 1 nC) is finished. A diagnostic beamline, which is especially designed for the SRF gun parameter measurement, is being build up.