Publications Repository - Helmholtz-Zentrum Dresden-Rossendorf

"Online First" included
Approved and published publications
Only approved publications

41397 Publications

Selektive Trennung von Rhenium und Molybdän mittels Solventextraktion – Untersuchung von supramolekularen Wechselwirkungen und Komplexbildung

Nestel, J.; Helbig, T.; Kelly, N.

Rhenium ist ein sehr seltenes Element. Die Häufigkeit in der Lithosphäre liegt in der Größenordnung von Gold. Als Hochtechnologiemetall erfährt Rhenium insbesondere zur Fertigung hochwarmfester Superlegierungen steigende Nachfrage. Sowohl in den natürlichen Lagerstätten, als auch in Sekundärrohstoffen, liegt Rhenium häufig gemeinsam mit Molybdän vor.
Im Rahmen der Solventextraktion von Re(VII) und Mo(VI) aus saurer Lösung mittels aliphatischer Amine wurde bereits in den 1980er Jahren ein Effekt beschrieben, der bei Zusatz von Organophosphorderivaten eine selektive Trennung von Re(VII) und Mo(VI) bei der Reextraktion ermöglicht. Die vorliegende Arbeit nutzt FTIR-Spektroskopie und mehrdimensionale NMR-Experimente, um die Ursachen für die selektive Trennung der beiden Elemente zu belegen und Wege zu ihrer Optimierung aufzuzeigen.
Die Ergebnisse der selektiven Reextraktion (Stripping) werden in Übereinstimmung mit den spektroskopischen Befunden vor dem Hintergrund ihrer supramolekularen Ursachen präsentiert.

  • Lecture (Conference)
    DECHEMA Jahrestagung der Fachgruppen Extraktion und Phytoextraktion, 07.-08.02.2019, Muttenz, Schweiz

Permalink: https://www.hzdr.de/publications/Publ-30226
Publ.-Id: 30226


Probing the role of bound excitons in optical properties of titanium dioxide anatase from first principles

Sruthil, L. S. B.; Devaraj, M.; Posselt, M.; Alok, S.

The electronic structure and optical spectra of anatase titanium dioxide is computed by combining state-of-the-art density functional theory (DFT) and many-body perturbation theory (MBPT). Excitonic optical spectra is computed by solving Bethe-SalpeterEquation (BSE). From the solution of BSE and also from the analysis of charge distribution the photo-generated excitons in anatase is shown to be strongly bound and localized. Such typical behavior of intrinsic excitons in bulk anatase makes it a material which shows superior performance in photo catalysis, photovoltaics, optoelectronics and in nonlinear optical regime.

Keywords: Excitons; optical properties; titanium dioxide; first-principle calculations

  • Poster
    64th DAE Solid State Physics Symposium, 18.-22.12.2019, Jodhpur, Rajasthan, India

Permalink: https://www.hzdr.de/publications/Publ-30225
Publ.-Id: 30225


Correlative microscopy of relevant ex-vivo and in-vitro biological systems by multimodal optical and high resolution ion/electron based techniques

Podlipec, R.; Klingner, N.; Heller, R.; Kriselj, A.; Pelicon, P.; Strancar, J.; von Borany, J.

Correlative microscopy combining light and electron microscopy (CLEM) has become one of the important and unmissable tools in various investigations of complex biological systems revealing high-resolution structural and highly-specific functional information [1]. In the last years more combinations of other advanced techniques have been developed, such as combining optical microscopy with atomic force spectroscopy/microscopy (AFM) or with magnetic resonance imaging, etc [2] whereas in our study multimodal optical microscopy has been correlated with ion and electron based techniques such as is helium ion microscopy (HIM) [3]. The purpose for using combination of the complementary techniques was to elucidate or better interpret specific biological problems which could not be explained just by one technique lacking of whether resolution, sensitivity of specificity. We focused on toxicology related scientific questions of how inhaled nanoparticles interact with lung epithelial cells/tissue once get into direct contact and why interactions can eventually lead to diseases and potentially persistent inflammation [4,5]. In order to better understand the interaction on nanometer scales we first developed proper lung in-vitro model which was followed by proper sample preparation for efficient correlative microscopy using multimodal optical microscopy and high resolution HIM microscopy. By latter we managed to image single metal oxide nanoparticles on cell surfaces interacting with cell membranes, while functional information of the same events was prior measured with confocal and super-resolution optical microscopy. Besides, we implemented described correlative microscopies also for scientific problem related to rejection of hip implants where material debris is found everywhere in the surrounding periprosthetic tissue with lack of knowledge what happens on a molecular scale. The latest findings of both ongoing studies will be presented.

References:

1. P. de Boer, JP Hoogenboom, BNG Giepmans, Nature Methods 12, 503-513 (2015).
2. T Ando, et. Al, Journal of Physics D: Applied physics 44, (2018)
3. G Hlawacek. et Al. Helium Ion Microscopy. J. Vac. Sci. Technol. 32, (2014)
4. Li, X., Jin, L. & Kan, H. Air pollution: a global problem needs local fixes. Nature 570, 437–439 (2019).
5. E Underwood. The polluted brain. Science 355, 342–345 (2017).

Keywords: CLEM; Helium Ion Microscopy; FLIM microscopy; lung epithelium; TiO2 nanotubes; hip implants; periprosthetic tissue; metal debris

Related publications

  • Invited lecture (Conferences)
    Seminar of Croatian Biophysical Society, 16.12.2019, Zagreb, Croatia

Permalink: https://www.hzdr.de/publications/Publ-30224
Publ.-Id: 30224


Upscaling High-Resolution Mineralogical Analyses to Estimate Mineral Abundances in Drill Core Hyperspectral Data

Khodadadzadeh, M.; Gloaguen, R.

In this paper, we propose a supervised learning method for estimating mineral quantities in drill core hyperspectral data. Our proposed method links the high-resolution mineralogical analyses and hyperspectral data to learn a dictionary. The learned dictionary is then used for linear unmixing and estimating mineral abundances of the entire drill core sample. To evaluate the performance of the proposed method, we use a drill core data set, which is composed of the VNIR-SWIR hyperspectral data and high-resolution mineralogical analyses performed by a Scanning Electron Microscopy (SEM) instrument equipped with the Mineral Liberation Analysis (MLA) software. The quantitative and qualitative analysis of the experimental results shows that the proposed method provides reliable mineral quantity estimates.

Keywords: Hyperspectral drill core data; highresolution mineralogical analysis; upscaling; dictionary learning

  • Contribution to proceedings
    IGARSS 2019-2019 IEEE International Geoscience and Remote Sensing Symposium, 28.07.-02.08.2019, Yokohama, Japan

Permalink: https://www.hzdr.de/publications/Publ-30223
Publ.-Id: 30223


Zustandsüberwachung von Transport- und Lagerbehältern für abgebrannte Brennelemente und wärmeentwickelnde HAW bei verlängerter Zwischenlagerung – strahlungsbasierte, thermographische und akustische Messverfahren

Wagner, M.; Fiß, D.; Schmidt, S.; Reinicke, S.; Kratzsch, A.; Hampel, U.

Bis ein Endlager in tiefen geologischen Formationen zur Verfügung steht, besteht in Deutschland Bedarf für die sichere Zwischenlagerung abgebrannter Brennelemente an den Kraftwerksstandorten. Es wird davon ausgegangen, dass erhebliche Zeiträume von mehr als 50 Jahren zu berücksichtigen sind. Dadurch ergeben sich verschiedene regulatorische und sicherheitstechnische Fragestellungen. Eine davon ist die nach der Langzeitintegrität der Brennelemente in den Behältern. Ihre Beantwortung hat direkte Relevanz für den späteren Transport zum Endlager und die Umladung des abgebrannten Kernbrennstoffs in andere Behälter. Im Rahmen des vom BMWi geförderten Vorhabens DCS-MONITOR untersuchen wir Potenziale und Grenzen von nichtinvasiven Verfahren zur Überwachung des Zustands des radioaktiven Inventars von Trockenlagerbehältern. Als solche betrachten wir die Thermographie, strahlungsbasierte Messverfahren sowie akustische Messverfahren.

  • Invited lecture (Conferences)
    Fachworkshop Zwischenlagerung, 22.-23.10.2019, Berlin, Deutschland

Permalink: https://www.hzdr.de/publications/Publ-30222
Publ.-Id: 30222


An analysis for detecting potential relocation of the inventory of dry storage containers during prolonged interim storage via changes in the wall temperature fields

Wagner, M.; Reinicke, S.; Kratzsch, A.; Hampel, U.

We investigated the suitability of thermography for detecting a potential relocation of the inventory of dry storage containers of type CASTOR V/19. We used numerical simulations of the heat transfer in the container to determine the sensitivity of the wall temperature distribution to such changes. We conducted an analysis for three different hypothetical damage cases: a 9 cm compaction of the fuel in all fuel rods of a single fuel assembly, the same compaction in all fuel assemblies and a compaction of all fuel assemblies by 50 %. The analysis shows that the temperature difference between intact case and all three damage cases after 40 years is too low for an accurate detection becoming even lower for longer storage periods. Temporal thermal insulation of the containers may increase the temperature gradients but reducing the spatial resolution.

Keywords: interim storage; heat transfer

Related publications

Permalink: https://www.hzdr.de/publications/Publ-30221
Publ.-Id: 30221


Ternary MIn2S4 (M = Mn, Fe, Co, Ni) thiospinels - crystal structure and thermoelectric properties

Wyżga, P.; Veremchuk, I.; Bobnar, M.; Hennig, C.; Leithe-Jasper, A.; Gumeniuk, R.

The combined structural, magnetic and thermoelectric study of polycrystalline ternary MIn2S4 (M = Mn, Fe, Co, Ni) thiospinels is presented. All compounds crystallize with MgAl2O4-type structure. Rietveld refinement analysis confirmed that the preferred crystallographic position of transition metal element changes from mainly tetrahedral 8a for Mn to exclusively octahedral 16d for Ni (i.e. increase of the inversion parameter). The magnetic susceptibility measurements revealed M-elements to possess 2+ oxidation state in MIn2S4. All these compounds order antiferromagnetic with Néel temperature TN ranging from 5–13 K. Studied thiospinels are n-type semiconductors with large values of electrical resistivity ρ > 0.6 Ω∙m at RT. An increase of inversion parameter leads to reduction of determined activation energies, as well as to the more disorder-like behavior of thermal conductivity. The highest thermoelectric figure of merit ZT was observed for MIn2S4 with M = Fe, Ni, which adopt inverse spinel structure.

Keywords: thiospinel; powder diffraction; magnetic susceptibility; thermoelectric properties

Related publications

Permalink: https://www.hzdr.de/publications/Publ-30220
Publ.-Id: 30220


Ultra-trace Detection of 99Tc in Environmental Samples by Accelerator Mass Spectrometry

Pitters, J.; Faestermann, T.; Gülce, F.; Hain, K.; Koll, D.; Korschinek, G.; Martschini, M.; Quinto, F.; Rugel, G.; Golser, R.

In our project we are developing methods for the detection of the anthropogenic radionuclide 99-Technetium by Accelerator Mass Spectrometry (AMS). For environmental samples, a highly effective chemical sample preparation method was developed, that removes a large fraction of the interfering elements Ruthenium and Molybdenum and embeds the Tc in a Niobium matrix. The samples were measured at the AMS setup of the Maier-Leibnitz-Laboratory in Munich by extraction of 99TcO− from the ion source, stripping to 99Tc12+ and normalizing to the 93Nb11+ current. A particle energy of 150 MeV in combination with the detection via a Time-of-Flight path and the Gas-filled Analyzing Magnet System (GAMS) allows for a sensitivity of 5·1E6 atoms per sample. The method is discussed together with results from environmental samples. In particular, 99Tc concentrations along a water column from the Pacific Ocean, as well as in porewater from an Austrian peat-bog are presented.

Keywords: AMS 99Tc

Permalink: https://www.hzdr.de/publications/Publ-30219
Publ.-Id: 30219


AMS of 90Sr at the sub-fg-level using laser photodetachment at VERA

Marchhart, O.; Martschini, M.; Honda, M.; Hanstorp, D.; Lachner, J.; Liang, H.; Priller, A.; Steier, P.; Wieser, A.; Golser, R.

The fission product 90Sr (T1/2 = 28.9 a) is of interest in environmental sciences for its radiotoxicity as well as a potential tracer. Limits of detection (LoD) of mass spectrometric methods such as ICP-MS, RIMS or conventional AMS are close to the radiometric limit of 3 mBq.
The main problem in AMS of 90Sr is the strong interference of the stable isobar 90Zr. This problem can be overcome with the new Ion Laser InterAction Mass Spectrometry (ILIAMS) setup at the Vienna Environmental Research Accelerator (VERA). It provides near complete suppression of elemental or molecular isobars via selective laser photodetachment inside a gas-filled radiofrequency quadrupole (RFQ). With 10W of laser power from a 532nm cw-laser and a He+O2 mixture as buffer gas, ILIAMS achieves a suppression factor for 90Zr of 10⁷. Extracting SrF₃^− out of the ion source and elemental separation inside an ionization chamber gives an additional Zr suppression of 10⁵.
Measurements with dilution series of reference materials were successfully conducted. The overall Sr detection efficiency is 0.4 %₀ and the
blank level 90Sr/Sr=(4.5 ± 3.2)×10^−15. This corresponds to a more than tenfold improved LoD of 0.1 mBq.

Permalink: https://www.hzdr.de/publications/Publ-30218
Publ.-Id: 30218


Application of AMS to the research on nuclear waste disposal safety

Quinto, F.; Blechschmidt, I.; Faestermann, T.; Hain, K.; Koll, D.; Korschinek, G.; Kraft, S.; Pitters, J.; Plaschke, M.; Rugel, G.; Schäfer, T.; Steier, P.; Geckeis, H.

At the Grimsel Test Site (Switzerland), several in situ tracer tests aim at studying the possible radionuclide release from the bentonite engineered barrier system and the processes which may lead to their subsequent migration though the granodiorite host rock. We investigate the diffusion of Tc-99 and actinides (AN) through bentonite and the remobilization over a time period of several years of the AN tracers employed in previous in situ tests. AMS is the ultra-trace analysis method of choice for studying the behaviour of Tc-99 and AN with concentration at and below fg/g levels in such dedicated long-term in situ tests, providing results that contribute to the safety evaluation of future nuclear waste repositories.

Keywords: AMS Tc-99

Permalink: https://www.hzdr.de/publications/Publ-30217
Publ.-Id: 30217


Modeling of the free-surface vortex driven bubble entrainment into water

Putra, R. A.; Lucas, D.

The recently developed GENTOP (Generalized Two Phase Flow) concept which bases on the multi-field Euler-Euler approach was applied to model a free-surface vortex - a flow situation which is relevant for hydraulic intake. A new bubble entrainment model has been developed and implemented in the concept. In general a satisfying agreement with the experimental data can be achieved. However, the gas entrainment can be largely affected by several parameters or models used in the CFD (Computational Fluid Dynamics) simulation. The scale of curvature correction C_scale in the turbulence model, the coefficient in the entrainment model C_ent and the assigned bubble size to be entrained has significant influence on the gas entrainment rate. The gas entrainment increases with higher C_scale which can be attributed to the stronger rotation captured by the simulation. A smaller bubble size gives higher gas entrainment while a larger bubble size leads to a smaller entrainment with a periodical peak of entrainment in its transient profile. The results also show that the gas entrainment can be controlled by adjusting the entrainment coefficient C_ent. Basing on the modeling framework presented in this paper further improvement on the physical modeling of the entrainment process should be done.

Keywords: Multiphase flow; Bubble entrainment; Free-surface vortex; Rotating flow; GENTOP

Permalink: https://www.hzdr.de/publications/Publ-30216
Publ.-Id: 30216


Ion Laser Interaction Mass Spectrometry - status and prospects

Martschini, M.; Lachner, J.; Hain, K.; Marchhart, O.; Pitters, J.; Priller, A.; Steier, P.; Wieser, A.; Golser, R.

The Ion Laser InterAction Mass Spectrometry (ILIAMS) technique at the Vienna Environmental Research Accelerator (VERA) tackles the problem of elemental selectivity in AMS. It achieves near-complete suppression of isobar contaminants via selective laser photodetachment of decelerated anion beams in a gas-filled radio frequency quadrupole cooler. The technique exploits differences in electron affinities (EA) within elemental or molecular isobaric systems neutralizing anions with EAs smaller than the photon energy. Collisional detachment or chemical reactions with the buffer gas can further enhance anion separation.
In AMS of 36Cl and 26Al, ILIAMS reliably provides isobar suppression of more than 10 orders of magnitude. Furthermore it already enables measurements of 90Sr, 135,137Cs and 182Hf with unprecedented sensitivity at VERA and allows to study anion chemistry at eV energies.
Current research focusses on extending this technique to 41Ca, 53Mn, 59Ni, 99Tc and 107Pd. Exotic species such as double-negatively charged carbon clusters complete the cooler ’guestbook’. This contribution will give an overview over these achievements and prospects of the ILIAMS-technique for the near future.

Permalink: https://www.hzdr.de/publications/Publ-30215
Publ.-Id: 30215


Supernova-produced 53Mn on Earth

Korschinek, G.; Faestermann, T.; Poutivtsev, M.; Arazi, A.; Knie, K.; Rugel, G.; Wallner, A.

For the age range from 1.5 to 4 Myr ago we found in deep ocean ferromanganese crusts an excess concentration in terms of 53Mn/Mn of about 4 · 10−14 over that expected for cosmogenic production. We conclude that this 53Mn is of supernova origin because it is detected in the same time window, about 2.5 Myr ago, where 60Fe has been found earlier. This overabundance confirms unambiguously the supernova (SN) origin of that 60Fe. For the first time supernova-formed 53Mn has been detected and it is the second positively verified radioisotope from the same supernovae. The ratio 53Mn/60Fe of about 12 is consistent with that expected for a SN with a 11 - 25 M⊙ progenitor mass and
solar metallicity. A fit over the whole range until 10 Myr shows also a second increase of 53Mn/Mn in the range around 6 Myr matching
recent 60Fe detection in sediments at ANU.

Keywords: AMS; 53Mn; Supernova

Permalink: https://www.hzdr.de/publications/Publ-30214
Publ.-Id: 30214


Development of novel α-CEA target modules (RevTMs) for the switchable RevCAR system

González Soto, K. E.

Cancer is one of the main causes of death and represents a worldwide health problem. Most of the cancer-related deaths are associated with the appearance and progression of a solid tumor. Even though effective conventional treatments exist, they share a common drawback, which is their incapacity to strictly distinguish between malignant and healthy cells. Since it was observed that immune cells are capable to eliminate cancer cells, extensive research has been made to retarget immune cells towards malignant cells without damaging healthy tissue. This type of approach is termed as immunotherapy and involves diverse strategies ranging from the use of Abs to engineered immune cells. One of the most attractive immunotherapeutic strategies is based on the engineering of T cells to express chimeric antigen receptors (CARs), which can recognize specific antigens localized on the surface of cancer cells, leading to an activation of the CAR T cells and a subsequently killing of the malignant cells. Even though CAR technology has shown a strong potential in targeting cancer cells during pre-clinical and clinical studies, numerous clinical trials have also revealed that once they are infused into the patient, the activity of the modified T cells becomes uncontrollable, which represents the main safety problem from the system. For this reason, a novel modular and switchable CAR platform, termed as RevCAR system, was developed in the group of Prof. Bachmann. A crucial element of mentioned system is the design of the RevCAR. In contrast to conventional CARs, RevCARs lack an extracellular binding moiety and comprise only a short peptide epitope instead. Thus, RevCAR T cells are per se inert because they cannot bind to any antigen. Only in the presence of target modules (RevTMs), which bind on the one hand to the peptide epitope of RevCARs and on the other hand simultaneously to tumor targets, RevCAR T cells can be redirected and consequently activated against tumor cells. An attractive tumor-associated antigen (TAA) for the development of immunotherapies is the carcinoembryonic antigen (CEA), because it is highly overexpressed on certain cancer types associated with solid tumor formation, such as breast and lung cancer. In order to show the proof of concept that CEA is an optimal TAA to redirect the RevCAR system, two different formats of RevTMs (scFv- or IgG-based) were produced and tested for their functionality. Here we have shown, that both RevTMs were able to efficiently redirect RevCAR T cells to eliminate CEA-expressing tumor cells in an antigenand epitope-specific as well as TM-dependent manner. Moreover, here, the IgG4-based RevTM worked more efficient than the scFv-based RevTM.

  • Master thesis
    HZDR, 2019

Permalink: https://www.hzdr.de/publications/Publ-30213
Publ.-Id: 30213


Off-harmonic optical probing of high intensity laser interaction with cryogenic hydrogen jet target

Bernert, C.; Kraft, S.; Löser, M.; Metzkes-Ng, J.; Obst-Hübl, L.; Rehwald, M.; Schlenvoigt, H.-P.; Siebold, M.; Zeil, K.; Ziegler, T.; Schramm, U.

High-intensity short-pulse lasers in the Petawatt regime offer the possibility to study new compact accelerator schemes by utilizing high-density targets for the generation of energetic ion beams. The optimization of the acceleration process demands comprehensive exploration of the plasma dynamics involved, for example via optical probing. In particular, experiments using low density cryogenic hydrogen jet targets with µm-scale transverse size are well suited to deliver new results which can then be compared to predictive particle-in-cell simulations. However, strong plasma self-emission and conversion of the plasma’s drive laser wavelength into its harmonics often masks the interaction region and complicates data analysis. Here, we present a stand-alone probe laser system operating at 1030 nm, far off the plasma’s drive laser wavelength of 800 nm and its implementation into an experiment dedicated to laser-proton acceleration from the hydrogen jet target irradiated by the DRACO PW laser at Helmholtz-Zentrum Dresden – Rossendorf. We show that the plasma self-emission in the probe images is significantly suppressed and we are able to measure the pre-expansion of the target by the DRACO PW laser for intrinsic and for plasma mirror enhanced laser contrast. The influence of the plasma pre-expansion on the measured proton acceleration performance is presented.

Keywords: optical probing; laser; laser particle acceleration

  • Lecture (Conference)
    European Advanced Accelerator Concepts Workshop, 15.-20.09.2019, Isola d'Elba, Italy

Permalink: https://www.hzdr.de/publications/Publ-30212
Publ.-Id: 30212


Antigen-specific redirection of immune effector cells against GD2-expressing tumors

Metwasi, N.

Extensive research in the last decades has revealed the dynamic role of the immune system in surveillance, recognition and elimination of cancer cells. However, resistant variants can rise and overcome these immune responses by various escape mechanisms. Therefore, huge efforts have been invested in developing of immunotherapies that can overcome these hurdles and allow the specific activation and retargeting of immune cells toward tumor cells. Immunotherapy includes diverse strategies ranging from cytokines to antibodies and their derivatives reaching to engineered immune cells.
One of the very promising immunotherapeutic approaches is based on the engineering of T cells to express chimeric antigen receptors (CARs) which can redirect immune cells to specific antigens leading to T cell activation and subsequent killing of target cells. The CAR technology has shown a strong therapeutic potential in targeting of cancer both in preclinical as well as clinical studies, especially with hematological malignancies, which lead to FDA approval of CD19-specific CAR T cells for the treatment of leukemia. Despite the success of CAR T cells, clinical trials have also revealed various toxicities and adverse events that can be life-threatening for patients. Moreover, the CAR technology still faces many hurdles to achieve an effective targeting of solid tumors due to the structure, immunosuppressive microenvironment and heterogeneity of the disease. Therefore, a novel modular and switchable CAR platform, called the UniCAR system, was developed in the group of Prof. Bachmann in order to address these obstacles. The UniCAR system consists of UniCAR T cells that cannot bind surface antigens. Instead, UniCARs recognize an epitope (E5B9) which is derived from the nuclear protein La-SS/B. Therefore, UniCAR T cells can only be redirected via target modules (TMs) that have the E5B9 tag on one hand and an antigen-binding domain on the other hand. These TMs provide a bridge with tumor cells that allow the activation of UniCAR T cells. Once these TMs are eliminated, the UniCAR T cells can no more be activated, and thus they are switched off. This approach provides not only a safety switch but also a flexible platform for multi-targeting of diverse antigens by using various TMs with different antigen specificities. Alternatively, the UniCAR system can be applied on NK cells or NK cell lines, which have a natural anti-tumor response. Cell lines like NK-92 are of especial interest because they can be used allogenically, and thus provide an off-the-shelf therapy that might reduce the cost and time of therapy development.
For my thesis work, disialoganglioside GD2 was selected as a target for the UniCAR system. GD2 is overexpressed on many tumors including neuroblastoma, Ewing’s sarcoma, melanoma, osteosarcoma and others. In fact, GD2 is considered as one of the priority antigens to be targeted for cancer therapy according to a pilot project of the national cancer institute. Moreover, targeting GD2 with CAR T cells has shown very positive clinical outcome in previously published clinical trials. However, as other tumor-associated antigens, GD2 has also some limited expression on normal tissues including some regions of the central nervous system and peripheral nerves. Therefore, using a safety switch like the UniCAR system emerges as a necessary step to assure better controlling of any on-target/off-tumor side effects.
Driven by these facts, several formats of anti-GD2 TMs were developed in order to redirect UniCAR T cells to GD2-expressing tumors. Three TMs were designed based on a single chain fragment variable (scFv) connected to the E5B9 epitope. However, they differed in the orientation of the variable light and variable heavy chain domains and their linker components in order to find the best functional conformation. In vitro functional assays showed that all of the three TMs were able to redirect UniCAR T cells toward tumor cells leading to efficient tumor cell killing and release of cytokines in an antigen-specific and TM-dependent manner. Furthermore, the TMs showed dose-dependent killing with half-maximal effective concentration (EC50) in the picomolar range. As all the TM formats showed comparable results in vitro, further in vivo studies were restricted to one TM. This anti-GD2 TM was able to activate UniCAR T cells to eradicate GD2-positive tumor cells in experimental mice. Furthermore, the TM was modified and radiolabeled with 64Cu, in order to investigate its pharmacokinetic properties and biodistribution in tumor-bearing mice. PET analysis of the radiolabeled anti-GD2 TM showed enrichment in the GD2-expressing tumors with blood elimination half-life of less than one hour, which makes it a suitable key for a fast safety switch of UniCAR T cells.
In contrast to UniCAR T cells, the UniCAR NK-92 cell line provides an-off-the shelf therapy that can be expanded for allogenic use. Since these cells are usually irradiated before infusion into patients, their life-span as well as the possibility of side effects is reduced. Therefore, we have further created an IgG4-based anti-GD2 TM with an extended half-life that fits to the life-span of irradiated NK-92 cells. PET imaging of the radiolabeled IgG4-based TM showed an increase in the half-life of about 24 folds in comparison to the scFv TM format. Further testing has shown that UniCAR NK-92 cells are functional with both scFv- and IgG4-based TM formats leading to specific killing of GD2-expressing tumor cells as well as secretion of pro-inflammatory cytokines in vitro. In addition, UniCAR NK-92 showed specific killing of tumor cells in vivo when combined with the anti-GD2 TM.
In summary, we have shown that the UniCAR system can be used to redirect both T cells and NK-92 cells against GD2-expressing tumors in vitro as well as in vivo in an antigen-specific and TM-dependent manner. The UniCAR system allows an on/off safety switch as well as fine controlling of the activity of UniCAR T/NK-92 cells via titration (dosing) of the anti-GD2 TMs. Furthermore, it provides a flexible platform that allows the use of several antibody formats for an effective and safe targeting of cancer.

  • Doctoral thesis
    HZDR, 2019

Permalink: https://www.hzdr.de/publications/Publ-30211
Publ.-Id: 30211


Off-harmonic optical probing of high intensity laser interaction with hydrogen targets using a stand-alone probe laser system

Bernert, C.; Kraft, S.; Löser, M.; Metzkes-Ng, J.; Obst-Hübl, L.; Rehwald, M.; Schlenvoigt, H.-P.; Siebold, M.; Zeil, K.; Ziegler, T.; Schramm, U.

The development of high-intensity short-pulse lasers in the Petawatt regime offers the possibility to design new compact accelerator schemes by utilizing high-density targets for the generation of ion beams with multiple 10 MeV energy per nucleon. The optimization of the acceleration process demands comprehensive exploration of the plasma dynamics involved, for example via spatially and temporally resolved optical probing. Experimental results can then be compared to numerical particle-in-cell simulations, which is particularly sensible in the case of cryogenic hydrogen jet targets. However, strong plasma self-emission and conversion of the plasma’s drive laser wavelength into its harmonics often masks the interaction region and interferes with the data analysis. Recently, the development of a stand-alone and synchronized probe laser system for off-harmonic probing at the DRACO laser operated at the Helmholtz-Zentrum Dresden–Rossendorf showed promising performance.
Here, we present an updated stand-alone probe laser system applying a compact CPA system based on a synchronized fs mode-locked oscillator operating at 1030 nm, far off the plasma’s drive laser wavelength of 800 nm. A chirped volume Bragg grating (Optigrate Corp) is used as a hybrid stretcher and compressor unit. The system delivers 160 fs pulses with a maximum energy of 0.9 mJ. By deploying the upgraded probe laser system in the laser-proton acceleration experiment with the renewable cryogenic hydrogen jet target, the plasma self-emission could be significantly suppressed while studying the temporal evolution of the expanding plasma jet. Recorded probe images resemble those of z-pinch experiments with metal wires and indicate a sausage-like instability along the jet axis, which will be discussed.

Keywords: optical probing; laser; laser particle acceleration

  • Lecture (Conference)
    SPIE Optics + Optoelectronics 2019, 01.-04.04.2019, Prague, Czech Republic

Permalink: https://www.hzdr.de/publications/Publ-30210
Publ.-Id: 30210


Stand-alone laser system for off-harmonic optical probing of high intensity laser interaction with cryogenic hydrogen jet targets

Bernert, C.; Kraft, S.; Löser, M.; Metzkes-Ng, J.; Obst-Hübl, L.; Rehwald, M.; Schlenvoigt, H.-P.; Siebold, M.; Zeil, K.; Ziegler, T.; Schramm, U.

The availability of high-intensity short-pulse lasers in the Peta-Watt regime drives the development of new and compact accelerator schemes like for example the generation of multiple 10 MeV proton beams from high-density targets. To optimize the acceleration performance and to pave the way towards medical applications of these particle beams both target and diagnostic development are of great importance. Particularly cryogenic hydrogen jet-targets offer the benefit of being debris-free and capable of high-repetition rate applications. Together with spatially and temporally resolved optical probing techniques this target is most suitable for a comparison to numerical particle-in-cell simulations. However, the strong plasma self-emission often masks the laser-target interaction point and thus complicates the data analysis. Recently, the development of a synchronized stand-alone probe-laser-system operating off the harmonics of the driver laser showed promising performance.
Here we show the performance of an upgraded probe-laser-system operating at a central wavelength of 1030nm far off the fundamental wavelength of the drive laser at 800nm. It consists of a synchronized fs-oscillator and a novel and robust CPA system based on a chirped volume Bragg grating as a hybrid stretcher and compressor unit, chirped mirrors for GDD compensation and a regenerative amplifier with Yb.CaF2 as laser medium. The system delivers 160fs pulse duration together with 0.9mJ energy at a repetition rate of 200Hz.
The application of the upgraded probe-laser-system in an experimental campaign dedicated to laser-proton acceleration together with cryogenic hydrogen jet-targets showed a significant improvement of imaging quality for the laser-target interaction concerning the plasmas self-emission. The recorded probe-images resemble those of z-pinch experiments with metal wires and indicate a sausage-like instability along the hydrogen jet axis.

Keywords: optical probing; laser; particle acceleration

  • Open Access Logo Lecture (Conference)
    DPG Frühjahrstagung, 17.-22.03.2019, München, Deutschland

Permalink: https://www.hzdr.de/publications/Publ-30209
Publ.-Id: 30209


Introducing a novel switchable CAR platform with reduced CAR size for immunotherapy of tumors

Hoffmann, A.; Feldmann, A.; Kittel-Boselli, E.; Bergmann, R.; Koristka, S.; Berndt, N.; Arndt, C.; Loureiro, L. R.; Bachmann, M.

1. Introduction
Recently the use of chimeric antigen receptor (CAR) modified T cells in the immunotherapy of tumors has become a promising approach. CAR T cells are able to recognize tumor-associated antigens (TAAs) in a major histocompatibility-complex (MHC)-independent manner. Although highly efficient, the inability to regulate the activity of CAR T cells can cause severe side effects and thus needs to be considered in future developments. Here, we introduce the RevCAR system – a novel switchable modular universal CAR system having a minimal size to overcome the obstacles of conventional CAR therapy.
2. Objectives
In order to improve the controllability of CAR T cells a modular CAR system, which allows switching the activity of CAR T cells repeatedly “ON” and “OFF”, was generated. Furthermore, to avoid unspecific side effects and minimize tonic signaling of conventional CAR T cells, the extracellular single chain variable fragment (scFv) was removed. Thus, resulting RevCARs have a smaller size allowing “gated” targeting strategies, e.g. by facilitating simultaneous transduction of two independent CARs with different specificities and split motifs, which could further improve the safety of CAR T cells.
3. Materials & methods
In order to reduce the size of the artificial receptor the original idea was to replace the extracellular scFv domain of a conventional CAR with a small peptide epitope and to engage the resulting RevCAR
T cell via a bispecific target module which we termed RevTM. For proof of concept two small peptide epitopes were selected and the respective RevCARs constructed. In addition, a series of different RevTMs was generated. On the one hand the RevTM recognizes one of the two peptide epitopes on the other hand the RevTM can be directed to any potential TAA.
4. Results
Until now a series of RevTMs was constructed and functionally analyzed. RevCAR T cells armed via the respective RevTM were able to efficiently lyse their respective target cells in a peptide epitope and target specific, as well as target module dependent manner. These data are supported by the analysis of cytokine secretion from RevCAR T cells which was only observed in the presence of both target cells and the respective RevTM.
5. Conclusion
Taken together these results demonstrate the high anti-tumor efficiency of the novel RevCAR platform which is characterized by a small size, an improved safety, easy controllability as well as high flexibility.

  • Open Access Logo Abstract in refereed journal
    European Journal of Immunology 49(2019), 266-267
    DOI: 10.1002/eji.201970300
  • Poster
    Annual Meeting of the German Society for Immunology (DGfI 2019), 10.-13.09.2019, München, Deutschland

Downloads

Permalink: https://www.hzdr.de/publications/Publ-30208
Publ.-Id: 30208


Convective and Surface Tension Sub-Filter Scale Models

Meller, R.; Klein, M.; Lucas, D.; Schlegel, F.

Industrial applications feature a huge variety of different flow patterns, such as bubbly flow, slug flow or annular flow. Thereby the issue of a big range of different physical scales is involved. With the objective of reproduction of occurring phenomena with one single multifluid solver, we present an Euler-Euler-approach, which combines a number of different methods for treatment of the partial aspects. The implementation into OpenFOAM is always with focus on sustainable research. A segregated approach is used for treatment of the phase momentum equations, phase fraction equations and the pressure equation, featuring a consistent momentum interpolation scheme (Cubero et al., 2014). To fulfill the kinematic condition at resolved interfaces between different continuous phases, the latter may be coupled by an isotropic drag (Strubelj and Tiselj, 2011). In this case, the immensely strong phase coupling requires an adapted numerical method. The overall objective is to take interactions between the all different aspects, such as disperse phases, resolved interfaces and turbulence with effects on momentum and mass transfer into account.

  • Lecture (others)
    Seminar des Instituts für Mathematik und Rechneranwendungen der Universität der Bundeswehr München, 05.11.2019, München, Deutschland

Permalink: https://www.hzdr.de/publications/Publ-30207
Publ.-Id: 30207


(+)-[18F]Flubatine as a novel α4β2 nicotinic acetylcholine receptor PET ligand – Results of the first-in-human brain imaging application in patients with β-amyloid PET-confirmed Alzheimer’s disease and healthy controls

Tiepolt, S.; Becker, G.-A.; Wilke, S.; Cecchin, D.; Rullmann, M.; Meyer, P. M.; Barthel, H.; Hesse, S.; Patt, M.; Luthardt, J.; Wagenknecht, G.; Sattler, B.; Deuther-Conrad, W.; Ludwig, F.-A.; Fischer, S.; Gertz, H.-J.; Smits, R.; Hoepping, A.; Steinbach, J.; Brust, P.; Sabri, O.

The cerebral cholinergic system is involved in several cognitive processes and neuropsychiatric 2 diseases. For research purposes and later on in routine clinical settings new PET radioligands with more favorable characteristics than the established 3-pyridylether derivatives with their slow kinetics are necessary. Here we present the first in-human brain PET imaging data of the new α4β2 nicotinic acetylcholine receptor (nAChR)-targeting radioligand (+)-[18F]Flubatine. Primary aim of this study was to develop a kinetic modeling-based approach to quantify the α4β2 nAChR availability in the human brain and to compare respective data of healthy controls (HCs) with those of patients with Alzheimer’s disease (AD). Secondary aims were to investigate whether (+)-[18F]Flubatine binding was correlated to cognitive test data or β-amyloid radiotracer accumulation. Furthermore, the partial volume effect (PVE) on regional (+)-[18F]Flubatine binding was investigated. We examined 11 non-smoking HCs and 9 non-smoking patients with mild AD without anti-dementive drugs. Prior to (+)-[18F]Flubatine PET, all subjects underwent an extensive neuropsychological testing and a β-amyloid [11C]PiB PET/MRI examination. To evaluate the (+)-[18F]Flubatine PET data, we used full kinetic modeling (one and two tissue compartment 16 modeling (1TCM and 2TCM)) and regional as well as voxel-based analyses. 270 min p.i., the unchanged parent compound in arterial blood amounted to 97±2%. As revealed by regional analysis, (+)-[18F]Flubatine distribution volume (binding) was significantly reduced in the bilateral mesial temporal cortex in AD patients compared to HCs (right: AD: 10.6±1.1 vs HC: 11.6±1.4, p=0.049; left: AD: 11.0±1.1 vs HCs:12.2±1.8, p=0.046). Voxel-based analysis detected further clusters of reduced (+)-[18F]Flubatine in left precuneus/posterior cingulate cortex, right superior temporal and left middle temporal cortex (k>30, p<0.001). PVE correction revealed an increase of regional (+)-[18F]Flubatine binding of approximately 15% but also an increase of the standard deviation of 0.4-70% resulting in a loss of statistical significances. Thus, we also estimated the cortical thickness to investigate whether cortical atrophy significantly affects the regional (+)-[18F]Flubatine binding. Here, we found that mesial temporal cortical thickness did not correlate with (+)-[18F]Flubatine binding (right: r=0.10, p=0.69; left: r=0.17, p=0.48). Using a reference region (occipital cortex), also the right parietal cortex showed reduced relative (+)-[18F]Flubatine binding in AD patients compared to HCs (1.1±0.1 vs. 1.2±0.1, p=0.033). Cognitive test data and (+)-[18F]Flubatine binding were significantly correlated in left anterior cingulate cortex, right posterior cingulate cortex and right parietal cortex (r>0.5, p<0.05 each). In the AD patients, (+)-[18F]Flubatine binding and [11C]PiB standardized uptake value ratios were negatively correlated in several regions, whereas in HCs a positive correlation between cortical (+)-[18F]Flubatine binding and [11C]PiB accumulation in the white matter was found. No serious adverse events were registered, and seven adverse events which were not related to the investigational product. Taken together, (+)-[18F]Flubatine is a safe and stable PET ligand. Full kinetic modeling of the PET data can be realized by 1TCM without metabolite correction. (+)-[18F]Flubatine binding affinity was high enough to detect group differences without the use of a reference region. However, the use of the occipital cortex as reference region increased the sensitivity. Of interest, correlation between white matter β-amyloid PET uptake and (+)-[18F]Flubatine binding indicated a connection between white matter integrity and availability of α4β2 nAChRs. Overall, (+)-[18F]Flubatine showed favorable characteristics and has therefore the potential to serve as α4β2 nAChR-targeting PET ligand in further clinical trials.

Keywords: (+)-[18F]Flubatine; α4β2 nicotinic acetylcholine receptors; human brain; kinetic modeling; PET; (+)-[18F]NCFHEB

Permalink: https://www.hzdr.de/publications/Publ-30206
Publ.-Id: 30206


A-Posteriori Assessment of Sub-Filter Scale Models for Turbulence-Interface Interaction with the Two-Fluid Formulation Considering a Single Rising Gas Bubble in Liquid

Meller, R.; Klein, M.; Lucas, D.; Schlegel, F.

Gas-liquid flows are of great importance for a large number of different industrial applications, e.g. in energy sector or metal processing industry. From there arises a strong need for numerical tools, which help to predict dynamics of two-phase flows in technical facilities with high predictive accuracy, reasonable computational expense and without any need for initial knowledge of the present flow regime. A big challenge in investigations of such problems is the large range of interfacial and turbulent scales, which need to be accounted for in numerical simulations. A typical approach to capture all these dynamics and their interactions are multi-scale multi-regime methods, which make use of coupling of different individual modeling concepts.
The overall aim is to adopt the hybrid approach of H ̈ ansch et al. (2012), which combines an Eulerian-Eulerian approach with a volume-of-fluid(VOF)-like method in a two-fluid model in order to represent interfacial structures on subgrid-scale and on grid-scale, respectively. In situations, where transitions between different morphologies occur, interfacial structures appear to be too large for an Eulerian-Eulerian model approach and, at the same time, too small for the flow dynamics to be fully resolved in a VOF-like model. In other words, in the range of mesh scale and slightly above, interfacial and turbulent structures need to be simulated in an under-resolved manner. For this to deliver physically reasonable results, modeling of subgrid-scale (SGS) dynamics becomes necessary.

Related publications

  • Contribution to proceedings
    Direct and Large Eddy Simulation 12 (DLES12), 05.-07.06.2019, Madrid, Spanien
    ERCOFTAC Series: Direct and Large-Eddy Simulation XII, Cham, Switzerland: Springer, 978-3-030-42821-1, 167-173
    DOI: 10.1007/978-3-030-42822-8
  • Lecture (Conference)
    Direct and Large Eddy Simulation 12 (DLES12), 05.-07.06.2019, Madrid, Spanien

Permalink: https://www.hzdr.de/publications/Publ-30205
Publ.-Id: 30205


On the enstrophy in a precessing cylinder

Pizzi, F.; Giesecke, A.; Stefani, F.

Within the project DRESDYN (DREsden Sodium facility for DYNnamo and thermohy-
draulic studies) a precession driven a fluid flow of liquid sodium will be examined with regard
to the possibility of serving as source for magnetic field generation. Hydrodynamic studies
and simulations are essential to understand the behaviour of the fluid flow. Here we present
the direct numerical simulations of a fluid flow forced by precession conducted in a cylindrical
domain, with the focus on the relation between dissipation and enstrophy.

Keywords: Precessing Cylinder; enstrophy; flow field

  • Open Access Logo Invited lecture (Conferences)
    9th European Postgraduate Fluid Dynamics Conference, 16.-19.07.2019, Ilmenau, Germany

Permalink: https://www.hzdr.de/publications/Publ-30204
Publ.-Id: 30204


The Dresdyn Precession Dynamo Experiment

Pizzi, F.; Giesecke, A.; Gundrum, T.; Vogt, T.; Stefani, F.

In the most ambitious experiment of DRESDYN (DREsden Sodium facility
for DYNnamo and thermohydraulic studies) a fluid flow of liquid sodium, solely driven
by precession, will be considered as a possible source for magnetic field generation. Here,
after the description of the experimental facility, we are going to present the results (in
particular the hydrodynamic ones) from the direct numerical simulation conducted in a
cylindrical domain. We will discuss the dynamics of the system and show that the m = 1
Kelvin mode is crucial for the dynamo action. The second part will be dedicated to the
influence of the nutation angle; finally we will quantify the dissipation and the role of
turbulent fluctuations on the flow.

Keywords: cylinder; dissipation; dynamo; precession; turbulence

  • Contribution to proceedings
    11 th PAMIR International Conference - Fundamental and Applied MHD, 01.-05.07.2019, Reims, France
  • Invited lecture (Conferences)
    11 th PAMIR International Conference - Fundamental and Applied MHD, 01.07.2019, Reims, France

Permalink: https://www.hzdr.de/publications/Publ-30202
Publ.-Id: 30202


Start-to-end simulations of L|PWFA hybrid accelerator experiments using PIConGPU

Pausch, R.; Debus, A.; Steiniger, K.; Garten, M.; Hübl, A.; Widera, R.; Kurz, T.; Schöbel, S.; Couperus Cabadağ, J. P.; Chang, Y.-Y.; Köhler, A.; Zarini, O.; Heinemann, T.; Gilljohann, M. F.; Ding, H.; Götzfried, J.; Döpp, A.; Kononenko, O.; Raj, G.; Martines De La Ossa, A.; Assmann, R.; Hidding, B.; Karsch, S.; Code, S.; Irman, A.; Schramm, U.; Bussmann, M.

The poster gives an overview of the LPWFA experimental setup and explains in detail the accompanying simulation campaign.

Keywords: LPWFA; hybrid; PIConGPU; ISAAC; alpaka

  • Poster
    CASUS Eröffnungsworkshop, 26.-28.08.2019, Görlitz, Deutschland

Permalink: https://www.hzdr.de/publications/Publ-30200
Publ.-Id: 30200


Current status of the L|PWFA start-to-end simulations using PIConGPU

Pausch, R.; Debus, A.; Steiniger, K.; Garten, M.; Widera, R.; Bussmann, M.

A summary of the LPWFA simulations of the last half year as performed within the hybrid collaboration.

Keywords: PIConGPU; LPWFA; hybrid

  • Lecture (others)
    LPWFA hybrid-collaboration meeting, 04.-05.07.2019, Glasgow, United Kingdom

Permalink: https://www.hzdr.de/publications/Publ-30199
Publ.-Id: 30199


Ultra-intense laser pulse characterization using ponderomotive electron scattering.

Mackenroth, F.; Holkundkar, A.; Schlenvoigt, H.-P.

We present a new analytical solution for the equation of motion of relativistic electrons in the focus of a high-intensity laser pulse. We approximate the electron's transverse dynamics in the averaged field of a long laser pulse focused to a Gaussian transverse profile. The resultant ponderomotive scattering is found to feature an upper boundary of the electrons' scattering angles, depending on the laser parameters and the electrons' initial state of motion. In particular, we demonstrate the angles into which the electrons are scattered by the laser scale as a simple relation of their initial energy to the laser's amplitude. We find two regimes to be distinguished in which either the laser's focusing or peak power are the main drivers of ponderomotive scattering. Based on this result, we demonstrate how the intensity of a laser pulse can be determined from a ring-shaped pattern in the spatial distribution of a high-energy electron beam scattered from the laser. We confirm our analysis by means of detailed relativistic test particle simulations of the electrons' averaged ponderomotive dynamics in the full electromagnetic fields of the focused laser pulse.

Downloads

Permalink: https://www.hzdr.de/publications/Publ-30198
Publ.-Id: 30198


Characterization of laser-driven proton acceleration from water microdroplets

Becker, G. A.; Schwab, M. B.; Lötzsch, R.; Tietze, S.; Klöpfel, D.; Rehwald, M.; Schlenvoigt, H.-P.; Sävert, A.; Schramm, U.; Zepf, M.; Kaluza, M. C.

We report on a proton acceleration experiment in which high-intensity laser pulses with a wavelength of 0.4 μm and with varying temporal intensity contrast have been used to irradiate water droplets of 20 μm diameter. Such droplets are a reliable and easy-to-implement type of target for proton acceleration experiments with the potential to be used at very high repetition rates. We have investigated the influence of the laser’s angle of incidence by moving the droplet along the laser polarization axis. This position, which is coupled with the angle of incidence, has a crucial impact on the maximum proton energy. Central irradiation leads to an inefficient coupling of the laser energy into hot electrons, resulting in a low maximum proton energy. The introduction of a controlled pre-pulse produces an enhancement of hot electron generation in this geometry and therefore higher proton energies. However, two-dimensional particle-in-cell simulations support our experimental results confirming, that even slightly higher proton energies are achieved under grazing laser incidence when no additional pre-plasma is present. Illuminating a droplet under grazing incidence generates a stream of hot electrons that flows along the droplet’s surface due to self-generated electric and magnetic fields and ultimately generates a strong electric field responsible for proton acceleration. The interaction conditions were monitored with the help of an ultra-short optical probe laser, with which the plasma expansion could be observed.

Downloads

Permalink: https://www.hzdr.de/publications/Publ-30197
Publ.-Id: 30197


Standing inertial waves, energy scaling and dissipation in precession driven flows

Giesecke, A.; Pizzi, F.; Gundrum, T.; Vogt, T.; Stefani, F.

A precession dynamo experiment is currently under construction at
Helmholtz-Zentrum Dresden-Rossendorf (HZDR). The experiment is
motivated by the question whether the geodynamo or the ancient lunar
dynamo were powered by a flow driven by precession instead of
or in addition to convection. In the present study we address related
numerical simulations in order to characterize the hydrodynamic flow
field and to make energetic estimations that allow conclusions on the
global power balance.

Simulations of precessing fluids in cylindrical geometry show that
precession is an efficient mechanism to drive substantial flows even
on the lab scale. Using the time-averaged flow field obtained in these
simulations, kinematic dynamo models exhibit dynamo action at
parameters that are well within the range of the planned dynamo
experiment. Our analysis further shows that the standing inertial
wave directly excited by precession is responsible for the magnetic
field excitation when the forcing is sufficiently strong, so that
nonlinear interactions modify the flow and contributions beyond the
resonant Kelvin mode become important. This requires large precession
ratios with the Poincare number (the ratio of precession
frequency to rotation frequency) above Po = 0.10. At this
value we observe an abrupt transition of the flow into a turbulent
behavior with large-scale flow structures becoming less significant.
Our simulations give a detailed characterization of the corresponding
transition. The scaling of global quantities, like flow amplitudes and
energies as well as the laminar and the turbulent dissipation are used
to constrain the energetics of the magnetic field generation and to
predict the most promising parameter regimes suitable for dynamo
action including the specific magnetic field pattern that may emerge
in the planned dynamo experiment.

Keywords: Dynamo; DRESDYN; Precession

  • Lecture (Conference)
    AGU Fall Meeting, 08.-13.12.2019, San Francisco, USA

Permalink: https://www.hzdr.de/publications/Publ-30196
Publ.-Id: 30196


Synchronization in mean field dynamo models

Giesecke, A.; Seilmayer, M.; Stefani, F.; Weier, T.

Synchronization is a fundamental phenomenon in nonlinear dynamical systems.
In my presentation I will refer to essential features of synchronized
systems with focus on a kinematic dynamo model driven by two
counter-rotating disks including weak periodic perturbations. Similar
concepts can be used to explain the behavior of triadic resonances in a
precession driven flow, which may be seen as a precursor for the
transition into a turbulent regime found at a critical precession ratio
in the DRESDYN water experiment. Finally, I show the connection to the
synchronized solar dynamo model presented by Frank Stefani, where the
magnetic field frequencies are determined by the tidal forces caused by
planets surrounding the sun.

Keywords: Dynamo; Synchronization

  • Lecture (Conference)
    Dynamo Thinkshop, 25.-26.12.2019, Rom, Italien

Permalink: https://www.hzdr.de/publications/Publ-30195
Publ.-Id: 30195


Inverse Problems in (nonlinear) Magnetohydrodynamics

Giesecke, A.

Modal acoustic velocimetry and time-of-flight tomography require
inversion of measurement data for determination of 3D velocity fields.
Another example is the Inductive flow tomography that allows the estimatation
of flow structures in an electrically conducting fluid impacted by an imposed
magnetic field.

Keywords: Magnetohydrodynamics

  • Lecture (Conference)
    Symposium "Domain Coupling with Workflow-supported Algorithms of Artificial Intelligence", 29.05.2019, Berlin, Deutschland

Permalink: https://www.hzdr.de/publications/Publ-30194
Publ.-Id: 30194


Euler-Euler Multiphase Flow Simulation @ HZDR

Rzehak, R.

Research on multiphase flows has a long history at Helmholtz-Zentrum Dresden - Rossendorf. Concerning simulations we focus on the Euler-Euler method, which facilitates CFD simulations on the scale of technical equipment by applying the two-fluid framework of interpenetrating continua. Since phenomena occurring on the scale of individual bubbles or groups thereof are not resolved in this approach, accurate numerical predictions rely on suitable closure relations describing the physics of these small-scale phenomena. Development and validation of such closure relations are a core focus of our research.
A brief general overview of topics and methods will be given, followed by a collection of specific application examples. The latter center around dispersed multiphase flows in different types of equipment commonly encountered in chemical engineering, minerals processing, and biotechnology. The fluid dynamics of bubbly flow are covered in greater detail highlighting the modeling of bubble forces, bubble-induced turbulence as well as bubble-coalescence and breakup. Less comprehensive results are shown for reactive mass-transfer and particulate flows.

Keywords: disperse gas-liquid multiphase flow; Euler-Euler two-fluid model; fluid dynamics; mass transfer; chemical reaction; CFD simulation; validation

  • Lecture (Conference)
    Institute Seminar, 13.12.2019, Magdeburg, Deutschland

Permalink: https://www.hzdr.de/publications/Publ-30193
Publ.-Id: 30193


Euler-Euler Simulation of Bubbly Flow in Stirred Tanks

Rzehak, R.; Shi, P.

Aerated stirred tanks are frequently used equipment in industries ranging from chemical engineering and biotechnology to minerals processing. In principle, CFD simulation of such equipment on industrial scales is feasible within the Euler-Euler framework of interpenetrating continua. Practical application, however, requires suitable closure models to account for phenomena on the scale of individual bubbles, which are not resolved in this approach. Validation of such models is the purpose of the present contribution.

Keywords: aerated stirred tanks; dispersed gas-liquid multiphase flow; Euler-Euler two-fluid model; closure relations; Reynolds-stress turbulence model; CFD simulation

  • Lecture (Conference)
    ECCE12 & ECAB5, 15.-19.09.2019, Florence, Italy

Permalink: https://www.hzdr.de/publications/Publ-30192
Publ.-Id: 30192


TEM investigation of Compact Tellurium Thin Films with Bismut Atomic Doping

Damm, C.; Guodong, L.; Hübner, R.; Nielsch, K.

Compact tellurium (Te) thin films show important applications in micro-thermoelectric modules, which are able to convert waste heat to electrical energy (μTEG) or vice versa to use electricity to generate cooling (μTEC). The as-fabricated μTECs, which are based on electrochemically deposited n-type Bi2(TexSe1-x)3 (in short BiTeSe) and p-type tellurium, demonstrate a rapid response time of 1ms, a high cycling reliability of up to 10 million cycles and a long-term cooling stability of more than 1 month at constant electric current. However, a mismatch of electrical conductivity between pure Te and BiTeSe often leads to some difficulties in the geometry design of micro-thermoelectric modules. In order to enhance the electrical property of Te, we have introduced an atomic bismuth (Bi) doping.

In this report, we have performed transmission electron microscopy (TEM, FEI Tecnai G2/ 200 kV) analysis to observe the presence and distribution of Bi within Te. To this end, cross-sectional TEM specimens were prepared using the Focused Ion Beam technique (FIB, FEI Helios NanoLab 600i). The Bi-doped Te samples have a columnar grain structure. Selected-area electron diffraction proves the presence of crystalline Te. Results of Nanodiffraction in numerous areas also suggest Te (hexagonal, space group 152, a = b = 0,4458 nm, c = 0,5925 nm, α = ß = 90°, γ = 120°) but could be explained with Bi (rhomboedral, space group 166, a = b = 0,4550 nm, c = 1,1850 nm, α= ß = 90°, γ = 120°), too. Unfortunately, the geometry of the Bi and Te unit cells differ only in the length of the c-axis. In addition, HRTEM images show lattice fringes, which could belong to Bi or Te. To unambiguously distinguish between both elements, chemical analysis is necessary.

Performing energy-dispersive X-ray spectroscopy (EDXS) analysis with a conventional Si(Li) detector, no Bi counts appear in the EDX spectra during reasonable measuring times of several minutes. To finally get the distribution of Bi in the Te matrix, we employed a FEI Talos F200X microscope operated at 200 kV and equipped with an X-FEG electron source and a Super-X EDX detector system and performed spectrum imaging analysis based on EDXS.

Related publications

  • Poster
    Microscopy Conference MC 2019, 01.-05.09.2019, Berlin, Germany

Permalink: https://www.hzdr.de/publications/Publ-30191
Publ.-Id: 30191


Investigation on the working mechanism of the nitrile based sulfide collector Tecflote

Schach, E.; Lewis, A.; Rudolph, M.

Tecflote is a new group of nitrile-based collectors for sulphide flotation. The fact that it is insoluble in water results in some interesting implications for its actual working mechanism. It can be assumed that the Tecflote-molecules are adsorbed in the air water interface having first contact with the mineral surface during the particle bubble collision rather than conventional theories where particles are hydrophobized within the pulp in a conditioning step. Therefore, the adsorption of Tecflote and the spreading of the three-phase contact line between the mineral surface and the air bubble must be related to each other. Different investigations including contact angle measurements and AFM studies are conducted to obtain a better understanding of the working mechanism of Tecflote. Due to the insoluble character, the Langmuir-Blodgett technique is used to investigate the behaviour of Tecflote in the air-water interface and to deposit layers of Tecflote on mineral substrates for the above-mentioned studies.

  • Lecture (Conference)
    Flotation '19, 11.-14.11.2019, Kapstadt, Südafrika

Permalink: https://www.hzdr.de/publications/Publ-30190
Publ.-Id: 30190


A Recirculation Cell Approach for Hydrodynamic and Mass Transfer Modeling in Bubble Columns with and without Internals

Möller, F.; Dehmelt, T.; Schmidt, N.; Lau, Y. M.; Hampel, U.; Schubert, M.

An advanced recirculation cell model is proposed, which describes fluid dynamics and mass transfer in bubble columns with and without internals. The new model incorporates the cell approach of Shimizu et al. [Chem. Eng. J. 2000, 78, 21-28.] with latest breakup and coalescence kernels. Additionally, the gas flow structure is divided according to the two-bubble class assignment with fast-rising large bubbles in the column center and descending small bubbles near the wall following the liquid circulation pattern within the column’s cross-section. The effect of internals is considered dividing the column further into ‘sub-columns’ derived from the internals’ radial profile, which physically refines the liquid circulation pattern. The model was validated with experimental data of Möller et al. [Chem. Eng. Sci. 2018, 179,265-283; Chem. Eng. Res. Des. 2018, 134; Chem. Eng. Sci. 2019] for narrow (0.1 m diameter) and pilot-scale (0.39 m diameter) columns, respectively, with and without internals operated up to the well-developed churn-turbulent flow regime. Predictions for bubble size distribution, total gas holdup, Sauter mean diameter as well as interfacial area and volumetric mass transfer coefficients agree well with the experiments.

Keywords: Bubble column; tube bundle internals; recirculation cell model; two-bubble class approach; hydrodynamics; mass transfer

Downloads

Permalink: https://www.hzdr.de/publications/Publ-30189
Publ.-Id: 30189


WKB approach to pair creation in spacetime-dependent fields: The case of a spacetime-dependent mass

Oertel, J.; Schützhold, R.

Besides tunneling in static potential landscapes, for example, the Wentzel-Kramers-Brillouin (WKB) approach is a powerful nonperturbative approximation tool to study particle creation due to time-dependent background fields, such as cosmological particle production or the Sauter-Schwinger effect, i.e., electron-positron pair creation in a strong electric field. However, our understanding of particle creation processes in background fields depending on both space and time is rather incomplete. In order to venture into this direction, we propose a generalization of the WKB method to truly spacetime-dependent fields and apply it to the case of a spacetime-dependent mass.

Downloads

Permalink: https://www.hzdr.de/publications/Publ-30188
Publ.-Id: 30188


Boltzmann relaxation dynamics in the strongly interacting Fermi-Hubbard model

Queißer, F.; Schützhold, R.

Via the hierarchy of correlations, we study the Mott insulator phase of the Fermi-Hubbard model in the limit of strong interactions and derive a quantum Boltzmann equation describing its relaxation dynamics. In stark contrast to the weakly interacting case, we find that the scattering cross sections strongly depend on the momenta of the colliding quasi-particles and holes. Therefore, the relaxation towards equilibrium crucially depends on the spectrum of excitations. For example, for particle-hole excitations directly at the minimum of the (direct) Mott gap, the scattering cross sections vanish such that these excitations can have a very long life-time.

Downloads

Permalink: https://www.hzdr.de/publications/Publ-30187
Publ.-Id: 30187


The impact of mineralogy on processing for recovery of chromite and PGE in the Bushveld Complex, South Africa

Bachmann, K.; Chetty, D.; Tolosana Delgado, R.; Gutzmer, J.

The Lower and Middle Group (LG and MG) chromitites of the Bushveld Complex in South Africa are the source of a very large portion of the global chrome supply. The recovery of platinum group elements and base metals (Ni, Cu) as by-products has the potential to add value to these chrome resources. Yet, the effectiveness of chromite and platinum-group element beneficiation circuits is highly sensitive to variations in feed composition. Mineral assemblages have been noted to be affected by surficial weathering (down to 50 m) and hydrothermal alteration. Of particular relevance is the abundance of alteration silicates, the prevailing base metal sulphides (BMS) and platinum group mineral (PGM) assemblages and mineral association which have a significant impact on recoveries and concentrate grade. The goal of this particular case study was to evaluate the potential recoverability of platinum group elements (PGE) as a by-product during chromite production in the Thaba Mine. As shown by a lot of studies, only a very minor amount of the economically important 3E (Pt,Pd,Rh) is enclosed in chromite and will therefore report to the chromite concentrate. On the other hand, the 6E (Pt, Pd, Rh, Ru, Ir and Au) grades of the mined chromitites are usually below 2 g/t and the feasibility of an additional PGE processing plant will be challenging. Therefore, a versatile and flexible geometallurgical framework is needed to identify potential PGE targets within the mine and to predict the recoverability of PGE in the ore. To extract a maximum of information at a minimal cost and material use, the framework proposed iterates between analytical work and statistical/ mathematical modelling.
Here, we focus on the metallurgical test work results of unweathered LG and MG chromitites. More than 100 different diamond drill core intersections of chromitite seams were used as sample material and analyzed by automated scanning electron-based image analysis. Several properties of each sample were fed into a statistical unsupervised classification scheme to create seven mineralogically distinct clusters for a subsequent metallurgical test work at Mintek. Composited batch samples were milled and fed to a shaking table to separate the chromite as efficiently as possible. Tailings were milled to 80 % < 75 µm, sampled and fed to flotation cells. The tailings of the rougher circuit were discharged and the rougher concentrate was subsequently fed to a cleaner flotation stage. Finally, the cleaner concentrate was sampled and chemically analyzed. Batch sample results display rather homogeneous shaking table feed 3E grades, ranging from 0.43 to 0.69 ppm, while Cr2O3 concentrations display a larger variability, ranging from 35 wt% to 42 wt%. Flotation feed grades range from 0.75 to 1.96 ppm. Cleaner flotation concentrates display grades between ca. 4 ppm and 16 ppm, resulting in upgrading factors between 2 and 11. Overall 3E recovery is between 25 and above 40 %. One reason for these PGE losses could be either large and liberated PGM grains or BMS agglomerates associated with PGM and/or PGE, which would go with the chromite concentrate. To reduce losses at the chromite concentration stage a possible PGM removal upfront with coarse flotation should be considered. Secondly, creating flotation reagent regimes and increasing residence time of the ore in the flotation cells to handle complex PGM assemblages (PGE-alloys and –sulpharsenides) will increase the flotation performance. To further increase the recovery, new flotation technology for better mineral surface cleaning may promote flotation of liberated PGM, as well as increasing liberation (e.g. Mach reactor).

  • Lecture (Conference)
    Tagung Aufbereitung und Recycling, 07.-08.11.2019, Freiberg, Deutschland

Permalink: https://www.hzdr.de/publications/Publ-30186
Publ.-Id: 30186


Highly sensitive ²⁶Al measurements assisted by ILIAMS

Lachner, J.; Kern, M.; Marchhart, O.; Martschini, M.; Priller, A.; Steier, P.; Wallner, A.; Wieser, A.; Golser, R.

The higher ion source output from Al2O3 for AlO− compared to Al− can improve the sensitivity of 26Al AMS measurements. One obstacle is the more complicated isobar suppression after AlO− extraction: For the metallic Al anion the 26Mg background is suppressed in the ion scource. With ion-laser interaction mass spectrometry (ILIAMS), however, the 26Mg isobar can also be completely suppressed for extracted AlO− ions. This now allows the use of the more prolific AlO− beam at facilities with terminal voltages <10 MV.
At the 3MV Vienna Environmental Research Accelerator (VERA) routine ILIAMS assisted AMS measurements of 26Al are performed utilizing AlO− and charge states 2+ and 3+ on the high-energy (HE) side of the spectrometer. Tests of Al2O3 mixtures with different metals were conducted to achieve the optimal generation of AlO− currents.
Admixtures of Cu or Ag powder showed good results but were surpassed by mixing Al2O3 with Fe powder. In addition, results of first experiments will be presented regarding the utilization of ILIAMS assisted 26Al measurements with lower terminal voltages and using the 1+ charge state on the HE side.

Keywords: Accelerator Mass Spectrometry and Applications

Permalink: https://www.hzdr.de/publications/Publ-30185
Publ.-Id: 30185


From Ore to Metal - Advanced Materials Characterisation by Automated Mineralogy

Sandmann, D.; Bachmann, K.; Gutzmer, J.

‘Automated Mineralogy’ terms an analytical method that is based on a combination of scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS). We suggest to use the term ‘Automated Materials Characterisation’ instead in certain cases, since not only minerals but other solid substances can be characterised by this method. The range of solid natural and artificial materials that has been investigated includes minerals, ores, rocks, mineral beneficiation products and tailings, metals, alloys, slags, construction materials, ceramics, glasses as well as recycling and semiconductor materials and even extraterrestrial materials.
Automated mineralogical investigations provide the unique opportunity to place quantitative constraints on a multitude of parameters tangible for the development and critical evaluation of beneficiation test work. This includes modal mineralogy, calculated elemental content, elemental distributions, mineral associations, particle and mineral size distributions, particle density distributions as well as liberation [3]. Sample overview images (‘mineral maps’) and images of specific mineral groups can also be extracted from the analysis data.
Of particular value is Automated Mineralogy in the field of processing of mineral raw materials. Here, the analyses generate an improved material understanding and are used for evaluation and optimisation of mineral beneficiation processes. Application leads to the reduction of raw material losses coupled with an increased resource and energy efficiency, and thus higher revenue for the operation. Recent research has shown that automated mineralogy data can be used to establish particle-based grade-recovery curves for minerals and elements from feed compositions – and expand the assessment of process efficiencies to include particle distribution probabilities.
The value of Automated Mineralogy is widely recognized in the minerals industry. Yet, its application is most widespread in the characterization of noble (Au, PGE) and base metal (especially Cu, but also Ni) ores and processing streams. The two case studies presented here for Li and Co ores serve to illustrate the potential of Automated Mineralogy during the beneficiation of minor commodities (such as Li) and beneficiation products, including by-products (such as Co). Automated Mineralogy is found to be an analytical method suitable to provide robust quantitative mineralogical data on very complex raw materials; current research extends its application to the characterization of recycling materials. The method is already very well established and an essential part of most studies in the field of processing of primary raw materials, whereas in the case of recycling raw materials only a few sample studies indicate the potential of the method.

  • World of Mining 71(2019)5, 283-291
    ISSN: 1613-2408

Permalink: https://www.hzdr.de/publications/Publ-30184
Publ.-Id: 30184


An open source platform for predictive geometallurgy

Tolosana Delgado, R.; Schach, E.; Kupka, N.; Buchmann, M.; Bachmann, K.; Frenzel, M.; Pereira, L.; Rudolph, M.; van den Boogaart, K. G.

Geometallurgy (the science of predicting the behaviour of ores along the value chain on the basis of their geoscientific characteristics) has barely moved beyond process mineralogy studies. These studies typically describe the mineralogical and microstructural characteristics of pristine or processed ores, for qualitative or semi-quantitative assessment of the processing performance and, eventually, a trial-and-error optimisation of the operation. But to deliver on its promise, geometallurgy should progress beyond this to provide fully quantitative models of such primary ore characteristics and the performance of their processing, both in average value and, most importantly, keeping track of their uncertainty. Only then it will be possible to optimise the operation in a predictive way. For this goal, we have developed a data mining platform consisting on a SQL database, an R front-end in-house package, and back-ends interpreting data from several analytical instruments into the database. A structured relational SQL database is useful to organise all available information (geometry, phase, chemistry, physical properties) of mineral grains, particles and samples. The R front-end allows to use the statistical and data mining power of this open-source environment in a transparent way for any geomet task, from ore characterisation to process fitting and forecasting, from geostatistical prediction to operational optimisation.
With regard to the back-ends, currently we import XRD, XRF and mineral liberation analysis measurements, and we will incorporate other data sources. The scripting abilities of R allow to process many streams in loop freeing the user of repeating tedious click-and-drop tasks; compute virtually any quantity; distribute the work among several clusters; or keep a log file of the calculations done, for accountability. This contribution presents the building blocks of this package, and their use with several examples in geometallurgical tasks.

  • Contribution to proceedings
    IMPC 2020, 18.-22.10.2020, Cape Town, South Africa

Permalink: https://www.hzdr.de/publications/Publ-30183
Publ.-Id: 30183


A THz View on Magnetization Dynamics: Opportunities at the THz User Facility TELBE

Awari, N.; Wang, Z.; Deinert, J.-C.; Chen, M.; Green, B. W.; Germanskiy, S.; Ilyakov, I.; de Oliveira, T.; Bawatna, M.; Deac, A. M.; Bonetti, S.; Gensch, M.; Kovalev, S.

The control of magnetic order by intense THz radiation is an emerging area in today’s ultra-fast Science community. Many different studies have investigated the interaction between THz fields and magnetic order on sub-picosecond timescales and have demonstrated different mechanisms for THz control. In this contribution, we discuss the opportunities to control the magnetic order of the material using spectrally dense, high repetition rate, narrow band THz pulses at TELBE.

Related publications

  • Poster
    GRC Spin dynamics in nanostructures, 07.07.2019, Les delbrates, Switzerland

Permalink: https://www.hzdr.de/publications/Publ-30182
Publ.-Id: 30182


All-optical structuring of laser-driven proton beam profiles

Metzkes-Ng, J.; Bernert, C.; Brack, F.-E.; Branco, J.; Bussmann, M.; Cowan, T.; Curry, C. B.; Gaus, L.; Fiuza, F.; Garten, M.; Gauthier, M.; Glenzer, S. H.; Göde, S.; Hübl, A.; Irman, A.; Kim, J. B.; Kluge, T.; Kraft, S.; Kroll, F.; Macdonald, M. J.; Mishra, R.; Obst-Hübl, L.; Pausch, R.; Prencipe, I.; Rehwald, M.; Rödel, C.; Ruyer, C.; Schlenvoigt, H.-P.; Sommer, P.; Schoenwalder, C.; Schumaker, W.; Ziegler, T.; Schramm, U.; Zeil, K.

Extreme field gradients intrinsic to relativistic laser-interactions with thin solid targets enable compact multi-MeV proton accelerators. The initial µm-scale acceleration phase is followed by ballistic proton propagation with negligible space-charge effects over millimeters to hundreds of centimeters to a site of analysis/application. The detected proton distribution can be influenced by the spatio-temporal intensity distribution in the laser focus, electron transport, plasma instabilities, as well as target geometry and surface properties.
Substantially extending this picture, our recent results show a critical influence of the mm-scale vacuum environment on the accelerated proton bunch, where residual gas molecules are ionized by the remnant laser light not absorbed into the target plasma but reflected or transmitted. In an experiment with µm-sized hydrogen jet targets, this effect lead to the counter-intuitive observation of laser near-field feature imprints in the detected proton beam profiles. Our results show that the remnant laser pulse induces a quasi-static deflecting field in the ionized residual background gas that serves as a memorizing medium and allows for asynchronous information transfer to the naturally delayed proton bunch. Occurring under typical experimental laser, target and vacuum conditions, all-optical imprinting needs to be taken into account for sensible interpretation of modulated proton beam profiles.

Keywords: laser-driven ion acceleration

  • Invited lecture (Conferences)
    European Advanced Accelerator Concepts Workshop (EAAC 2019), 15.-21.09.2019, La Biodola, Isola d'Elba, Italien

Permalink: https://www.hzdr.de/publications/Publ-30181
Publ.-Id: 30181


A THz View on Magnetization Dynamics: Opportunities at the THz User Facility TELBE

Awari, N.; Wang, Z.; Deinert, J.-C.; Chen, M.; Green, B. W.; Germanskiy, S.; Ilyakov, I.; de Oliveira, T.; Bawatna, M.; Deac, A. M.; Bonetti, S.; Gensch, M.; Kovalev, S.

The control of magnetic order by intense THz radiation is an emerging area in today’s ultra-fast Science community. Many different studies have investigated the interaction between THz fields and magnetic order on sub-picosecond timescales and have demonstrated different mechanisms for THz control. In this contribution, we discuss the opportunities to control the magnetic order of the material using spectrally dense, high repetition rate, narrow band THz pulses at TELBE. The THz facility at ELBE (TELBE) is one of only a few superradiant THz light sources operated at an SRF accelerator and the only facility worldwide that provides: high THz fields at quasi-CW repetition rates. TELBE is operated in early-stage user operation since 08/2016.

Related publications

  • Poster
    IRMMW 2019, 01.-06.09.2019, Paris, France

Permalink: https://www.hzdr.de/publications/Publ-30180
Publ.-Id: 30180


Narrow band tunable spintronic THz emission from ferrimagnetic nano-films

Awari, N.; Ilaykov, I.; Fowley, C.; Rode, K.; Lau, Y.-C.; Betto, D.; Thiyagarajah, N.; Green, B. W.; Yildrim, O.; Lindner, J.; Faßbender, J.; Coey, M.; Deac, A. M.; Gensch, M.; Kovalev, S.

We report on narrow band THz emission from ferrimagnetic Mn3-xGa nano-films based. The emission originates from coherently excited spin precession. The central frequency of the emitted radiation is determined by the anisotropy field, while the bandwidth relates to Gilbert damping. It is shown how THz emission can be used for the characterization dynamical properties of ultra-thin magnetic films. We furthermore discuss the potential of these types of films as efficient on-chip spintronic THz emitter.
Keywords: Spintronics, THz emitter, nano-films.

  • Invited lecture (Conferences)
    International Conference on Optics and Electro-Optics 2019, 19.-22.10.2019, Dehradun, India

Permalink: https://www.hzdr.de/publications/Publ-30179
Publ.-Id: 30179


Active Modes and Dynamical Balances in MRI Turbulence of Keplerian Disks with a Net Vertical Magnetic Field

Gogichaishvili, D.; Mamatsashvili, G.; Horton, W.; Chagelishvili, G.

We studied dynamical balances in magnetorotational instability (MRI) turbulence with a net vertical field in the shearing box model of disks. Analyzing the turbulence dynamics in Fourier (k-)space, we identified three types of active modes that define the turbulence characteristics. These modes have lengths similar to the box size, i.e., lie in the small wavenumber region in Fourier space labeled "the vital area" and are (i) the channel mode, uniform in the disk plane with the smallest vertical wavenumber; (ii) the zonal flow mode, azimuthally and vertically uniform with the smallest radial wavenumber; and (iii) the rest (parasitic) modes. The rest modes comprise those harmonics in the vital area whose energies reach more than 50% of the maximum spectral energy. The rest modes individually are not so significant compared to the channel and zonal flow modes; however, the combined action of their multitude is dominant over these two modes. These three mode types are governed by the interplay of the linear and nonlinear processes, leading to their interdependent dynamics. The linear processes consist of disk flow nonmodality modified classical MRI with a net vertical field. The main nonlinear process is the transfer of modes over wavevector angles in Fourier space—the transverse cascade. The channel mode exhibits episodic bursts supplied by linear MRI growth, while the nonlinear processes mostly oppose this, draining the channel energy and redistributing it to the rest modes. As for the zonal flow, it does not have a linear source and is fed by nonlinear interactions of the rest modes.

Keywords: accretion,; dynamo; instabilities; magnetohydrodynamics (MHD); turbulence; accretion disks

Downloads

Permalink: https://www.hzdr.de/publications/Publ-30178
Publ.-Id: 30178


Ionenstrahlen erzeugen periodische, magnetische Domänenstrukturen

Nord, M.; Mcgrouther, D.; Potzger, K.; Bali, R.

Bei der Ausbildung magnetischer Domänen in Nanostrukturen spielt die magnetische Anisotropie eine wesentliche Rolle. Sie kann durch die äußere Form der magnetischen Struktur, aber auch durch Verzerrungen im Kristallgitter beeinflusst werden. In einem Material, dessen magnetische Eigenschaften durch Ionenbestrahlung verändert werden, lassen sich beide Beiträge gleichzeitig erzeugen. Dieses Phänomen hat unsere Gruppe am Helmholtz-Zentrum Dresden-Rossendorf ausgenutzt, um Domänenstrukturen gezielt einzustellen.

Keywords: Magnetismus; Ionenbestrahlung; FeAl

Related publications

  • Physik in unserer Zeit 51(2020)2, 58-59

Permalink: https://www.hzdr.de/publications/Publ-30177
Publ.-Id: 30177


Ultrasmall silicon nanoparticles as promising platform for multimodal imaging

Singh, G.; Ddungu, L. Z. J.; Licciardello, N.; Bergmann, R.; de Cola, L.; Stephan, H.

Ultrasmall renal clearable nanoparticles possess enormous potential as cancer imaging agents [1, 2]. In this perspective, biocompatible silicon nanoparticles (Si NPs) are highly attractive. Their facile surface functionalization allows the introduction of different labels for in vivo imaging. Recently, we have reported on biodistribution of ultrasmall silicon particles (size ~ 4 nm) in small animals by in vivo positron emission tomography (PET) to provide reliable information about absorption, distribution, metabolism, and excretion (ADME) [3].
Subsequent functionalization of Si NPs with a near-infrared dye (IR800-CW) and a radiolabel (64Cu) enabled a detailed in vitro and in vivo study of the particles of these dual labeled particles. Both PET and fluorescence imaging studies showed a rapid renal clearance from small animals. It has been proven that ultrasmall Si NPs with a surface charge close to zero show fast distribution kinetics and rapid renal clearance. Despite the very small size, multiple and different functionalities can be grafted on the nanoparticle surface. In this way, the pharmacokinetic properties can be tailored and the behavior can be studied in vitro and in vivo in detail.

[1] Zarschler et al. Nanomedicine: Nanotechnology, Biology, and Medicine. 2016, 12: 1663-1701.
[2] Kunz-Schughart et al. Biomaterials 2017, 120: 155-184.

  • Lecture (others)
    Faraday Discussion: Luminescent silicon nanostructures, 12.-14.02.2020, York, UK

Permalink: https://www.hzdr.de/publications/Publ-30176
Publ.-Id: 30176


Multifunctional Stealth Nanoparticles for Biomedical Applications

Stephan, H.

Due to their size and surface charge, nanoparticles are often recognised as foreign objects by the body's own immune system and eliminated by its scavenger cells. A special role is played by the opsonisation of the particles, i.e. the surface is coated with special proteins (protein corona) in order to be more easily recognised and absorbed by phagocytic cells. Basically, there are two strategies to avoid phagocytosis. Firstly, the formation of a protein corona on nanoparticles is dramatically reduced by ultrasmall particles (< 5 nm) [1-2] and secondly, there is the possibility of producing so-called "stealth" particles that are invisible to the immune system. Here, the application of a zwitterionic protective coating (see Figure) is frequently used, which minimizes or prevents the surface binding of proteins [3-7].
This lecture will focus on the development and characterization of tiny nanoparticles, embracing silicon quantum dots, superparamagnetic iron oxide and upconverting nanophosphors for biomedical applications.
[1] L. Boselli, E. Polo, V. Castagnola, K. A. Dawson, Angew. Chem. Int. Ed. 56 (2017) 4215-4218.
[2] N. Liccardello, S. Hunoldt, R. Bergmann, G. Singh, C. Mamat, A. Faramus, J. L. Z. Ddungu, S. Silvestrini, M, Maggini, L. De Cola, H. Stephan, Nanoscale 10 (2018) 9880-9891.
[3] K. Pombo-García, K. Zarschler, L. Barbaro, J. A. Barreto, W. O’ Malley, L. Spiccia, H. Stephan, B. Graham, Small 10 (2014) 2516-2529.
[4] K. Pombo-García, S. Weiss, K. Zarschler, C.-S. Ang, R. Hübner, J. Pufe, S. Meister, J. Seidel, J. Pietzsch, L. Spiccia, H. Stephan, B.Graham, ChemNanoMat 2 (2016) 959-971.
[5] K. Pombo-García, C. L. Rühl, R. Lam, J. A. Barreto, C.-S. Ang, P. J. Scammels, P. Comba, L. Spiccia, B. Graham, T. Joshi, H. Stephan, ChemPlusChem 82 (2017) 638-646.
[6] A. Nsubuga, M. Sgarzi, K. Zarschler, M. Kubeil, R. Hübner, R. Steudtner, B. Graham, T. Joshi, H. Stephan, Dalton Trans. 47 (2018) 8595-8604.
[7] A. Nsubuga, K. Zarschler, M. Sgarzi, B. Graham, H. Stephan, T. Joshi, Angew. Chem. Int. Ed. 57 (2018) 16036-16040.

  • Invited lecture (Conferences)
    3nd International Conference on Translational Chemistry, 02.-05.12.2019, Lissabon-Caparica, Portugal

Permalink: https://www.hzdr.de/publications/Publ-30175
Publ.-Id: 30175


Applications of ASL in glioma imaging

Petr, J.

  • Invited lecture (Conferences)
    Glioma MR imaging 2.0 Action meeting, 12.-13.12.2019, Malta, Malta

Permalink: https://www.hzdr.de/publications/Publ-30174
Publ.-Id: 30174


A theranostic drug for prostate cancer CAR T cell immunotherapy and PET imaging

Arndt, C.; Koristka, S.; Berndt, N.; Bergmann, R.; Loureiro, L. R.; Kotzerke, J.; Bachmann, M.; Feldmann, A.

Although chimeric antigen receptor (CAR) T cells have demonstrated outstanding therapeutic efficacy, current design of clinically approved CAR constructs renders therapies monospecific, inflexible and imperiled to severe side effects. We therefore refined the CAR approach and established a switchable platform technology termed UniCAR. Instead of directly interacting with tumor cells, UniCAR‐engrafted T cells recognize the short peptide epitope E5B9. Their on/off switch is mediated by E5B9‐comprising targeting modules (TMs), facilitating indirect cross‐linkage to antigen‐expressing cancer cells.

As all TMs described to date contain an antibody‐derived binding moiety, we aimed to develop a ligand‐based low‐molecular weight agent that enables not only UniCAR T cell retargeting, but also monitoring of the therapeutic response by non‐invasive PET imaging.

For proof of concept of this novel theranostic approach, we successfully converted the clinically approved radiotracer PSMA‐11 into a TM by fusion with E5B9 without affecting its diagnostic properties in mice and humans. Moreover, the chemically synthesized, ligand‐based compound efficiently mediated PSMA‐expressing tumor cell lysis by UniCAR T cells both in vitro and in vivo.

Taken together, the PSMA‐ligand TM represents a novel theranostic agent that is an attractive candidate for immunotherapy of prostate cancer as well as for initial diagnosis and follow‐up treatment.

  • Abstract in refereed journal
    Human Gene Therapy 30(2019)12, ICLEa19‐0024
    DOI: 10.1089/hum.2019.29091.abstracts
  • Poster
    International Conference on Lymphocyte Engineering (ICLE 2019), 13.-15.09.2019, London, United Kingdom

Permalink: https://www.hzdr.de/publications/Publ-30172
Publ.-Id: 30172


Redirection of UniCAR T cell against EGFR+ tumor cells by using different αEGFR targeting module formats

Jureczek, J.; Feldmann, A.; Albert, S.; Bergmann, R.; Berndt, N.; Arndt, C.; Koristka, S.; Bachmann, M.

Since epithelial growth factor receptor (EGFR) mutations or overexpression is linked with variety of malignancies, including lung, breast, stomach, colorectal, head and neck carcinomas as well as glioblastomas, it is an attractive target for tailored treatment. As chimeric antigen receptor (CAR) engineered T cells highly effectively eliminate hematological malignancies already in the clinics, one idea is to redirect CAR T cells also against EGFR expressing solid cancers. However, CAR T cell therapy can lead to severe, even life‐threatening side effects with high risk of on‐target/off‐tumor activity. To overcome these challenges our UniCAR technology might be an appropriate answer combining high anti‐tumor effectiveness, tumor specificity, flexibility, and safety control mechanisms. In contrast to conventional CARs, UniCAR T cells are per se inert because UniCARs are directed against a small peptide epitope, which is not present on living cells. The redirection of UniCAR T cells toward target cells occurs only in the presence of a tumor specific targeting molecule (TM) – bifunctional moieties carrying the specificity for a certain tumor antigen and contain the UniCAR peptide epitope recognized by UniCARs. TMs can be made of different molecules showing various structures. Here we are presenting the comparison in functionality, in vitro and in vivo, of two TM formats: nanobody based αEGFR TM derived from the camelid αEGFR antibody 7C12 and scFv derived TM from the clinically used chimeric monoclonal antibody Cetuximab (IMC C‐225). In principle, we observed that both TM formats are able to redirect UniCAR T cells to eliminate EGFR‐expressing tumor cells in an antigen‐specific and TM‐dependent manner. Most interestingly, the tumor killing efficiency of the αEGFR scFv TM was significantly superior in comparison to the nanobody based TM, what might decide whether UniCAR T cells attack target cells showing different EGFR density level.

  • Abstract in refereed journal
    Human Gene Therapy 30(2019)12, ICLEa19‐0036
    DOI: 10.1089/hum.2019.29091.abstracts
  • Poster
    International Conference on Lymphocyte Engineering (ICLE 2019), 13.-15.09.2019, London, United Kingdom

Permalink: https://www.hzdr.de/publications/Publ-30171
Publ.-Id: 30171


UniCAR T-cells retargeted via short-lived and extended half-life target modules - a combined approach for cancer immunotherapy

Loureiro, L. R.; Feldmann, A.; Bergmann, R.; Berndt, N.; Hoffmann, A.; Mitwasi, N.; Jureczek, J.; Koristka, S.; Bachmann, M.; Arndt, C.

Chimeric antigen receptors (CARs) are highly efficient tools for T‐cell‐based cancer immunotherapy. Nonetheless, this approach is associated with mild to severe toxicities including cytokine release syndrome and on‐target/off‐tumor effects. To increase clinical safety while maintaining the efficacy of CAR T‐cell therapy, we developed a novel modular universal CAR (UniCAR) platform. UniCAR T‐cells are exclusively activated via a target module (TM) that establishes the cross‐link between UniCAR T‐cells and cancer cells. Given the small size of such molecules, they are rapidly eliminated and thus, have to be administrated via continuous infusion. Consequently, activation and possible side effects of UniCAR T‐cells can be easily controlled by TM dosing. Regulation of CAR T‐cell activity is mainly important during onset of therapy when tumor burden and the risk for severe side effects are high. Therefore, TMs with extended half‐life may improve eradication of residual tumor cells in late phase of treatment and further expedite clinical application. In this line of thought, we developed both short‐lived and longer lasting TMs directed against several tumor‐associated antigens. Short‐lived TMs are composed of a tumor‐specific binding moiety and the E5B9 peptide epitope which is recognized by UniCAR T‐cells. In order to generate extended half‐life TMs, these two components are fused to the human IgG4 Fc domain. Both short‐lived and longer lasting TMs efficiently redirect UniCAR T‐cells to cancer cells in a highly target‐specific manner, thereby promoting the secretion of pro‐inflammatory cytokines and tumor cell lysis in vitro and in vivo. As demonstrated by PET‐imaging, all TMs specifically enriched at the tumor site presenting either short or prolonged serum half‐lives. Taken together, combination of different short‐lived and extended half‐life TMs provides a highly promising and customized tool for retargeting of UniCAR T‐cells in a flexible, individualized and safe manner at different phases of tumor therapy.

  • Abstract in refereed journal
    Human Gene Therapy (2019)
  • Lecture (Conference)
    International Conference on Lymphocyte Engineering (ICLE 2019), 13.-15.09.2019, London, United Kingdom

Downloads

  • Secondary publication expected

Permalink: https://www.hzdr.de/publications/Publ-30170
Publ.-Id: 30170


Combinatorial tumor targeting using a novel switchable RevCAR system

Feldmann, A.; Hoffmann, A.; Bergmann, R.; Loureiro, L. R.; Kittel-Boselli, E.; Mitwasi, N.; Koristka, S.; Jureczek, J.; Berndt, N.; Arndt, C.; Bachmann, M.

Background
Although T-cells genetically modified to express chimeric antigen receptors (CARs) are successfully used to treat hematological malignancies, patients still suffer from several drawbacks of conventional CAR (cCAR) therapy. CAR-T-cells can cause severe to life-threatening adverse reactions like on-target, off-tumor toxicities which cannot be controlled in patients. Moreover, cCAR therapy often fails to successfully affect solid tumors and bears the risk to encourage tumor escape variants upon targeting of only one single tumor-associated antigen (TAA). In order to overcome these problems, we have established a novel on/off-switchable RevCAR system facilitating combinatorial targeting strategies.
Methods
For combinatorial targeting one T-cell has to be modified with two separate CARs recognizing different TAAs. The first CAR mediates the activation and the second CAR the costimulatory signal. In case of ‘AND’ gate targeting, dual-CAR-T-cells have to recognize both TAAs on the surface of the target cells to get activated. However, such combinatorial targeting strategies are struggling with several challenges including the adjustment of signal strength and affinity of both split CARs as well as the CAR size limiting the number of transduced specificities. In order to overcome these obstacles, our idea was to construct small RevCARs comprising only a small peptide epitope as extracellular domain. By removing the extracellular single-chain variable fragment (scFv) of cCARs, RevCARs avoid tonic signaling induced by scFv dimerization. As RevCARs do not have an extracellular antigen binding moiety, they cannot bind to any antigen per se. Thus, actually they are switched off. Only in the presence of a bispecific target module (RevTM), RevCAR-T-cells can be redirected to tumor cells and switched on. Finally, short-living RevTMs allow a repeatedly on/off-switch and controllability of RevCAR-T-cells and furthermore a flexible redirection of RevCAR-T-cells to any target.
Results
For proof of concept two small peptide epitopes were selected to construct the respective RevCARs. Additionally, a series of different RevTMs was generated recognizing one of the two peptide epitopes and simultaneously any potential TAA. RevTMs were able to efficiently redirect RevCAR-T-cells specifically against different tumor targets. Moreover, we show that combinatorial targeting can be achieved using our RevCAR system. Here, dual-RevCAR-T-cells were efficiently activated only after engagement by two RevTMs targeting the activating or costimulatory RevCAR and different TAAs.
Conclusions
Taken together, we developed a switchable RevCAR platform showing high effectiveness, increased specificity, improved safety, easy controllability, and small size facilitating combinatorial tumor targeting.

  • Open Access Logo Abstract in refereed journal
    Journal for ImmunoTherapy of Cancer 7(2019)Suppl. 1, P174
    DOI: 10.1186/s40425-019-0763-1
    Cited 16 times in Scopus
  • Poster
    34th Annual Meeting of the Society for Immunotherapy of Cancer (SITC 2019), 06.-10.11.2019, National Harbor, Maryland, USA

Permalink: https://www.hzdr.de/publications/Publ-30169
Publ.-Id: 30169


40Ar/39Ar Geochronology of ICDP PALEOVAN Drilling Cores

Engelhardt, J.

The scientific drilling campaign PALEOVAN was conducted in the summer of 2010 and was part of the international continental drilling programme (ICDP). The main goal of the campaign was the recovery of a sensitive climate archive in the East of Anatolia. Lacustrine deposits underneath the lake floor of ‘Lake Van’ constitute this archive. The drilled core material was recovered from two locations: the Ahlat Ridge and the Northern Basin. A composite core was constructed from cored material of seven parallel boreholes at the Ahlat Ridge and covers an almost complete lacustrine history of Lake Van. The composite record offered sensitive climate proxies such as variations of total organic carbon, K/Ca ratios, or a relative abundance of arboreal pollen. These proxies revealed patterns that are similar to climate proxy variations from Greenland ice cores. Climate variations in Greenland ice cores have been dated by modelling the timing of orbital forces to affect the climate. Volatiles from melted ice aliquots are often taken as high-resolution proxies and provide a base for fitting the according temporal models. Colleagues from the PALEOVAN scientific team fitted proxy data from Lake Van to the ice core data and constructed an age model that based on the fitting. Embedded volcaniclastic layers had to be dated radiometrically in order to provide independent age constraints to this climate-stratigraphic age model. Solving this task by an application of the 40Ar/39Ar method was the main objective of this thesis. Earlier efforts to apply the 40Ar/39Ar dating resulted in inaccuracies that could not be explained satisfactorily. Two stratovolcanos are located at the western and the northern shore of Lake Van: Nemrut and Süphan. Both volcanoes have deposited volcaniclastic materials into the lake’s basin throughout the entire lacustrine history of Lake Van. Feldspars and volcanic glasses from rhyolitic and trachytic tephra were analysed for their chemical composition in order to evaluate their suitability as target materials for the 40Ar/39Ar method. The absence of K-rich feldspars in suitable tephra layers implied that crystals needed to be 500 micrometer in size minimum, in order to apply single-crystal 40Ar/39Ar dating. Some of the samples did not contain any of these grain sizes or only very few crystals of that size. In order to overcome this problem this study applied a combined single-crystal and multi-crystal approach with different crystal fractions from the same sample. The preferred method of a stepwise heating analysis of an aliqoute of feldspar crystals has been applied to three samples. The Na-rich crystals and their young geological age required 20 mg of inclusion-free, non-corroded feldspars. Small sample volumes (usually 25 % aliquots of 5 cm3 of sample material – a spoon full of tephra) and the widespread presence of melt-inclusion led to the application of combined single- and multigrain total fusion analyses. 40Ar/39Ar analyses on single crystals have the advantage of being able to monitor the presence of excess 40Ar and detrital or xenocrystic contamination in the samples. Multigrain analyses may hide the effects from these obstacles. The results from the multigrain analyses are therefore discussed with respect to the findings from the respective cogenetic single crystal ages. Some of the samples in this study were dated by 40Ar/39Ar on feldspars on multigrain separates and (if available) in combination with only a few single crystals. 40Ar/39Ar ages from two of the samples deviated statistically from the age model. All other samples resulted in identical ages. The deviations displayed older ages than those obtained from the age model. t-Tests compared radiometric ages with available age control points from various proxies and from the relative paleointensity of the earth magnetic field within a stratigraphic range of 10 m. Concordant age control points from different relative chronometers indicated that deviations are a result of erroneous 40Ar/39Ar ages. The thesis argues two potential reasons for these ages: (1) the irregular appearance of 40Ar from rare melt- and fluid- inclusions and (2) the contamination of the samples with older crystals due to a rapid combination of assimilation and ejection. The contamination with older crystals by detrital processes cannot be excluded due to the analysis of multigrain fractions. However, this process appears unlikely because apparent ages are normally distributed. Another aliquot of feldspar crystals that underwent separation for the application of 40Ar/39Ar dating was investigated for geochemical inhomogeneities. Magmatic zoning is ubiquitous in the volcaniclastic feldspar crystals. Four different types of magmatic zoning were detected. The zoning types are compositional zoning (C-type zoning), pseudo-oscillatory zoning of trace element concentrations (PO-type zoning), chaotic and patchy zoning of major and trace element concentrations (R-type zoning) and concentric zoning of trace elements (CC-type zoning). Samples that deviated in 40Ar/39Ar ages showed C-type zoning, R-type zoning or a mix of different types of zoning (C-type and PO-type). Feldspars showing PO-type zoning typically represent the smallest grain size fractions in the samples. The constant major element compositions of these crystals are interpreted to represent the latest stages in the compositional evolution of feldspars in a peralkaline melt. PO-type crystals contain less melt- inclusions than other zoning types and are rarely corroded. This thesis concludes that feldspars that show PO-type zoning are most promising chronometers for the 40Ar/39Ar method, if samples provide mixed zoning types of Quarternary anorthoclase feldspars. Five samples were dated by applying the 40Ar/39Ar method to volcanic glass. High fractions of atmospheric Ar (typically > 98%) significantly hampered the precision of the 40Ar/39Ar ages and resulted in rough age estimates that widely overlap the age model. Ar isotopes indicated that the glasses bore a chorine-rich Ar-end member. The chlorine-derived 38Ar indicated chlorine-rich fluid-inclusions or the hydration of the volcanic glass shards. This indication strengthened the evidence that irregularly distributed melt-inclusions and thus irregular distributed excess 40Ar influenced the problematic feldspar 40Ar/39Ar ages. Whether a connection between a corrected initial 40Ar/36Ar ratio from glasses to the 40Ar/36Ar ratios from pore waters exists remains unclear. This thesis offers another age model, which is similarly based on the interpolation of the temporal tie points from geophysical and climate-stratigraphic data. The model used a PCHIPinterpolation (piecewise cubic hermite interpolating polynomial) whereas the older age model used a spline-interpolation. Samples that match in ages from 40Ar/39Ar dating of feldspars with the earlier published age model were additionally assigned with an age from the PCHIPinterpolation. These modelled ages allowed a recalculation of the Alder Creek sanidine mineral standard. The climate-stratigraphic calibration of an 40Ar/39Ar mineral standard proved that the age versus depth interpolations from PAELOVAN drilling cores were accurate, and that the applied chronometers recorded the temporal evolution of Lake Van synchronously. Petrochemical discrimination of the sampled volcaniclastic material is also given in this thesis. 41 from 57 sampled volcaniclastic layers indicate Nemrut as their provenance. Criteria that served for the provenance assignment are provided and reviewed critically. Detailed correlations of selected PALEOVAN volcaniclastics to onshore samples that were described in detail by earlier studies are also discussed. The sampled volcaniclastics dominantly have a thickness of < 40 cm and have been ejected by small to medium sized eruptions. Onshore deposits from these types of eruptions are potentially eroded due to predominant strong winds on Nemrut and Süphan slopes. An exact correlation with the data presented here is therefore equivocal or not possible at all. Deviating feldspar 40Ar/39Ar ages can possibly also be explained by inherited 40Ar from feldspar xenocrysts contaminating the samples. In order to test this hypothesis diffusion couples of Ba were investigated in compositionally zoned feldspar crystals. The diffusive behaviour of Ba in feldspar is known, and gradients in the changing concentrations allowed for the calculation of the duration of the crystal’s magmatic development since the formation of the zoning interface. Durations were compared with degassing scenarios that model the Ar loss during assimilation and subsequent ejection of the xenocrystals. Diffusive equilibration of the contrasting Ba concentrations is assumed to generate maximum durations as the gradient could have been developed in several growth and heating stages. The modelling does not show any indication of an involvement of inherited 40Ar in any of the deviating samples. However, the analytical set-up represents the lower limit of the required spatial resolution. Therefore, it cannot be excluded that the degassing modelling relies on a significant overestimation of the maximum duration of the magmatic history. Nevertheless, the modelling of xenocrystal degassing evidences that the irregular incorporation of excess 40Ar by melt- and fluid inclusions represents the most critical problem that needs to be overcome in dating volcaniclastic feldspars from the PALEOVAN drill cores.
This thesis provides the complete background in generating and presenting 40Ar/39Ar ages that are compared to age data from a climate-stratigraphic model. Deviations are identified statistically and then discussed in order to find explanations from the age model and/or from 40Ar/39Ar geochronology. Most of the PALEOVAN stratigraphy provides several chronometers that have been proven for their synchronicity. Lacustrine deposits from Lake Van represent a key archive for reconstructing climate evolution in the eastern Mediterranean and in the Near East. The PALEOVAN record offers a climate-stratigraphic age model with a remarkable accuracy and resolution.

Keywords: Ar/Ar Geochronology; Volcaniclastics; Lake Van; ICDP PALEOVAN; Age Model; Drill Cores; Feldspar; Volcanic Glass

Permalink: https://www.hzdr.de/publications/Publ-30168
Publ.-Id: 30168


Short-lived and extended half-life target modules for redirecting UniCAR T-cells against sialyl-Tn expressing cancer cells

Loureiro, L. R.; Feldmann, A.; Bergmann, R.; Koristka, S.; Berndt, N.; Hegedus, N.; Mathe, D.; Videira, P.; Bachmann, M.; Arndt, C.

Background
The development of chimeric antigen receptors (CARs) has rapidly emerged as a promising approach in cancer immunotherapy. Nonetheless, drawbacks associated with CAR T cell therapies include on-target/off-tumor effects and cytokine release syndrome. Aiming an increased clinical safety while preserving the efficacy of such therapy, we developed a novel modular universal CAR platform termed UniCAR. UniCAR T-cells are exclusively activated in the presence of a target module (TM), which establishes the cross-link between antigen-specific cancer cells and UniCAR T-cells in an individualized time- and target-dependent manner. The carbohydrate antigen sialyl-Tn (STn) is a particularly interesting target due to its expression in several types of cancer and absence in normal healthy tissues. Given the small size of such TMs, they are rapidly eliminated and thus, possible side effects and activation of UniCAR T-cells can be easily controlled by TM dosing. In late phases of treatment, TMs with extended half-life may play an important role by improving the eradication of residual tumor cells.
Methods
In this work, a novel longer-lasting TM against STn was developed, characterized and compared to the previously developed short-lived anti-STn TM. Short-lived TMs are composed of a tumor-specific binding moiety fused to the La peptide epitope (E5B9) which is recognized by UniCAR T-cells. In extended half-life TMs, these two components are fused via an Fc domain derived from the human IgG4 molecule. Functional and pharmacokinetic properties were assessed using in vitro and in vivo assays.
Results
The developed anti-STn IgG4-based TM efficiently activates and redirects UniCAR T-cells to STn-expressing tumors in a highly efficient target-specific and target-dependent manner, promoting the secretion of pro-inflammatory cytokines, tumor cell lysis of breast and bladder cancer cells in vitro and of breast cancer cells in experimental mice. A comparable or increased killing efficiency was obtained at a lower concentration range in comparison to the results obtained for the anti-STn scFv-based TM. Additionally, PET studies demonstrate the specific enrichment of the anti-STn IgG4-based TM at the tumor site presenting a prolonged serum half-life compared to the scFv short-lived TM.
Conclusions
Taken together, these data demonstrate the effective and potential application of this CAR T cell-derived modular system to target STn in different types of cancer using different TM formats. The use and combination of such molecules with different formats and half-lives provides highly promising and customized tools for retargeting of UniCAR T-cells in a flexible, individualized and safe manner at different stages of treatment.

  • Open Access Logo Abstract in refereed journal
    Journal for ImmunoTherapy of Cancer 7(2019)
  • Poster
    34th Annual Meeting of the Society for Immunotherapy of Cancer (SITC 2019), 06.-10.11.2019, National Harbor, Maryland, USA

Permalink: https://www.hzdr.de/publications/Publ-30167
Publ.-Id: 30167


Targeting the FMS-like Tyrosin Kinase 3 with the Unicar System: Preclinical Comparison of Murine and Humanized Single-Chain Variable Fragment-Based Targeting Modules

Fasslrinner, F.; Arndt, C.; Feldmann, A.; Koristka, S.; Loureiro, L. R.; Schmitz, M.; Jung, G.; Bornhaeuser, M.; Bachmann, M.

Clinical translation of chimeric antigen receptor (CAR) T cell therapy in myeloid malignancies is progressing slowly compared to its success in treatment of B cell malignancies. Clinical experiences with CAR T cell therapies against the currently investigated tumor-associated antigens (TAA) (e.g. CD33, CD123 and FMS-like tyrosine kinase 3 (FLT3)) were discouraging and severe side effects occurred (cytokine release syndrome, neurotoxicity and myeloid aplasia) (Hoffmann et al. Journal of Clinical Medicine 2019). Probably targeting a single TAA is insufficient to treat high risk myeloid malignancies with CAR T cell therapies. Therefore, combined targeting of two or even more TAAs seems to be a promising approach. In order to implement such a multiple tumor targeting strategy, we developed a modular CAR T cell system termed UniCAR. The system consists of a universal CAR (UniCAR) directed against the La peptide epitope E5B9 combined with single-chain variable fragment (scFv) -based target modules (TM). In contrast to conventional CARs, anti-tumor activity of UniCAR T cells is only turned on in the presence of the TMs. Thus, this approach will allow UniCAR T cell control due to the short half-life of the TM and therefore has a favorable safety profile. Furthermore, different TMs against several TAAs can be administered both sequentially or in parallel to increase the anti-tumor efficacy or face disease relapse due to antigen escape mechanisms. In the field of myeloid malignancies our group developed retargeting strategies against the TAAs CD33 and CD123 (Cartellieri et al. Blood Cancer Journal 2016). In addition, we have developed a new TM for the UniCAR system that is directed against the TAA FLT3. FLT3 is highly expressed on acute myeloid leukemia (AML) cells and also present on CD123low AML samples (Riccioni et al. British Journal of Haematology 2011).

The novel FLT3 TM was constructed by fusion of the variable domain of the heavy and the light chain of the murine anti-FLT3 monoclonal antibody (4G8) to the E5B9 UniCAR epitope. In light of a potential clinical application, we in parallel generated a humanized FLT3 TM to further decrease its immunogenicity. Both FLT3 TMs were tested in vitro against different AML cell lines, by using flow cytometry based killing assays as described elsewhere (Fasslrinner et al. British Journal of Haematology 2019). The functionality of the FLT3 TMs in vitro was highly effective. Both FLT3 TMs were able to redirect UniCAR T cells for AML cell lysis already in the picomolar range and were moreover comparable effective than the previously developed CD123 TM. Thus, humanization of the FLT3 TM did not lead to a decrease in anti-tumor efficacy.

In summary, we could show that both the novel murine FLT3 TM and the humanized counterpart redirected UniCAR T cells and induced highly effective elimination of AML cells in vitro. Thus, the flexible application of the FLT3-based UniCAR system seems to be a promising tool for cell-based AML therapy alone or even in combination with other AML-specific TMs (e.g. CD33, CD123).

Downloads

  • Secondary publication expected

Permalink: https://www.hzdr.de/publications/Publ-30166
Publ.-Id: 30166


A Novel Revcar Platform for Switchable and Gated Tumor Targeting

Feldmann, A.; Hoffmann, A.; Kittel-Boselli, E.; Bergmann, R.; Koristka, S.; Berndt, N.; Arndt, C.; Loureiro, L. R.; Mitwasi, N.; Jureczek, J.; Bornhaeuser, M.; Bachmann, M.

Hematological malignancies are successfully treated with chimeric antigen receptor (CAR) armed T cells. Despite the clinical success, CAR T cell therapy struggles still with some problems including the selection of tumor escape variants and on-target, off-tumor side reactions as well as massive cytokine release and uncontrollability of CAR T cell activity in the patients. In order to enable controllability of CAR T cells and to avoid unspecific side effects, we established a novel switchable, split and adaptable CAR platform technology, termed RevCAR system.

The novel RevCARs lack the single chain variable fragment (scFv) commonly used as extracellular domain in conventional CARs. Instead of the scFv, RevCARs contain only a small peptide epitope as extracellular portion. This design reduces the CAR size, avoids unspecific antigen binding and prevents antigen independent tonic signaling caused by scFv dimerization. As RevCAR T cells do not recognize anything, they are per se inert. Only in the presence of a corresponding bispecific antibody based target module (RevTM) they can be specifically redirected to tumor cells. Therefor RevTMs consist of two scFvs. One recognizes the RevCAR peptide epitope and the other one simultaneously binds to a tumor associated antigen (TAA). By dosing of the RevTM, which has a very short half-life, the reactivity of RevCAR T cells can be switched on and off reversibly. Another advantage is that the RevCAR system can be flexibly adapted to any tumor antigen simply by exchanging the RevTM. Furthermore, the small RevCAR size is favorable for inserting more than one RevCAR in the same T cell thus facilitating the mode of gated targeting which is a highly attractive approach to minimize the risk for on-target, off-tumor toxicities against healthy tissues and to increase tumor specificity of conventional CAR T cells. For 'AND' gate targeting via the RevCAR system, two different RevCARs were constructed and expressed simultaneously in the same T cell. The two RevCARs differed with respect to the extracellular peptide epitope and the intracellular signaling domain. Moreover, the respective transmembrane domain was selected to isolate the respective RevCAR signal. The first RevCAR is designed to transmit the activation signal, the second RevCAR to deliver a costimulatory signal. For efficient RevCAR T cell activation, both RevCARs must be engaged via their respective RevTM which on the one hand binds to one of the two RevCAR epitopes and on the other hand to one of two TAAs expressed on the same target cell. Here, we present two RevCAR/RevTM systems for retargeting of AML cells as well as solid tumor cells including via gated targeting.

In summary, we show proof of concept for a novel switchable RevCAR system that can be used for retargeting of AML cells as well as solid tumors. The novel modular RevCAR platform is characterized by small size, lacks unwanted tonic signaling effects, allows the control of RevCAR T cell activity, enables gated targeting strategies, and can be adapted to any tumor antigen and tumor type.

Downloads

  • Secondary publication expected

Permalink: https://www.hzdr.de/publications/Publ-30165
Publ.-Id: 30165


TU Bergakademie Freiberg beteiligt sich an der Fachkräfteinitiative GlasCampus Torgau

Rudolf, S.; Engelhardt, J.; Kilo, M.; Grigoleit, J.

In Zusammenarbeit mit dem Landkreis Nordsachsen, dem Beruflichen Schulzentrum Torgau sowie Unternehmen und Verbänden beteiligt sich die TU Bergakademie Freiberg am GlasCampus Torgau. Ziel der gemeinsamen Initiative sind die Gewinnung und Qualifizierung von Fachkräften sowie die Förderung des Fachkräftenachwuchses für die mitteldeutsche Glas-, Keramik- und Baustoffwirtschaft. Daneben soll die Innovationskraft der Unternehmen durch die Förderung des Wissens- und Technologietransfers sowie kooperativer Forschungs- und Entwicklungsaktivitäten gestärkt werden.

Keywords: GlasCampus Torgau; Fachkräfte; Wissenstransfer; Technologietransfer

  • Contribution to external collection
    Gerhard Roewer, Peter Seidelmann, Birgit Seidel-Bachmann, Helmuth Albrecht, Ulrich Groß: ACAMONTA Zeitschrift für Freunde und Förderer der TU Bergakademie Freiberg, Freiberg: Freunde und Förderer der TU Bergakademie Freiberg, 2019

Permalink: https://www.hzdr.de/publications/Publ-30164
Publ.-Id: 30164


Development of Target Modules for Early and Late Stage Cancer Treatment Using Switchable Unicar T Cell Therapy

Loureiro, L. R.; Feldmann, A.; Bergmann, R.; Berndt, N.; Koristka, S.; Mitwasi, N.; Hoffmann, A.; Jureczek, J.; Bornhaeuser, M.; Bachmann, M.; Arndt, C.

The clinical efficacy of CAR T cell therapies has been widely recognized, particularly in the treatment of hematologic malignancies. Nevertheless, CAR T cells also have the capability to elicit undesired effects such as on-target/off-tumor recognition and cytokine release syndrome. To increase clinical safety of CAR T cell therapy, a novel modular universal CAR platform termed UniCAR was developed by our group. In the UniCAR system, antigen-binding specificity and signaling features are two distinct moieties, in which the antigen specificity is provided by targeting modules (TMs) to redirect UniCAR T cells in an individualized time- and target-dependent manner. In this way, UniCAR T-cells acquire killing potential only in the presence of a tumour-specific TM. Given the reduced size of such molecules, they are rapidly eliminated and therefore, need to be continuously infused. Thus, possible side effects and activation of UniCAR T cells can be easily monitored and controlled by TM dosing. During the onset of therapy, tumor burden and the risk for severe side effects are high and regulation of CAR T cell activity is particularly important at this stage. For this reason, TMs with extended half-life may play an important role by improving eradication of residual tumor cells in late phases of treatment and further expedite clinical application. In this line of thought, a set of novel short-lived and longer-lasting TMs directed against several tumor-associated antigens was developed. Short-lived TMs are composed of a tumor-specific binding moiety fused to the La peptide epitope (E5B9) which is recognized by UniCAR T cells. In order to generate extended half-life TMs, these two components are fused via an Fc domain derived from the human IgG4 molecule. In vitro and in vivo assays have shown that both short-lived and longer-lasting TMs efficiently redirect UniCAR T cells to cancer cells in a highly target-specific manner, thereby promoting the secretion of pro-inflammatory cytokines and tumor cell lysis. Further assays using PET-imaging, demonstrated that all TM formats specifically enriched at the tumor site presenting either short or prolonged serum half-lives. From a clinical point of view, after the initial reduction of tumor burden promoted by the small TMs, IgG4-based TMs could be subsequently administrated allowing a more convenient and personalized treatment of the patients avoiding the continuous infusion of the short-lived TMs. Furthermore, the specific accumulation of such IgG4-based TMs at the tumor site sets these molecules as attractive candidates for in vivo imaging and endoradiotherapy. Taken together, combination of switchable UniCAR T cells and TMs with different sizes, specificities and half-lives represent a flexible and individualized approach at different stages of cancer treatment.

Downloads

  • Secondary publication expected

Permalink: https://www.hzdr.de/publications/Publ-30163
Publ.-Id: 30163


The use of pure oxygen for aeration in aerobic wastewater treatment: a review of its potential and limitations

Skouteris, G.; Rodriguez Garcia, G.; Reinecke, S.; Hampel, U.

In aerobic wastewater treatment, aeration is the most critical element of the treatment system. It supplies microorganisms with the required amount of dissolved oxygen, maintains solids in suspension and controls membrane fouling, where needed. However, conventional activated sludge, where air is used, is limited to low-strength wastewaters as higher loadings or more intense feeds require both higher biomass and dissolved oxygen concentrations. In membrane bioreactors, despite being able to operate at higher biomass concentrations, their operation at high biomass concentrations and high organic loadings has not been tested. By replacing air with pure oxygen, oxygen transfer rates increase at lower flowrates. In this work, the potential and limitations of pure oxygen systems over conventional ones are reviewed. Also, the effect of the operational parameters or the mixed liquor characteristics on oxygen transfer is determined. Pure oxygen affects bacterial structure, controls foam formation, improves bacterial enzymatic activity and, in membrane bioreactors, leads to a better recovery of permeability after cleanings. It treats much higher loadings without compromising final effluent quality. Fine bubbles are more efficient in oxygen transfer due to their increased contact area. Nevertheless, pure oxygen aeration at times is not essential or it may generate effluent organic matter of a higher refractory character. We then recommend that it be used to applications where conventional aeration is not adequate.

Keywords: aerobic treatment; activated sludge; membrane bioreactor; pure oxygen; fine bubbles

Downloads

Permalink: https://www.hzdr.de/publications/Publ-30162
Publ.-Id: 30162


Development of Novel Anti-CD10 Target Modules for Redirection of Universal CAR T Cells Against CD10-Positive Malignancies

Feldmann, A.; Koristka, S.; Arndt, C.; Loureiro, L. R.; Bergmann, R.; Berndt, N.; Hoffmann, A.; Jureczek, J.; Mitwasi, N.; Bornhaeuser, M.; Hořejší, V.; Bachmann, M.

The common acute lymphoblastic leukemia antigen CD10 is a marker for several hematological malignancies, including acute lymphoblastic leukemia as well as T and B cell lymphomas, Burkitt lymphomas, and some solid tumors like renal cell carcinomas, pancreatic tumors and melanomas. Because of its tumor related expression pattern, CD10 is an attractive target for adoptively transferred T cells that are genetically modified to express chimeric antigen receptors (CARs). Recently, conventional CAR T cell therapy targeting CD19-positive hematological malignancies was clinically approved because of its impressive effectiveness in patients. However, CAR T cells can also cause severe side effects like on-target, off-tumor reactions, tumor lysis syndrome and cytokine release syndrome. Most critically, activity of conventional CAR T cells cannot be controlled, once they are applied in patients. As CD10 is also widely expressed on normal tissues, CAR T cell reactivity has to be controllable in order to stop CAR T cell therapy in case of on-target, off-tumor toxicities occur. Especially for this purpose, we have recently established a switchable, modular and universal CAR platform technology, named UniCAR system, which can be repeatedly turned on and off. In contrast to conventional CARs, that directly recognize a tumor-associated antigen (TAA) on the tumor cell surface via their extracellular single-chain variable fragment (scFv), the UniCAR system is structured in a modular manner of two components. The first component are T cells genetically engineered to express UniCARs and the second component are target modules (TMs). Most importantly, UniCARs cannot directly bind to a TAA because their extracellular scFv is directed against the peptide epitope E5B9 which is not present on the surface of living cells. Consequently, UniCAR armed T cells are per se inert. They can be redirected towards tumor cells only via a TM. TMs consist of a scFv targeting a TAA and the epitope E5B9 recognized by UniCARs allowing a cross-linkage of UniCAR T cells with tumor cells which results in T cell activation. As TMs have a very short half-life, UniCAR T cell activity can be controlled by dosing of the TM. Once the TM is administered, UniCAR T cells can be switched on, but once the TM injection is stopped and the TM is eliminated, UniCAR T cells are switched off immediately. Here, we show proof of concept for functionality of the UniCAR system targeting CD10-positive malignancies. Therefor, a novel anti-CD10 TM was constructed which is able to redirect UniCAR T cells to eliminate CD10-expressing tumor cells. In summary, we have established a universal, switchable, modular UniCAR platform technology that can be used to target CD10-positive malignancies.

Downloads

  • Secondary publication expected

Permalink: https://www.hzdr.de/publications/Publ-30161
Publ.-Id: 30161


Self-assembled surface nanopatterns for magnetic anisotropy engineering

Erb, D.; Schlage, K.; Tretiakov, O.; Lenz, K.; Lindner, J.; Röhlsberger, R.; Facsko, S.

The focus of this presentation will be nanopatterning by different self-assembly mechanisms and how it can be applied for influencing the magnetic properties, mainly magnetic shape anisotropy, of materials.
We would like to show that well-established macroscopic material processing techniques – broad-beam ion irradiation, high-temperature annealing, and physical vapor deposition – can be used to fabricate nanopatterned materials in a bottom-up fashion and to give them tuneable magnetic properties.

Related publications

  • Lecture (others)
    IOM Kolloquium, 25.04.2019, Leipzig, Deutschland

Permalink: https://www.hzdr.de/publications/Publ-30160
Publ.-Id: 30160


Demonstration of a Broadband Photodetector Based on a Two-Dimensional Metal- Organic Framework

Arora, H.; Dong, R.; Venanzi, T.; Zscharschuch, J.; Schneider, H.; Helm, M.; Feng, X.; Cánovas, E.; Erbe, A.

Metal-organic frameworks (MOFs) are emerging as an appealing class of highly tailorable electrically-conducting materials with potential applications in opto-electronics. Yet, the realization of their proof-of-concept devices remains a daunting challenge, attributed to their poor electrical properties. Following our recent report on a semiconducting Fe3(THT)2(NH4)3 (THT, 2,3,6,7,10,11-triphenylenehexathiol) two-dimensional MOF with record-high mobility and band-like charge transport, here, we demonstrate Fe3(THT)2(NH4)3 MOF-based photodetector operating in photoconductive mode capable of detecting a broad wavelength excitation of charge carriers. The narrow IR bandgap of the active layer (~0.45 eV) constrains the performance of the photodetector at room temperature by band-to-band thermal. At 77 K, the device performance is significantly improved; two orders of magnitude higher voltage responsivity, lower noise equivalent power, and higher specific detectivity of 7×108 cm Hz1/2 W–1 are achieved under 785 nm excitation. These figures of merit are retained over the analyzed spectral region (400–1575 nm) and are commensurate to those obtained with the first demonstrations of graphene and black phosphorus based photodetectors. This work demonstrates the feasibility of integrating conjugated MOFs as an active element into broadband photodetectors, thus bridging the gap between materials’ synthesis and technological applications.

Keywords: metal-organic frameworks; broadband photodetectors; low-temperature photodetection; two-dimensional semiconductors; photosensitivity

Related publications

Permalink: https://www.hzdr.de/publications/Publ-30159
Publ.-Id: 30159


Effect of melt stirring during casting on the extrusion and mechanical properties of wrought aluminium alloys

Räbiger, D.; Willers, B.; Eckert, S.

The adjustment of fine grain morphologies has been approved to be a crucial issue for improving characteristics and properties of cast and wrought aluminium alloys. Several methods are known to achieve grain refinement in solidification processes: add-on of grain refiners, rapid cooling conditions, mechanical or electromagnetic stirring or ultrasonic treatment.
AC magnetic fields provide a contactless method to control the flow inside a liquid metal and the grain size of the solidified ingot. Many studies have shown that beneficial effects like a distinct grain refinement or the promotion of a transition from a columnar to an equiaxed dendritic growth (CET) can be obtained. However, electromagnetically-driven melt convection may also produce segregation freckles on the macroscale. The achievement of superior casting structures needs a well-aimed control of melt convection during solidification.
Previous investigations considered the use of time-modulated AC magnetic fields to control the heat and mass transfer at the solidification front. It has been shown recently under laboratory conditions that an accurate tuning of the magnetic field parameters can avoid segregation effects and homogenize the mechanical properties.
This present study examines the directional solidification of commercial wrought aluminium alloys EN AW 6082 from a water-cooled copper chill. Rotating time-modulated magnetic fields were used to agitate the melt. The impact of flow on the resulting macro and micro structure are investigated. The solidified structure was reviewed in comparison to an unaffected solidified ingot and ingot prepared with chemical grain refiner Ti3B. In addition results from extrusion process experiments and the achieved mechanical properties are introduced. Our results demonstrate the potential of time–modulated magnetic fields to control the grain size and to open the possibility to reduce the amount of grain refiner and to reduce the press capacity.

Keywords: wrought aluminium alloys; mechanical properties; electromagnetic stirring; forced convection

  • Lecture (Conference)
    LightMAT 2019 - 3rd International Conference on Light Materials – Science and Technology, 05.-07.11.2019, Manchester, United Kingdom

Permalink: https://www.hzdr.de/publications/Publ-30158
Publ.-Id: 30158


TEM observation of loops decorating dislocations and resulting source hardening of neutron-irradiated Fe-Cr alloys

Bergner, F.; Hernandez-Mayoral, M.; Heintze, C.; Konstantinovic, M. J.; Malerba, L.; Pareige, C.

Several open issues remain concerning the quantitative understanding of irradiation hardening in high-Cr steels. One of these issues is addressed here by correlating yield points that are observed in stress-strain curves with dislocation decoration observed by TEM for neutron-irradiated Fe-Cr alloys. It is found that both higher neutron exposure and higher Cr content promote irradiation-induced loops to arrange preferentially along dislocation lines. Consequently, the activation of dislocation sources requires unlocking from the decorating loops, thus resulting in a yield drop. This process is considered within the source hardening model as opposed to the dispersed barrier hardening model, the latter aimed to describe dislocation slip through a random array of obstacles. Microstructure-informed estimates of the unlocking stress are compared with measured values of the upper yield stress. As functions of neutron exposure, a cross-over from the dominance of dispersed-barrier hardening accompanied by smooth elastic-plastic transitions to the dominance of source hardening accompanied by yield drops is observed for Fe-9% Cr and Fe-12% Cr.

Keywords: iron-chromium alloy; neutron irradiation; hardening; tensile test; dislocation loop; TEM

Permalink: https://www.hzdr.de/publications/Publ-30157
Publ.-Id: 30157


Electron Population Dynamics in Optically Pumped Asymmetric Coupled Ge/SiGe Quantum Wells: Experiments and Models

Ciano, C.; Virgilio, M.; Bagolini, L.; Baldassarre, L.; Rossetti, A.; Pashkin, O.; Helm, M.; Montanari, M.; Persichetti, L.; Di Gaspare, L.; Capellini, G.; Paul, D. J.; Scalari, G.; Faist, J.; de Seta, M.; Ortolani, M.

n-type doped Ge quantum wells with SiGe barriers represent a promising heterostructure system for the development of radiation emitters in the terahertz range such as electrically pumped quantum cascade lasers and optically pumped quantum fountain lasers. The non-polar lattice of Ge and SiGe provides electron-phonon scattering rates that are one order of magnitude lower than polar GaAs. We have developed a self-consistent numerical energy-balance model based on a rate equation approach which includes inelastic and elastic inter- and intra-subband scattering events and takes into account a realistic 2DEG distribution in all the subband states of the Ge/SiGe quantum wells by considering subband-dependent electronic temperatures and chemical potentials. This full-subband model is here compared to the standard discrete-energy-level model, in which the material parameters are limited to few input values (scattering rates and radiative cross-sections). To provide an experimental case study, we have epitaxially grown samples consisting of two asymmetric coupled quantum wells forming a three-level system, which we optically pump with a free electron laser. The benchmark quantity selected for model testing purposes is the saturation intensity at the 1-3 intersubband transition. The numerical quantum model prediction is in reasonable agreement with the experiments and therefore outperforms the discrete-energy-level analytical model, whose prediction of the saturation intensity is off by a factor 3.

Keywords: quantum wells; intersubband transitions; terahertz quantum cascade laser; electron-phonon interaction; optical pumping; free electron laser; silicon-germanium heterostructures; infrared spectroscopy; intersubband photoluminescence

Related publications

Permalink: https://www.hzdr.de/publications/Publ-30156
Publ.-Id: 30156


Liquid Metal Batteries

Weber, N.; Personnettaz, P.; Weier, T.

Liquid metal batteries (LMBs) are fascinating electrochemical cells. Built as a stable density stratification of two liquid metals separated by a molten salt electrolyte, such cells offer cheap stationary energy storage and a long life time. Due to the totally liquid interior of the cells, fluid flow is of paramount importance for the safe operation of LMBs. As highly resistive electrolyte needs to be as thin as possible, a strong fluid flow might easily wipe it away and short circuit the cell. Aside from that, a slight flow might be highly beneficial. When discharing a Li-Bi LMB, Li will cross the electrolyte layer and alloy into Bi. As this process is diffusion-controlled, a Li-rich layer will build up on top of the positive electrode. A mild flow might equalize the alloy, thus reducing concentration polarization and improving the cell's efficiency.

The talk will first explain the set-up and operation of liquid metal batteries. Afterwards, different possible flow mechanisms in LMBs will be presented and discussed. These will include thermally driven Rayleigh-Benard convection, solutal convection, pinch effects, interface instabilities, the Tayler instability and electro-vortex flow. Besides of flow simulation, the modelling of the electric potential distribution, the current density and magnetic fields will be presented. Special attention will be paied to the implementation of the solvers in OpenFOAM, as well as the description of specialized discretisation schemes, which are necessary e.g. for computing the current density. Finally, it will be shown how different flows in the battery effect the cell voltage, and the integrity of the three layers.

  • Lecture (Conference)
    15th OpenFOAM Workshop, 23.06.2020, Arlington, USA

Permalink: https://www.hzdr.de/publications/Publ-30155
Publ.-Id: 30155


Ionisation chamber readings for proton beams in magnetic fields require dose correction factors

Gebauer, B.; Hoffmann, A. L.; Lühr, A.

Objectives: Proton therapy (PT) reduces the integral dose in healthy tissue compared to X-ray therapy (XT). At the same time PT is more sensitive to anatomical changes and organ motion than XT, making MRI guidance especially relevant for PT. Recently, we have integrated for the first time a 0.22 T in-beam MRI scanner with a proton therapy research beamline. As a next step, absolute and relative dosimetry in the presence of magnetic fields of the MRI scanner has to be established. This work investigates the influence of the static magnetic (B0) field of the MRI scanner on ionisation chamber (IC) readings for proton beams and the feasibility to correct the readings for the B0 field.

Materials & methods: Either a Semiflex 0.3 or a PinPoint3D IC was positioned in an MR-compatible water phantom to measure the absolute dose at five proton energies (70, 110, 150, 190, 226.7 MeV) in the entrance plateau area of the Bragg curve for a 10 x 10 cm2 pencil beam scanned irradiation field. The entrance window of the phantom was placed at the imaging isocentre of the MRI scanner. Dose measurements were repeated at the same position and under the same conditions without the B0 field. The IC signal was corrected to standard environmental conditions and for the beam quality.

Results & Conclusion: Systematic energy-dependent differences between dose readings with and without the B0 field were observed. For the Semiflex 0.3, the measured dose in the presence of the B0 field increased by 0.75%, 0.58%, 0.59% and 0.41% for 70 MeV, 110 MeV, 150 MeV and 190 MeV, respectively, and decreased by 0.36% for 226.7 MeV. For the same energies, the dose measured by the PinPoint3D increased by 0.81%, 0.69%, 0.63%, 0.47% and 0.31%. For all energies, the standard deviations were smaller than 0.10% and 0.19% for the Semiflex 0.3 and PinPoint3D IC, respectively.
Beam energy-dependent correction of IC readings is mandatory and appears feasible for accurate proton beam dosimetry in magnetic fields.

Keywords: dosimetry; MRgPT; correction factor; magnetic field

  • Lecture (Conference) (Online presentation)
    eDGMP 2020, 09.-11.09.2020, Leipzig, Deutschland

Permalink: https://www.hzdr.de/publications/Publ-30154
Publ.-Id: 30154


Inverse gas chromatography studies of the esterification of glass particles with different morphologies

Sygusch, J.; Rudolph, M.

The separation of fine particles is a challenging task where a proper understanding of the interfacial properties is crucial. In our research, we focus on flotation, which is a powerful and widely used separation technique, where valuable mineral particles are selectively separated from unwanted gangue, with particles in the size range of about 10 µm to 200 µm. For this process, particle properties such as wettability, size or morphology are fundamental separation features.
Although, it is a well-established processing technique that is used all over the world in industry, there are still some challenges with regard to the processing of ultrafine particles with sizes below 10 µm. The aim of this project, which is part of the German research foundation priority programme DFG-SPP 2045 “MehrDimPart”, is to gain a deeper understanding of the microprocesses that occur during flotation and to have a closer look on the influence of particle properties, like wettability and morphology.
For this research glass particles are used as their surface chemistry can be modified in different ways. Here, the functionalisation was carried out by esterification with alcohols, where the wettability of the product can be controlled by the length of the alkyl chain. In order to investigate the effect of particle morphology on flotation three differently shaped glass particles were used and esterified, including fibres, spheres and fragments with differing shapes. Inverse gas chromatography is used to characterise the particles surface energy distributions, which provide information about the particles wettability as well as the heterogeneity of the surface.

Keywords: Ultrafine Particles; Surface Modification; Esterification of Glass Particles; Hydrophobisation; Surface Energy Distribution; Inverse Gas Chromatography; Flotation

  • Lecture (Conference)
    8th International IGC Symposium, 04.06.2019, Köln, Deutschland

Permalink: https://www.hzdr.de/publications/Publ-30153
Publ.-Id: 30153


The effect of morphology of microparticles hydrophobized via esterification with alcohols on the specific surface energies distributions

Sygusch, J.; Rudolph, M.

Froth flotation is a well-established and efficient particle processing technique especially for the selective separation of mineral particles from unwanted material within sizes ranging from 10 µm to 200 µm. However, there are still some challenges and unexplored opportunities when it comes to the separation of ultrafine particles (< 10 µm). Within the German research foundation priority programme DFG-SPP 2045 “MehrDimPart” we aim to develop a novel multidimensional separation device for such ultrafine particles based on the particle parameters of wettability, morphology (shape or roughness) and size.
One important aspect of our investigations in this new flotation device lies in the modification of the materials surface, which is achieved via esterification with alcohols. To study the effect of the particle morphology/shape on the hydrophobization of glass microparticles, three differently shaped but same sieve sized fractions are used for applying esterification, among them spherical particles, elongated particles and particle fragments with varying shapes. The characterisation of the particle wettability is realised using the inverse gas chromatography method with additional information on the surface energy components distributions. The wettability is varied using alcohols with different chain length and the resulting surface energy components distributions are put in context with flotabilities of the particles in two flotability characterisation set-ups, i.e. tube microflotation and particle adhesion to hydrocarbons.

Keywords: Ultrafine Particles; Surface Modification; Esterification of Silica; Hydrophobisation; Surface Energy Distribution; inverse Gas Chromatography; Flotation

  • Poster
    PARTEC 2019 - International Congress on Particle Technology, 09.-11.04.2019, Nürnberg, Deutschland

Permalink: https://www.hzdr.de/publications/Publ-30152
Publ.-Id: 30152


Solution-Phase Synthesis of the Fluorogenic TGase 2 Acyl Donor Z-Glu(HMC)-Gly-OH and its Use for Inhibitor and Amine Substrate Characterisation

Wodtke, R.; Pietsch, M.; Löser, R.

A reliable solution-phase synthesis of the water-soluble dipeptidic fluorogenic transglutaminase substrate Z-Glu(HMC)-Gly-OH is presented. The route started from Z-Glu-OH, which was converted into the corresponding cyclic anhydride. This building block was transformed into the regioisomeric - and -dipeptides. Key step was the esterification of Z-Glu-Gly-OtBu with 4-methylumbelliferone. The final substrate compound was obtained in an acceptable yield and excellent purity without the need of purification by RP-HPLC. The advantage of this acyl donor substrate for the kinetic characterisation of inhibitors and amine-type acyl acceptor substrates is demonstrated by evaluating commercially available or literature-known irreversible inhibitors and the biogenic amines serotonin, histamine and dopamine, respectively.

Keywords: fluorogenic enzyme substrates; side-chain esterified peptides; aryl esters; peptide synthesis; enzyme kinetics; biogenic amines

Downloads

Permalink: https://www.hzdr.de/publications/Publ-30151
Publ.-Id: 30151


Simulation of coolant mixing in a BWR spent fuel storage pool and flood chamber

Höhne, T.

The waiting times in case of failure of the cooling system of the spent fuel storage pool were determined with the three-dimensional numerical calculation tool ANSYS CFX. With the calculated variant, it is assumed that the swivel gate is opened when required. For the decay heat of 1.5 MW, waiting times until the spent fuel storage pool has been heated to 60 °C or 80 °C were calculated and the temperature offset between the spent fuel storage pool and the storage chamber pool was determined.

The calculations showed that the coolant from the flood chamber and the storage chamber, which is located above the lower edge of the open swivel gate, mixes ideally with the water from the spent fuel pool. The results of the CFD analysis can be used for the cross-code verification of models in integral codes.

Keywords: Boiling; CFD; Mixing; spent fuel storage pool

Downloads

  • Secondary publication expected

Permalink: https://www.hzdr.de/publications/Publ-30150
Publ.-Id: 30150


Helium Ion Microscope Imaging and Time-of-Flight Secondary Ion Mass Spectrometry depth profiling of sample cross sections

Klingner, N.; Heller, R.; Hlawacek, G.

The Helium ion microscope is well known for its high-resolution imaging and nanofabrication performance. We have recently developed and presented a time-of-flight based secondary ion mass spectrometer that can be retrofitted to existing microscopes [1, 2].

Depth profiling in SIMS in general is usually done by sputtering into deeper layers and plotting the signal intensity over time. The actual milling depth can only be estimated and the common approach is to measure the crater depth with atomic force microscopy every time a compositional change is observed.

Direct imaging and chemical analysis of a cross-section with high spatial resolution can avoid this challenge. The cross sections will be prepared ex-situ by milling, grinding and low energy argon ion polishing.

[1] Klingner, N.; Heller, R.; Hlawacek, G.; von Borany, J.; Notte, J. A.; Huang, J. and
Facsko, S.; Ultramicroscopy 162(2016), 91-97
[2] Klingner, N.; Heller, R.; Hlawacek, G.; Facsko, S. and von Borany, J.; Ultramicroscopy 198(2019), 10-17

Related publications

  • Lecture (Conference)
    PicoFIB - Advances in Gas-Ion Microscopy, 20.01.2020, Sheffield, United Kingdom

Permalink: https://www.hzdr.de/publications/Publ-30149
Publ.-Id: 30149


Numerical simulation of adiabatic two phase flow in horizontal elbow bends

Abdlgwad, A.

In industry there is need for predicting the morphology of two-phase liquid-gas flows that are part of e.g. distillation processes, pipeline transport units, chemical reactors or heat transfer units. Knowledge of the behavior of the flow and its regime facilitate for the engineers to have proper design of downstream processes and the pipeline in order to achieve the best reliable and economic outcome. One topic that is not studied sufficiently is the characterization of not fully developed flow due originated from insufficient developing or calming length as it can be found downstream of elbow bends and in short straight pipes, which are frequently encountered in industrial applications. In order to study this topic and characterize the flows, an experimental instrumentation was set up using Wire-mesh Sensors. This work is a numerical work using ANSYS CFX 19.1 in order to set up simulations of the experimentally investigated pipe geometries and flow regimes, followed by validation with the WMS data. Therefore, this work is concerned with gas-liquid flow in a horizontal straight pipe of DN50 and DN200 and horizontal elbow bends with the same diameters and curvature ratio of R/D=1. Each of the geometries is studied for annular and stratified wavy flow.

  • Master thesis
    Grenoble INP, 2019
    Mentor: Alexander Döß
    36 Seiten

Permalink: https://www.hzdr.de/publications/Publ-30148
Publ.-Id: 30148


Charakterisierung von Zweiphasenströmungen in komplexen Rohrgeometrien

Junge, P.

Die vorliegende Arbeit beschäftigt sich mit der Charakterisierung einer Zweiphasenströmung durch eine komplexe Rohrgeometrie in Form eines horizontalen 90°-Rohrbogens mit einem Innendurchmesser D = 50mm und einem relativen Radius R=1 . Basierend auf experi-mentellen Gittersensordaten wird der Bereich stromauf- und stromabwärts der Bogengeometrie untersucht. Die experimentellen Untersuchungen erfolgten an einer horizontalen, nicht vollständig eingelaufenen Zweiphasenströmung. Schwerpunkt der Untersuchungen war da-bei die Beurteilung des Einflusses der Rohrleitungslänge. Ein bleibender Einfluss des Rohrbogens auf die Strömungsmorphologie konnte nicht festgestellt werden. Für die Bestimmung des Gasanteils und des Zweiphasendruckverlustes wurden existierende Modellansätze systematisiert und bezüglich der Anwendung auf nicht eingelaufende Zweiphasenströmungen, bzw. den Bereich des Rohrbogens überprüft. Basierend auf der Abweichung der Korrelationen wurden kombinierte Berechnungsansätze für den Gasanteil und den Zweiphasendruck-verlust ausgewählt, welche die experimentellen Daten mit bester Näherung korrelierten.

  • Diploma thesis
    TU Dresden, 2019
    Mentor: Alexander Döß
    107 Seiten

Permalink: https://www.hzdr.de/publications/Publ-30147
Publ.-Id: 30147


Towards the clinical translation of the adenosine A2A receptor (A2AR) radioligand [18F]FLUDA: preclinical perspectives

Teodoro, R.; Lai, T. H.; Toussaint, M.; Gündel, D.; Dukic-Stefanovic, S.; Deuther-Conrad, W.; Kranz, M.; Schröder, S.; Moldovan, R.-P.; Brust, P.

Introduction
The A2AR has emerged as a potential therapeutic target due to its involvement in basic functions of the neuronal, cardiovascular and immune systems. Blockade of A2AR is regarded as potential tool related to CAR T-cell immunotherapy of cancer. Furthermore, A2AR are believed to regulate myocardial oxygen demand and to increase coronary circulation by vasodilation. With regard to Parkinson’s disease A2AR antagonists, such as the FDA approved Nourianz®, are used as an adjunctive treatment to levopoda®. Therefore noninvasive imaging to monitor changes of receptor density and/or occupancy during the A2aR-tailored therapy is of utmost importance. We recently developed the A2AR PET radiotracer [18F]FLUDA which demonstrated superior pharmacokinetic properties among the radiotracers available. Towards its clinical translation, an automated radiosynthesis was developed and the radiotracer was fully characterized in vitro and in vivo including toxicity and dosimetry1 studies.
Methods
The binding affinity (Ki) of FLUDA towards the human A2AR and A1R subtypes was estimated in vitro by competitive radioligand binding assays. In addition, selectivity studies were performed. An automated two-step one-pot radiosynthesis of [18F]FLUDA was developed. In vitro autoradiography was performed on cryosections of mice brain. Dynamic PET/MR studies under baseline and blocking conditions were assessed. The time-activity curves of the SUV ratio (SUVR) of striatum over cerebellum were used as measure for specific uptake. Metabolism was investigated in CD-1 mice via radio-HPLC analysis of extracted plasma and brain samples. Single-dose acute toxicity of FLUDA was assessed in male and female Wistar rats.
Results
A high A2aR binding affinity and high A1R selectivity were recorded for FLUDA (KiA2aR= 0.60 nM and KiA1R= XX nM). The two-step one-pot automated radiosynthesis of [18F]FLUDA was successfully established (radiochemical yield: 9±1%; radiochemical purity: ≥98%; molar activity= 69 333 GBq/µmol). In vitro autoradiography with [18F]FLUDA revealed a specific accumulation in the striatum, which is characterized by the binding parameters KD = 4.3 ± 0.7 nM and Bmax = 556 ± 143 fmol/mg wet weight (Fig.1A). In vivo evaluation in mice revealed that only the parent radiotracer was found in plasma and brain samples at 15 min p.i.. PET scans (n=3) showed a selective binding of [18F]FLUDA in striatum (SUVR15 30 min p.i.>8), which was significantly reduced by pre-treatment with 2.5 mg/kg i.p. tozadenant (30%, n=3, p<0.05, Fig.1B/C). The single dose toxicity study of FLUDA did not reveal any adverse effects for ~ 1000-fold of expected human dose.
Conclusion
The fully automated radiosynthesis of [18F]FLUDA allows its translation to clinical radiopharmacy. [18F]FLUDA exhibited a A2AR-specific accumulation in the striatum in vitro and in vivo. No safety concerns are expected upon administration of [18F]FLUDA according to toxicity and dosimetry studies. Altogether, these results encourage the performance of clinical trials to validate the potential of [18F]FLUDA for imaging of neuronal, cardiovascular and cancer-related diseases.
Acknowledgments
The authors thank the European Regional Development Fund and Sächsische Aufbaubank (SAB) for financial support (project no. 100226753).
[1] Kranz, M. et al. (2020) this volume.

Keywords: adenosine A2A receptor; [18F]FLUDA; PET; clinical translation

  • Open Access Logo Contribution to proceedings
    Society of Nuclear Medicine and Molecular Imaging Meeting (SNMMI 2020), 13.-16.06.2020, New Orleans, USA
    The Journal of Nuclear Medicine, USA: Society of Nuclear Medicine and Molecular Imaging, S267

Downloads

Permalink: https://www.hzdr.de/publications/Publ-30146
Publ.-Id: 30146


Process Metallurgy in Circular Economy System Design: The Copper and Base Metal Value Chain

Abadias Llamas, A.; Valero, A.; Bartie, N. J.; Stelter, M.; Reuter, M.

Evaluating the economic viability as well as the sustainability of the Circular Economy (CE) system requires a deep understanding of the distribution of all elements, compounds, alloys, materials etc. in flows. In this paper, the circularity of the copper value chain, including primary and secondary processing, is rigorously evaluated. The studied system comprises the metallic copper production from primary sources (from mineral to metal), copper-containing commodity production (copper is mixed with other metals) and copper recycling through secondary smelting to close the loop. This is linked to photovoltaic (PV) panels and battery storage. A simulation model of this system is created using HSC Sim, considering more than 30 elements (and its various compounds), 180 unit operations and 800 flows. From the mass and energy balances obtained through the simulation, an exergy analysis is conducted to evaluate the resource consumption from a second law (entropy) perspective. Additionally, these results are complemented through a Life Cycle Assessment (LCA), the recovery of technology elements and by-products is discussed, while quantifying the losses through the value chain. Through the digitalization of the complete system, a better CAPEX and OPEX understanding of the metal recovery and losses can be obtained, as well as the associated resource consumption and environmental impacts. New flowsheets and technologies can be evaluated. Several scenarios show how the resource consumption and the environmental impacts are affected by the recovery of different materials to produce different products.

Keywords: Copper Value Chain; Exergy; Life Cycle Assessment; Process Simulation; Sustainability Evaluation

  • Lecture (Conference)
    10th Copper International Conference, COPPER 2019 / Conference of Metallurgists, COM 2019, 18.-21.08.2019, Vancouver, Canada

Permalink: https://www.hzdr.de/publications/Publ-30145
Publ.-Id: 30145


Maxwell solver in PIC simulations

Bussmann, M.; Steiniger, K.

Keywords: pseudo-spectral time domain; particle-in-cell; finite difference

  • Invited lecture (Conferences)
    CASUS Miniworkshop on Numerics, 13.-14.11.2019, Dresden, Deutschland

Permalink: https://www.hzdr.de/publications/Publ-30144
Publ.-Id: 30144


Modeling and understanding the dynamics of relativistic plasmas with particle-in-cell simulations

Bastrakov, S.; Bussmann, M.; Debus, A.; Garten, M.; Hübl, A.; Matthes, A.; Pausch, R.; Widera, R.; Starke, S.; Steiniger, K.

Keywords: particle-in-cell; plasma; laser particle acceleration

  • Poster
    CASUS Opening Symposium, 26.-28.08.2019, Görlitz, Deutschland

Permalink: https://www.hzdr.de/publications/Publ-30143
Publ.-Id: 30143


Industrial By-Products as Non-Conventional Supplementary Cementitious Material

Astoveza, J.; Abadias Llamas, A.; Soth, R.; Trauchessec, R.; Reuter, M.; Pontikes, Y.

The extensive efforts on reducing the carbon footprint of cement production have motivated the investigations on the use of supplementary cementitious materials (SCM) as additive and/or substitute in cement blends. However, previous studies were focused on limited types of SCM including natural pozzolans, ground granulated blast furnace slag (GGBFS) and fly ash – which could readily exhibit reactivity in cementitious systems. In this article, a review on the advances in the valorisation of novel industrial by-products (non-ferrous slag, municipal incinerator bottom ash, and jarosite waste) are presented to provide solution in reducing the volume of industrial landfills while creating greener materials for building applications. The second part of this paper demonstrates a case study applying exergy to compare the footprint of the flowsheets derived from the valorisation of industrial by-products as SCM.

Keywords: green cements; slag; supplementary cementitious materials; bottom ash; jarosite; exergy; life cycle assessment

  • Open Access Logo Lecture (Conference)
    iiSBE Forum of Young Researchers in Sustainable Building, 01.07.2019, Prague, Czech Republic

Permalink: https://www.hzdr.de/publications/Publ-30142
Publ.-Id: 30142


Accelerator mass spectrometry: Detection of "One in a Quadrillion"

Merchel, S.; Lachner, J.; Rugel, G.; Wallner, A.

Für die Veranstaltung ist kein Abstract erforderlich.

Keywords: AMS

Related publications

  • Lecture (others)
    Mass Spectrometry Christmas updates seminar, 17.12.2019, Dresden, Deutschland

Permalink: https://www.hzdr.de/publications/Publ-30141
Publ.-Id: 30141


HIFIS Software website: software.hifis.net

Erxleben, F.; Hüser, C.; Huste, T.

HIFIS Software Services' mission is to empower scientists of any domain to implement and to perpetuate modern scientific software development principles in order to make research software engineering more sustainable. The website of the platform is built using the static site generator Jekyll and available via https://software.hifis.net.

Keywords: Open Source; Software Engineering; Software; Development

  • Software in external data repository
    Publication year 2019
    Programming language: HTML, CSS, Javascript, Jekyll
    System requirements: Firefox, Chrome, Safari, Edge
    License: Code: GPLv3 Content: CC-BY-4.0 (Link to license text)
    Hosted on HZDR GitLab: Link to location

Permalink: https://www.hzdr.de/publications/Publ-30140
Publ.-Id: 30140


Observation of sub-femtosecond structures in laser wakefield accelerated electron bunches

Zarini, O.; Köhler, A.; Couperus Cabadağ, J. P.; Pausch, R.; Laberge, M.; Kurz, T.; Schöbel, S.; Bussmann, M.; Schramm, U.; Downer, M.; Debus, A.; Irman, A.

Laser wakefield accelerators (LWFA) feature unique electron bunch characteristics, namely micrometer beam size with duration ranging from a few fs to tens of fs. Precise knowledge of the longitudinal profile of such ultra-short electron bunches is essential for the design of future table-top x-ray light-sources.
Spectral measurements of broadband transition radiation from LWFA electron bunches passing through a metal foil are especially promising for non-destructively analyzing ultrashort longitudinal bunch characteristics with single-shot capability.

Our broadband, single-shot spectrometer combines the TR spectrum in UV/VIS (200-1000nm), NIR (0.9-1.7μm) and mid-IR (1.6-12μm). A complete characterization and calibration of the spectrometer have been done with regard to wavelengths, relative spectral sensitivities, and absolute photometric sensitivity. Our spectrometer is able to characterize electron bunches with charges as low as 1 pC and resolve time-scales from 0.4 to 40 fs. In addition, complementary data on the transverse bunch profile is provided by simultaneously imaging the CTR in the far- and near-field.

We present recent experimental results of different LWFA injection mechanisms, such as self-truncated ionization-injection and self-injection. By analyzing the transition radiation spectra and reconstructing electron bunch profiles including error analysis, we determine electron bunch profiles and peak currents of the respective injection regimes. In addition to bunch durations and peak currents, we discuss sub-fs beam micro-structures and systematic experimental scans of the nitrogen doping concentration for ionization-induced injection.

Related publications

  • Lecture (Conference)
    4th European Advanced Accelerator Concepts Workshop, 15.-21.09.2019, Elba, Italien

Permalink: https://www.hzdr.de/publications/Publ-30139
Publ.-Id: 30139


Characterization of the rotenone mouse model of Parkinson’s disease (PD) at early and late disease stage using radioligands for the α4β2 nicotinic acetylcholine receptor ((-)-[18F]Flubatine) and the adenosine A2A receptor ([18F]FESCH and [18F]FLUDA)

Toussaint, M.; Kranz, M.; Gündel, D.; Lai, T. H.; Schröder, S.; Dukic-Stefanovic, S.; Deuther-Conrad, W.; Teodoro, R.; Shang, Q.; Patt, M.; Reichmann, H.; Funk, R.; Sabri, O.; Pan-Montojo, F.; Brust, P.

Introduction
Systemic administration of rotenone is able to reproduce the main pathological and behavioral hallmarks of Parkinson’s Disease (PD) in mice. Therefore, those mice are potentially useful for the development of therapies targeting the nicotinic acetylcholine receptor (α4β2nAChR) or the adenosine A2A receptor (A2AR).
Thus, we evaluated the ability of the rotenone model to resemble the decreased availability of α4β2nAChR and the increased availability of A2AR found in the brain of PD patients [1,2,3]. PET/MR imaging was performed to quantify these changes at early and later stages of the disease.
Methods
Two groups of 12-14-months-old male C57BL/6JRj mice (27-36 g) treated for 2 months (n=6) or 4 months (n=7) with rotenone, 5 days/week, 5 mg/kg p.o., and their corresponding control groups (n=7 and n=5, respectively) were investigated. (-)-[18F]Flubatine (6.4±1.9 MBq; Am: 1185±713GBq/μmol) for α4β2nAChR investigation and [18F]FESCH (5.0±1.8 MBq; Am: 116±19 GBq/μmol, EOS) [4] or [18F]FLUDA (5.7±1.2 MBq; Am: 96±10 GBq/μmol, EOS) for A2AR investigation were injected intravenously followed by 60 min dynamic PET scans[4]. The cerebellum was used as a reference tissue. The time-activity curves (TACs) of the SUV ratio (SUVR) of thalamus or striatum over cerebellum were used as measure for specific uptake.
Results/discussion
Specific uptake of (-)-[18F]Flubatine was observed in the thalamus of control and rotenone mice (SUVR60min p.i. ~3.5, all groups included). However, for none of the two treatment groups changes in α4β2nAChR availability compared to the control group were detected (figure 1).
Specific uptake of [18F]FESCH and [18F]FLUDA was observed in the striatum of control and rotenone mice (SUVR10-20 min p.i. ~4.8, all groups included) (figure 2).
PET scans revealed no significant differences in A2AR availability between control group and 2 months rotenone treatment group. However, the SUVR of the 4 months rotenone treatment group were higher compared to the control group (SUVR20-40 min p.i. 3.4 vs. 2.9, respectively), although statistically not significant due to the rather small and highly variable data set.
Altogether, the trend of these results indicates no accordance with clinical findings although a slightly increased availability of A2AR during the course of the disease can be mentioned.
Conclusion
Taking into account the high variability of the dataset, the investigation by PET/MR of the rotenone mouse model after 2 mo. and 4 mo. treatment shows no concordance with the clinical findings regarding α4β2nAChR and A2AR availabilities.
We assume that the rotenone mouse model might not be suitable to assess PD-related changes in the availability of the two targets and thus perhaps not suitable for the investigation of the related targeting-drug.
Acknowledgments
The European Regional Development Fund and Sächsische Aufbaubank are acknowledged for financial support (Project No. 100226753).
References
[1] Vuorimaa et al. Contrast Media Mol Imaging 2017; 6975841. [2] Meyer et al., Arch Gen Psych 2009, 66 : 866-877. [3] Cannon et al., Neurobiol Dis 2009 ; 34 : 279-90. [4] Khanapur et al., J Nucl Med 2017; 58: 466–472.

Keywords: Adenosine 2A receptor; α4β2 nicotinic acetylcholine receptor; rotenone mouse model of Parkinson's disease; positon emission tomography

  • Poster (Online presentation)
    15th European Molecular Imaging Meeting, 24.-27.03.2020, Thessaloniki, Greece

Permalink: https://www.hzdr.de/publications/Publ-30138
Publ.-Id: 30138


Optimierungsaspekte bei der Herstellung von L-[11C]Methionin mit dem Tracerlab FXC-pro System

Mäding, P.; Zessin, J.; Knieß, T.

L-[11C]Methionin ([11C]Met) ist ein oft verwendetes PET-Radiopharmakon zur Diagnose Hirn-, Kopf-, Hals- sowie vom multiplen Myelom indizierten Tumoren. Die Radiosynthese von [11C]Met ausgehend von [11C]CO2 mit dem TRACERlab FXC-pro System liefert mitunter schwankende Ausbeuten, deren Ursache unklar ist.

Permalink: https://www.hzdr.de/publications/Publ-30137
Publ.-Id: 30137


Characterization of the sigma-1 receptors status with (S)-(-)-[18F]fluspidine PET of an orthotopic mouse model of glioblastoma to assess its potential in glioblastoma management

Toussaint, M.; Kranz, M.; Deuther-Conrad, W.; Patt, M.; Sabri, O.; Brust, P.

Introduction
The sigma-1 receptor (S1R) is a chaperone protein of the mitochondrion-associated endoplasmic reticulum membrane and regarded as potential therapeutic target for a variety of malignant tumors including glioblastoma. Noninvasive assessment of changes in the availability of S1R could help to better understand the pathophysiology of glioblastoma and to improve diagnosis or treatment follow-up. We aim to evaluate the potential of (S)-(−)-[18F]fluspidine, a highly specific S1R radioligand, to characterize the expression of S1R in an orthotopic glioblastoma model in mouse with small-animal PET/MRI.

Methods
U87 human glioblastoma cells were stereotactically implanted into the striatum of three female nude mice (8 weeks old). At a median tumor size of 27 mm3 (determined with MR) 60 min dynamic PET scans were performed after i.v. injection of (S)-(-)-[18F]fluspidine (9.1 ± 2.1 MBq; Am: 140 ± 50 GBq/µmol, EOS). Time-activity curves (TACs) from the tumor and the contralateral regions were analyzed (PMOD v3.9). Peak-to-end ratios (P/E; Peak: SUV mean from 2-9 min, end: SUV mean from 45-60 min) were used to compare regions. Statistics: unpaired two-tailed Student’s T-test (P < 0.05).
To determine the S1R affinity (KD) and density (Bmax) in the tumor and the contralateral region, in vitro autoradiography was performed with (S)-(-)-[18F]fluspidine using cryosections of tumor bearing mice.

Results & discussion
Autoradiography showed an equal affinity of [18F]fluspidine for S1R in the contralateral and tumor region (KD: 17.5 ± 1.3 vs. 18.0 ± 4.9 nM), but a higher Bmax in the tumor (490 ± 43 vs. 1756 ± 40 fmol/mg prot). PET TACs reflected significantly different kinetic profiles in the tumor and the contralateral side (P/E: 3.10 ± 0.48 vs. 1.81 ± 0.16, p < 0.05) (Figure 1). Interestingly, the tumor regions were characterized not only by a lower initial uptake compared to the contralateral side (SUV2-9 min p.i.: 0.89 vs. 1.17, p < 0.05) but also by a slower washout resulting in equivalent SUVs in both regions at 45 min p.i. (SUV45-60 min p.i.: 0.38 vs. 0.34 respectively). This slower radiotracer washout from the tumor compared to the contralateral side is assumed to be caused by the higher S1R site density found in the tumor, along with the specific pathophysiology of the tumor itself (neovascularization, oncotic pressure).

Conclusions
The PET investigation revealed a significant difference in the pharmacokinetics of (S)-(-)-[18F]fluspidine between the brain tumor and the contralateral region, probably related to different S1R availabilities. These results show the suitability of (S)-(-)-[18F]fluspidine for the non-invasive determination of the S1R status in an orthotopic glioblastoma model.

Keywords: Sigma-1 receptor; Positron emission tomography; orthotopic glioblastoma model

  • Poster (Online presentation)
    15th European Molecular Imaging Meeting, 24.-27.03.2020, Thessaloniki, Greece

Permalink: https://www.hzdr.de/publications/Publ-30135
Publ.-Id: 30135


Copper-mediated automated radiofluorination and biological evaluation of a highly affine cannabinoid receptors type 2 ligand with PET

Teodoro, R.; Toussaint, M.; Gündel, D.; Deuther-Conrad, W.; Wenzel, B.; Brust, P.; Moldovan, R.-P.

Objectives: The development of CB2R PET radioligands has been intensively explored due to the pronounced CB2R upregulation in various pathological conditions. Herein we report on the development of a series of highly affine fluorinated indole-carbamate ligands targeting the CB2R. Starting from a pinacol-ester precursor, cooper-mediated automated radiofluorination and preliminary biological evaluation were also performed for the most promising ligand.
Methods: A series of fifteen indole-carbamate derivatives was synthesized and their binding affinities (Ki) towards CB2R were determined. Compound RM365 was further selected for PET development due to its high CB2R affinity (KiCB2 = 2.1 nM) and pronounced selectivity over CB1R (factor >300). A fully automated copper-mediated radiofluorination of [18F]RM365 was established starting with the corresponding arylboronic ester precursor. The metabolic stability of [18F]RM365 was investigated in plasma and brain samples (30 min p.i) by radio HPLC. PET studies with [18F]RM365 were performed under baseline and blocking conditions (60 min scan).

Results: [18F]RM365 was obtained with moderate radiochemical yield (5%), high radiochemical purity (>98%) and molar activities of about 35 GBq/µmol. PET studies revealed that [18F]RM365 readily crossed the blood-brain barrier and accumulated in the spleen, a CB2R-rich organ. Metabolite studies at 30 min p.i. showed that 55% and 90% of the total extracted activity accounted for the percentage of parent tracer, in plasma and brain samples, respectively.

Conclusion: A fully automated cooper-mediated radiosynthesis was established for [18F]RM365. Further blocking experiments will demonstrate the CB2R specificity of [18F]RM365 in vivo and will be use as pass-fail criterion for further application of the radiotracer in CB2R-related animal models.

  • Poster
    Society of Nuclear Medicine and Molecular Imaging, 12.-16.06.2020, New Orlans, USA

Permalink: https://www.hzdr.de/publications/Publ-30134
Publ.-Id: 30134


Directionality of metal-induced crystallization and layer exchange in amorphous carbon/nickel thin film stacks

Janke, D.; Munnik, F.; Julin, J. A.; Hübner, R.; Grenzer, J.; Wüstefeld, C.; Gemming, S.; Rafaja, D.; Krause, M.

In thin amorphous carbon (a-C) films being in contact with a thin nickel layer, metal-induced crystallization and layer exchange (LE) occur at temperatures lower than 700 °C. Analysis of thin film stacks with different architectures (a-C/Ni, Ni/a-C and Ni/a-C/Ni) by means of ion beam analysis, Raman spectroscopy, X-ray diffraction and transmission electron microscopy revealed that the degree of LE and the structural quality of the crystallized carbon layers depend on the initial layer sequence. A LE degree of approx. 93 % was found for Ni/a-C bilayers, where graphenic layers formed on the Ni surface, whereas in a-C/Ni bilayers only 83 % of carbon was transferred from the surface towards the fused silica substrate. The diffusion of carbon in the outward direction produces turbostratic carbon with basal planes oriented parallel to the Ni surface, while for the inward direction planar and curved turbostratic structures coexist. The crystallization and the LE are driven by the crystallization energy of a-C. The LE is mediated by the wetting of the Ni grain boundaries by carbon. The directionality of the LE was explained primarily by the difference in the surface and interface energies in the a-C/Ni and Ni/a-C stacks that were obtained from thermodynamic considerations.

Keywords: metal-induced crystallization; layer exchange; carbon/nickel; thin films; turbostratic carbon; Raman spectroscopy; ion beam analysis

Related publications

Downloads

Permalink: https://www.hzdr.de/publications/Publ-30133
Publ.-Id: 30133


The Evolving Landscape of Biomarkers for Anti-PD-1 or Anti-PD-L1 Therapy

Tunger, A.; Sommer, U.; Wehner, R.; Kubasch, A. S.; Grimm, M.-O.; Bachmann, M.; Platzbecker, U.; Bornhaeuser, M.; Baretton, G.; Schmitz, M.

The administration of antibodies blocking the immune checkpoint molecules programmed cell death protein 1 (PD-1) or programmed cell death 1 ligand 1 (PD-L1) has evolved as a very promising treatment option for cancer patients. PD-1/PD-L1 inhibition has significantly enhanced expansion, cytokine secretion, and cytotoxic activity of CD4(+) and CD8(+) T lymphocytes, resulting in enhanced antitumor responses. Anti-PD-1 or anti-PD-L1 therapy has induced tumor regression and improved clinical outcome in patients with different tumor entities, including melanoma, non-small-cell lung cancer, and renal cell carcinoma. These findings led to the approval of various anti-PD-1 or anti-PD-L1 antibodies for the treatment of tumor patients. However, the majority of patients have failed to respond to this treatment modality. Comprehensive immune monitoring of clinical trials led to the identification of potential biomarkers distinguishing between responders and non-responders, the discovery of modes of treatment resistance, and the design of improved immunotherapeutic strategies. In this review article, we summarize the evolving landscape of biomarkers for anti-PD-1 or anti-PD-L1 therapy.

Keywords: cancer immunotherapy; immune monitoring; immune checkpoints; programmed cell death protein 1; programmed cell death 1 ligand 1

Permalink: https://www.hzdr.de/publications/Publ-30131
Publ.-Id: 30131


Radiopharmacological Evaluation of Cyclohexanediamine-Triazole-Peptide Conjugates Labeled via the Al18F-Approach

Sihver, W.; Böhme, J.; Walther, M.; Wodtke, R.; Reissig, F.; Mamat, C.; Neuber, C.; Ullrich, M.; Pietzsch, J.; Pietzsch, H.-J.

Aim/Introduction: The Al18F-labeling method is as modern technique an alternative to conventional 18F-labeling procedures that allows radiofluorination of biomolecules such as peptides and proteins in a one-step procedure in aqueous solution [1]. In search for versatile applicable chelators, which allow stable binding of both 18F and radiometals such as 68Ga or 111In, a cyclohexanediamine-triazole-chelator was designed. This chelator was conjugated via copper-catalyzed azide-alkyne cycloaddition (CuAAC) to the well-known binding motif (glutamate-urea-lysine) of the prostate-specific membrane antigen (PSMA) [2-5] complemented by 2-azidoacetyl moiety as linker unit (ligand L1). Furthermore, ligand L2 was synthesized bearing a 6-azidohexanoyl moiety as linker to investigate the influence of the linker on the stability of final 18F or radiometal complex.
The aim of this study was to investigate the radiopharmacological potential of L1 and L2 after radiolabeling regarding binding properties, cell internalization, and in vivo behavior in a murine prostate cancer model.
Methods: For the in vitro assays PSMA-positive LNCaP cells were used. The incubation with the respective radiolabeled ligand (RCY>95%) was terminated via a cell harvester. Internalization experiments were carried out by the “acid wash” method. In vivo studies (biodistribution and small animal PET) were performed with mice bearing a prostate tumor.
Results: In competition assays versus [177Lu]Lu-PSMA-617 (“gold standard”), the affinity of non-labeled L1 and L2 was slightly lower than that of PSMA-617. Saturation analysis of [68Ga]Ga-L1, [111In]In-L1, and [18F]F-L1 binding on LNCaP homogenate was comparable to [18F]F-L2 binding. The obtained Kd values were in a range of 20 to 30 nM. Internalization experiments with LNCaP cells revealed a lower uptake of the differently labeled L1 and L2 conjugates compared to [64Cu]Cu-PSMA-617.
Furthermore, in vivo behavior of both [18F]F-L1 and [18F]F-L2 was investigated in prostate carcinoma bearing mice by biodistribution experiments and small animal PET imaging. Thereby, PSMA dependent tumor uptake could be observed.
Conclusion: After successful radiolabeling, the conjugates L1 and L2 showed promising binding properties towards PSMA. The chelator presented here offers a flexible platform for radiolabeling of peptides or proteins for various PET and SPECT applications.
References: [1] F. Cleeren, Bioconjugate Chem. 2016, 27, 790. [2] K. Kopka, J. Nucl. Med. 2017, 58,17S. [3] H.R. Kulkarni, Br. J. Radiol. 2018, 91, 20180308. [4] Y. Tolkach, Breast Cancer Res.Treat. 2018, 169, 447. [5] M.C. Haffner, Hum.Pathol. 2009, 40, 1754.

Keywords: chelator; Al18F-labeling; 111In- and 68Ga-labeling; PSMA

  • Abstract in refereed journal
    European Journal of Nuclear Medicine and Molecular Imaging 46(2019)Suppl 1, OP-337
    DOI: 10.1007/s00259-019-04486-2

Downloads

  • Secondary publication expected

Permalink: https://www.hzdr.de/publications/Publ-30128
Publ.-Id: 30128


Effect of the dopant location and the number of Bragg mirrors on the performance of superlattice infrared photodetectors

Pereira, P. H.; Penello, G. M.; Pires, M. P.; Helm, M.; Schneider, H.; Souza, P. L.

We have investigated the influence of the position of the dopants and the number of Bragg mirrors in the confinement of localized states in the continuum of a InGaAs/InAlAs superlattice with a structural defect. The potential profile of the conduction band of the superlattice was determined by self-consistently solving the Schrödinger-Poisson equations. The influence of these parameters was analyzed by the oscillator strength of the optical transition between the ground state and the first localized state in the continuum. The best location for the dopants is in the structural defect quantum well, for which an oscillator strength of 0.25 was obtained. It is found that two Bragg mirrors are enough to confine the first localized state in the continuum without decreasing the oscillator strength of the optical transition from the ground state.

Keywords: superlattice infrared photodetector; InGaAs/AlGaAs; quantum well; continuum state

  • Contribution to proceedings
    IEEE Symposium on Microelectronics Technology and Devices (SBMicro), 26.-30.08.2019, São Paulo, Brazil
    2019 34th Symposium on Microelectronics Technology and Devices (SBMicro)
    DOI: 10.1109/SBMicro.2019.8919485

Permalink: https://www.hzdr.de/publications/Publ-30127
Publ.-Id: 30127


Systematic comparison of the structure of homoleptic tetradentate N₂O₂-type Schiff base complexes of tetravalent f-elements (M(IV) = Ce, Th, U, Np, and Pu) in solid state and in solution

Radoske, T.; Kloditz, R.; Fichter, S.; März, J.; Kaden, P.; Patzschke, M.; Schmidt, M.; Stumpf, T.; Walter, O.; Ikeda, A.

A series of tetradentate N₂O₂-type Schiff base complexes with tetravalent 4f-and 5f-block metals, [M(salpn)₂] (H₂salpn = N,N’-disalicylidene-1,3-diaminopropane; M = Ce, Th, U, Np, and Pu), were prepared to systematically investigate their solid state structure, and their complexation behaviour in solution with the goal to investigate the subtle differences between 4f and 5f-elements. X-ray diffraction revealed that all investigated metal cations form [M(salpn)₂] complexes. All the complexes show the same ligand arrangement with meridional conformation, amongst which only Ce(IV) exhibits unique behaviour upon crystallisation. [Ce(salpn)₂] crystallises in two less symmetric systems (P-1 or P2₁/n), whilst all the other [M(salpn)₂]
crystallise in a more symmetric orthorhombic system (Pban). Quantum chemical calculations suggest that the observed structural peculiarity of Ce(IV) stems from the geometrical flexibility due to the more "ionic" nature of bonds to the 4f element. ¹H NMR measurements revealed that [M(salpn)₂] forms two different species in solution with and without an additional solvent molecule, where the relative distribution of the two species depends mainly on the ionic radius of the metal centre. Again, Ce(IV) behaves differently from the tetravalent actinides with a higher ratio of the solvent-moleculecoordinated species than the ratio expected from its ionic radius. Hence, this study is successful in observing subtle differences between 4f- (i.e. Ce) and 5f-elements (actinides; Th, U, Np, and Pu) both in the solid state and in solution on an analytically distinguishable level, and in relating the observed subtle differences to their electronic structure.

Permalink: https://www.hzdr.de/publications/Publ-30126
Publ.-Id: 30126


High-current caesium sputter ion source with planar ionizer for accelerator mass spectrometry

Yordanov, D.; Hofsäss, H.; Rugel, G.; Akhmadaliev, S.; Borany, J.; Facsko, S.; Feige, J.

A new caesium sputter negative ion source with planar ionizer for Accelerator Mass Spectrometry (AMS) is being built, regarding quantifying the ratios of long-lived cosmogenic radionuclides in micrometeorites.
The focus of the ion source is on an optimal ion-optics design, together with a realization of new concepts for the construction and function of the ionizer, with the possibility of the precise in-situ adjustment of the ion-optical components, and optimization of the caesium ion beam and ion transport. In addition, the source is designed for operation with higher cathode voltage (up to 20 kV), which aims to increase the sputter rate of the sample, and in turn to increase the extracted negative current. Higher ion currents and better ion yields mean shorter measuring times, higher precision due to higher counting statistics and/or higher throughput of samples in an AMS runs.
The authors would like to thank the Federal Ministry of Education and Research of Germany for its financial support (project 05K2016), and the HZDR’s Ion Beam Center for its essential contribution to the realization of this project.

Keywords: New Mass Spectrometric Methods and Technical Developments

Related publications

Permalink: https://www.hzdr.de/publications/Publ-30125
Publ.-Id: 30125


Exploring the multiparameter nature of EUV-visible wave mixing at the FERMI FEL

Foglia, L.; Capotondi, F.; Höppner, H.; Gessini, A.; Giannessi, L.; Kurdi, G.; Lopez Quintas, I.; Masciovecchio, C.; Kiskinova, M.; Mincigrucci, R.; Naumenko, D.; Nikolov, I. P.; Pedersoli, E.; Rossi, G. M.; Simoncig, A.; Bencivenga, F.

The rapid development of extreme ultraviolet (EUV) and x-ray ultrafast coherent light sources such as free electron lasers (FELs) has triggered the extension of wave-mixing techniques to short wavelengths. This class of experiments, based on the interaction of matter with multiple light pulses through the Nth order susceptibility, holds the promise of combining intrinsic ultrafast time resolution and background-free signal detection with nanometer spatial resolution and chemical specificity. A successful approach in this direction has been the combination of the unique characteristics of the seeded FEL FERMI with dedicated four-wave-mixing (FWM) setups, which leads to the demonstration of EUV-based transient grating (TG) spectroscopy. In this perspective paper, we discuss how the TG approach can be extended toward more general FWM spectroscopies by exploring the intrinsic multiparameter nature of nonlinear processes, which derives from the ability of controlling the properties of each field independently.

Keywords: free-electron laser pulses; x-ray; four-wave-mixing experiments; coherence; spectroscopy

Downloads

Permalink: https://www.hzdr.de/publications/Publ-30124
Publ.-Id: 30124


A hybrid inclined rotating fixed bed reactor model for the identification of process intensification potential

Timaeus, R.; Schubert, M.; Hampel, U.

The superimposed rotation and inclination of a catalytic fixed bed reactor is a promising process intensification strategy for gas-limited multiphase reactions. The reactor inclination forces flow stratification and the rotation leads to a binary and intermittent catalyst wetting. This way, the accessibility of the gas-phase to the catalyst is enhanced and a twofold increase of the conversion for the α-methylstyrene hydrogenation was shown experimentally. In this contribution, a hybrid model approach is introduced to predict the space-time-yield for the hydrogenation of α-methylstyrene and to identify beneficial operating conditions to enhance the process performance.

Keywords: Multiphase reactor; transport phenomena; process intensification; reactor modeling

  • Invited lecture (Conferences)
    Gas-Liquid and Gas-Liquid-Solid Reactor Engineering (GLS-14), 30.05.-03.06.2019, Guilin, China

Permalink: https://www.hzdr.de/publications/Publ-30122
Publ.-Id: 30122


Identification of the process windows of inclined rotating fixed-bed reactors with concentric tube – a hydrodynamic analysis

Timaeus, R.; Schleicher, E.; Bieberle, A.; Hampel, U.; Schubert, M.

The inclined rotating fixed-bed reactor with inner tube is a promising process intensification concept for gas-limited reactions. In order to take full advantage of the reactor concept the installation of an inner concentric displacement tube is proposed to support the wetting intermittency of the whole fixed-bed at different liquid filling levels. The effects of operating conditions and design parameters on flow stratification, liquid filling level and specific pressure drop are analysed to identify the process window. In particular, the influence of superficial phase velocities, inclination angle, rotational velocity, particle diameter and inner tube diameter are studied. The liquid phase distribution is characterized with a capacitance-based wire-mesh sensor, which is adapted to cope with organic liquid, porous alumina catalyst packings and reactor rotation. Furthermore, the radial porosity distribution in the annular fixed-beds is determined using gamma-ray computed tomography.

Keywords: Inclined rotating fixed-bed; Process intensification; Capacitance wire-mesh sensor; Multiphase reactor

Related publications

Downloads

Permalink: https://www.hzdr.de/publications/Publ-30121
Publ.-Id: 30121


Kit-like 18F-labeling using triazole-linked conjugates for [18F]aluminum monofluoride complexation

Walther, M.; Neuber, C.; Bergmann, R.; Pietzsch, J.; Pietzsch, H.-J.

Objectives: For about 10 years, numerous ligands have been developed and tested for their suitability for 18F-labeling in the form of [18F]aluminum monofluoride. Initially, the well-known macrocyclic ligands NOTA and NODA [1,2] with high temperature reactions were used. Under current approaches, open chain ligands, derived from ethylene diamine, provide a much faster complex formation at lower temperatures (<40°C) [3]. The use of a terminal alkyne linker, as one of these new approaches, also enables the conjugation to target molecules via copper catalyzed azide-alkyne cycloaddition (CuAAC) as the final step in ligand synthesis. Furthermore, these triazole-containing ligands offer interesting additional applications, besides kit-like 18F-labeling, they also can be used for the stable fixation of other radiometal ions preferring a six-fold coordination. Radionuclides like 68Ga, 111In or 64Cu show promising results with these ligands and are under current investigation.
Methods: Ligand L1-L3 synthesis was carried out via CuAAC with subsequent product characterization. Radiolabeling reactions with the ligands L1-L3 were carried out under comparable conditions for different radionuclides: 0.1 M sodium acetate buffer pH 4-5, 10 µg ligand, 20 min mixing at room temperature with [68Ga]GaCl3, [111In]InCl3, [64Cu]CuCl2 or freshly prepared [18F]AlFCl2-solution. Examples for the ligand synthesis, radiolabeling experiments with different radionuclides, stability studies and initial in vitro and in vivo studies will be presented in this work.
Results: The [68Ga]Ga-L1, [64Cu]Cu-L1, and [18F]AlF-L1 complexes show comparable in vivo behavior 5 min after single intravenous injection in NMRI nu/nu mice. The gallium and fluorine labeled species show faster renal elimination than the copper compound. The [68Ga]Ga-L1 complex also shows higher stability in serum than the corresponding copper complex [64Cu]Cu-L1. The 18F-labeled species show very low defluorination in vivo and therefore high stability.
Conclusion: The incorporation of the ligand via CuAAC opens up many new possibilities for the radiolabeling of peptides and small antibody-derived proteins by 18F as coordinated [18F]aluminum monofluoride. Additional options are given due to the flexibility of the triazole-containing conjugates for further radionuclides like 68Ga, 64Cu and 111In.

Keywords: 18F-radiolabeling; aluminum monofluoride

  • Lecture (Conference)
    23rd International Symposium on Radiopharmaceutical Sciences, 26.-31.05.2019, Beijing, China
    DOI: 10.1002/jlcr.3724

Permalink: https://www.hzdr.de/publications/Publ-30119
Publ.-Id: 30119


Finite-size effects in ultrafast remagnetization dynamics of FePt

Willig, L.; von Reppert, A.; Deb, M.; Ganss, F.; Hellwig, O.; Bargheer, M.

We investigate the ultrafast magnetization dynamics of FePt in the L10phase after an optical heating pulse, asused in heat-assisted magnetic recording. We compare continuous and nano-granular thin films and emphasizethe impact of the finite size on the remagnetization dynamics. The remagnetization speeds up significantlywith increasing external magnetic field only for the continuous film, where domain-wall motion governs thedynamics. The ultrafast remagnetization dynamics in the continuous film are only dominated by heat transportin the regime of high magnetic fields, whereas the timescale required for cooling is prevalent in the granular filmfor all magnetic field strengths. These findings highlight the necessary conditions for studying the intrinsic heattransport properties in magnetic materials.

Permalink: https://www.hzdr.de/publications/Publ-30118
Publ.-Id: 30118


Pages: [1.] [2.] [3.] [4.] [5.] [6.] [7.] [8.] [9.] [10.] [11.] [12.] [13.] [14.] [15.] [16.] [17.] [18.] [19.] [20.] [21.] [22.] [23.] [24.] [25.] [26.] [27.] [28.] [29.] [30.] [31.] [32.] [33.] [34.] [35.] [36.] [37.] [38.] [39.] [40.] [41.] [42.] [43.] [44.] [45.] [46.] [47.] [48.] [49.] [50.] [51.] [52.] [53.] [54.] [55.] [56.] [57.] [58.] [59.] [60.] [61.] [62.] [63.] [64.] [65.] [66.] [67.] [68.] [69.] [70.] [71.] [72.] [73.] [74.] [75.] [76.] [77.] [78.] [79.] [80.] [81.] [82.] [83.] [84.] [85.] [86.] [87.] [88.] [89.] [90.] [91.] [92.] [93.] [94.] [95.] [96.] [97.] [98.] [99.] [100.] [101.] [102.] [103.] [104.] [105.] [106.] [107.] [108.] [109.] [110.] [111.] [112.] [113.] [114.] [115.] [116.] [117.] [118.] [119.] [120.] [121.] [122.] [123.] [124.] [125.] [126.] [127.] [128.] [129.] [130.] [131.] [132.] [133.] [134.] [135.] [136.] [137.] [138.] [139.] [140.] [141.] [142.] [143.] [144.] [145.] [146.] [147.] [148.] [149.] [150.] [151.] [152.] [153.] [154.] [155.] [156.] [157.] [158.] [159.] [160.] [161.] [162.] [163.] [164.] [165.] [166.] [167.] [168.] [169.] [170.] [171.] [172.] [173.] [174.] [175.] [176.] [177.] [178.] [179.] [180.] [181.] [182.] [183.] [184.] [185.] [186.] [187.] [188.] [189.] [190.] [191.] [192.] [193.] [194.] [195.] [196.] [197.] [198.] [199.] [200.] [201.] [202.] [203.] [204.] [205.] [206.] [207.] [208.] [209.] [210.] [211.] [212.] [213.] [214.] [215.] [216.] [217.] [218.] [219.] [220.] [221.] [222.] [223.] [224.] [225.] [226.] [227.] [228.] [229.] [230.] [231.] [232.] [233.] [234.] [235.] [236.] [237.] [238.] [239.] [240.] [241.] [242.] [243.] [244.] [245.] [246.] [247.] [248.] [249.] [250.] [251.] [252.] [253.] [254.] [255.] [256.] [257.] [258.] [259.] [260.] [261.] [262.] [263.] [264.] [265.] [266.] [267.] [268.] [269.] [270.] [271.] [272.] [273.] [274.] [275.] [276.] [277.] [278.] [279.] [280.] [281.] [282.] [283.] [284.] [285.] [286.] [287.] [288.] [289.] [290.] [291.] [292.] [293.] [294.] [295.] [296.] [297.] [298.] [299.] [300.] [301.] [302.] [303.] [304.] [305.] [306.] [307.] [308.] [309.] [310.] [311.] [312.] [313.] [314.] [315.] [316.] [317.] [318.] [319.] [320.] [321.] [322.] [323.] [324.] [325.] [326.] [327.] [328.] [329.] [330.] [331.] [332.] [333.] [334.] [335.] [336.] [337.] [338.] [339.] [340.] [341.] [342.] [343.] [344.] [345.] [346.] [347.] [348.] [349.]