Contact

Dr. Roland Beyer

Beam line scientist, radiation protection officer FWK
Nuclear Physics
roland.beyer@hzdr.de
Phone: +49 351 260 3281

Online Documentation

Hardware Configuration of the CES RIO PowerPCs

(old version up to March 2013)

Board info:

	RIO3-0	RIO3-1	RIO3-2	RIO3-3	RIO3-4	RIO4L-0	RIO4L-3	RIO4L-4
PPC boot rev.	4.90, Mon Oct 27 09:16:09 2003	4.95, Fri Jul 16 14:16:35 2004	5.25, Mon May 23 17:03:51 2005	5.30, Wed Feb 22 15:29:30 2006	5.30, Wed Feb 22 15:29:30 2006	5.59, Wed Apr 15 15:29:27 2009	5.73, Fri May 6 10:41:29	5.73, Fri May 6 10:41:29 2011
Module type / rev. / serial	8064VB / AB / 1508	8064VD / AA / 1806	8064WL / AA / 2329	8064WL / AA / 2946	8046WL / AB / 3585	8072RE / / 155	8072RE / / 463	8072RE / / 464
Host CPU / vers. / speed	PPC7400 / 11.04 / 500 MHz	PPC7400 / 11.04 / 500 MHz	PPC7447A / 1.02 / 800 MHz	PPC7457 / 1.02 / 800 MHz	PPC7457 / 1.02 / 800 MHz	PPC7448 / 2.2 / 996 MHz	PPC7448 / 2.2 / 996 MHz	PPC7448 / 2.2 / 996 MHz
PCI bridge	CES XPC	CES XPC	CES XPC	CES XPC	CES XPC	CES XPC	CES XPC	CES XPC
Memory size	64+0 = 64 Mbytes	256+0 = 256 MByte	256+0 = 256 MByte	256+0 = 256 MBytes	256+0 = 256 MBytes	512 Mbytes	512 Mbytes	512 Mbytes
L2 cache	1 Mbyte SSRAM 200 MHz	1 Mbyte SSRAM 200 MHz	1 Mbyte internal	1 Mbyte internal	1 Mbyte internal	256 kbytes SSRAM	1 Mbbyte internal	1 Mbbyte internal
L3 cache	N/A	N/A	2Mb div:4 Sample Point: 4(L3):2(CPU)	2Mb div:4 Sample Point: 4(L3):2(CPU)	2Mb div:4 Sample Point: 4(L3):2(CPU)	N/A	N/A	N/A
FPGA-1 rev.	N/A	N/A	N/A	N/A	N/A	05, 4, 2009-10-05 (05a49a05) (isle)	15, a8, 2011-05-10 (15a8b510) (isle)	15, a8, 2011-05-10 (15a8b510) (isle)
FPGA-2 rev.	N/A	N/A	N/A	N/A	N/A	00, a4, 2009-10-05 (00a49a05) (isle)	00, a9, 2013-03-12 (00a9d312) (isle)	00, a9, 2013-03-12 (00a9d312) (isle)
FPROM	Two banks of AMD29F032 installed [16 Mbytes]	Two banks of AMD29F032 installed [16 Mbytes	Two banks of AMD29F032 installed [16 Mbytes]	Two banks of AMD29F032 installed [16 Mbytes]	Two banks of AMD29F032 installed [16 Mbytes]	One bank of S29GL512N installed [64 Mbytes]	One bank of S29GL512N installed [64 Mbytes]	One bank of S29GL512N installed [64 Mbytes]
Ethernet Address	00:80:a2:01:05:f4	00:80:a2:01:07:1e	00:80:a2:01:09:29	00:80:a2:01:0b:92	00:80:a2:01:0e:11	ETH1: ETH2:	ETH1: 00:80:a2:10:c3:ae ETH2: 00:80:a2:10:c3:af	ETH1: 00:80:a2:10:c3:b0 ETH2: 00:80:a2:10:c3:b1
NANDFLASH	N/A	N/A	N/A	N/A	N/A	Unrecognised (type:00000000, 00000000)	1 bank of Samsung K9F1G08U0M [128 Mbytes]	1 bank of Samsung K9F1G08U0M [128 Mbytes]

Setting of the onboard switches for the multibranch system:

	RIO2-X
SW22-1	OFF
SW22-2	OFF
SW22-3	OFF
SW22-4	OFF

	RIO2-X
SW23-1	OFF
SW23-2	OFF
SW23-3	ON
SW23-4	OFF

		RIO3-X
SW300-1	USER_IO	OFF
SW300-2	VME LI	OFF
SW300-3	VME64x	OFF
SW300-4	Slot 1	ON

SW301

Base Add

SW400-1	SW_Reset	OFF
SW400-2	P0_Master	ON
SW400-3	P0_ClkSel	OFF
SW400-4	PMC_JTAG	OFF

SW401-1	CPDL_Prog	OFF
SW401-2	PPC_Debug	OFF
SW401-3	Boot_Sel	OFF
SW401-4	VME_ClkSel	OFF

		RIO4-X
SW400-1	Boot Mode	OFF
SW400-2	Altern. Boot	OFF
SW400-3	P0 JTAG	OFF
SW400-4	Lemo Mode 2	OFF

SW401-1	NOR Flash	OFF
SW401-2	NAND Flash	OFF
SW401-3	Lemo Mode 1	OFF
SW401-4	P0 Mode	OFF

SW402-1	Slot 1	ON
SW402-2	VME64x	OFF
SW402-3	VME Reset	OFF
SW402-4	Reserved	OFF

Setting of the boot parameters:

	RIO2-0	RIO2-1	RIO3-0 (updated)	RIO3-1 (updated)	RIO3-2 (updated)	RIO3-3	RIO3-4 (updated)
boot_flags	S	a
boot_device	le
boot_filename	/tftpboot/lynx/2.5_rio2_net.boot.FZR		/tftpboot/3.1_rio3_net.boot_HZDR
boot_rootfs	rd
boot_delay	7 sec
boot_address	4000
boot_size	6000000	2000000		4000000
boot_fast	n
boot_filetype	binary
boot_cpunr	N/A	0
boot_mode	N/A	auto
boot_line	N/A
inet_host	149.220.60.46	149.220.60.47	149.220.60.45	149.220.60.53	149.220.60.48	149.220.60.30	149.220.60.49
inet_host_2	N/A
inet_bplane	0.0.0.0
inet_bootserver	149.220.61.149	149.220.60.12	149.220.63.20
inet_gateway	149.220.4.1
inet_nameserver	149.220.4.2
inet_protocol		arpa
inet_mount	urania.fz-rossendorf.de: /home/lynx/RIO2_2.5	zirkonia: /home/lynx/RIO2_2.5
inet_ethermode	N/A		auto
vme_arb_mode	prio			rrs
vme_arb_bto	16			32
vme_req_mode	rwd			fair		ror	fair
vme_req_hidden	n		N/A
vme_req_level	3			1
vme_req_lto	32		N/A
vme_req_retry	n		N/A
vme_slv_a24base	0x000000 enabled	N/A
vme_slv_a32base	0x000000 disabled	N/A
vme_slv_a32size	16	N/A
vme_slv_size	N/A	32
vme_slv_a24	N/A	0x000000 enabled	N/A
vme_slv_a32	N/A	0x000000 disabled	0	2000000		20000000	2000000
vme_slv_latency	127 clock cycles		N/A
vme_slv_a64	N/A		0
vme_slv_a32bc	N/A		0
vme_slv_a64bc	N/A		0
vme_slv_enable	N/A		n
vme_slv_prefetch	N/A		16
vme_slv_retry	N/A		y
vme_64x_2efast	N/A		n
vme_64x_broadcast	N/A		no_brc
vme_64x_rcfilter	N/A		n
vme_64x_uncpld	N/A		n
vme_64x_masli	N/A		y
vme_intr_vector	N/A	0
vme_intr_level	N/A	0
vme_bma_swap	autoswap		noswap
vme_bma_am	a32u		a24u	a24s
vme_bma_dsz	d32
vme_bma_vbsz	4			0
vme_bma_pbsz	4			0
vme_bma_inc	y
vme_bma_space	sysmem			pio
diag_sysmem	n
diag_mmu	n
diag_bridge	N/A	n
diag_intctl	n
diag_serial	n
diag_timers	n
diag_fifos	n
diag_keyboard	n
diag_thermo	n
diag_pci	n
diag_ethernet	n
diag_pmc1	n
diag_pmc2	n
diag_pmc3	N/A				n
diag_pmc4	N/A				n
diag_pmc5	N/A				n
diag_vme	n
diag_xpci	n
diag_save_sram	N/A
bridge_pci_count		0	N/A
bridge_ecc_serr	n	N/A
bridge_pci_serr	N/A	n	N/A
bridge_pci_parity	n		N/A
bridge_pci_watchdog	n		N/A
bridge_pci_disc	0		N/A
bridge_lpci_s64	N/A		y
bridge_lpci_prefetch	N/A		8	32
bridge_lpci_flush	N/A		n
bridge_lpci_xpcarb	N/A		0
bridge_lpci_pciarb	N/A		0
bridge_lpci_mretry	N/A		n
bridge_lpci_timer	N/A		2E16
bridge_lpci_parity	N/A		0
bridge_lpci_rcmpld	N/A		n
bridge_lpci_2pmc	N/A		y
bridge_xpci_ena	N/A		n
bridge_xpci_s64	N/A		y
bridge_xpci_size	N/A		32
bridge_xpci_prefetch	N/A		8
bridge_xpci_flush	N/A		n
bridge_xpci_mretry	N/A		n
bridge_xpci_sretry	N/A		n
bridge_xpci_timer	N/A		2E16
bridge_xpci_parity	N/A		0
bridge_xpci_rcmpld	N/A		n
pmc_1_power	N/A
pmc_2_power	N/A
intr_mask_err	y
intr_debug	n
cache_i_ena	n		y
cache_d_ena	n		y
cache_l2_ena	n		y
cache_l2_parity	n	N/A	n
cache_l2_do	N/A		n
cache_l3_ena	N/A				n
cache_l3_parity	N/A				n
cache_l3_do	N/A				n
cache_l3_io	N/A				n
cache_l3_param	N/A				22
para_1 ... para_4
para_5
para_ramdisk	N/A
para_6 ... para_14
para_15		N/A
test_debug	N/A	y
test_loop	N/A	1
test_error	N/A	stop
test_abort	N/A	stop
test_ini	N/A	n
test_start	N/A	0
test_step	N/A	n
dma_chan0_slot	N/A	2
dma_chan0_func	N/A	0
dma_chan0_bus	N/A	0	100
dma_chan0_script	N/A	0
dma_chan1_slot	N/A	3
dma_chan1_func	N/A	0
dma_chan1_bus	N/A	0	100
dma_chan1_script	N/A	0
dma_chan2_slot	N/A	2
dma_chan2_func	N/A	1
dma_chan2_bus	N/A	0	100
dma_chan2_script	N/A	0
dma_chan3_slot	N/A	3
dma_chan3_func	N/A	1
dma_chan3_bus	N/A	0	100
dma_chan3_script	N/A	0
cpu_parity_ena	N/A		n
cpu_parity_gen	N/A		y
cpu_parity_check	N/A		n
temp_cpu_high	N/A	60 degrees	80 degrees	60 degrees
temp_cpu_low	N/A	55 degrees
temp_cpu_ctl	N/A	warn		halt
temp_sdram_high	N/A		70 degrees
temp_sdram_low	N/A		65 degrees
temp_sdram_ctl	N/A		warn
temp_pmc2_high	N/A		60 degrees
temp_pmc2_low	N/A		55 degrees
temp_pmc2_ctl	N/A		warn
temp_t0_high	N/A
temp_t0_low	N/A
temp_t0_ctl	N/A
temp_t1_high	N/A
temp_t1_low	N/A
temp_t1_ctl	N/A
temp_t2_high	N/A
temp_t2_low	N/A
temp_t2_ctl	N/A
thermo_1_hihi	N/A
thermo_1_hilo	N/A
thermo_1_lohi	N/A
thermo_1_lolo	N/A
thermo_2_hihi	N/A
thermo_2_hilo	N/A
thermo_2_lohi	N/A
thermo_2_lolo	N/A
thermo_3_hihi	N/A
thermo_3_hilo	N/A
thermo_3_lohi	N/A
thermo_3_lolo	N/A
thermo_4_hihi	N/A
thermo_4_hilo	N/A
thermo_4_lohi	N/A
thermo_4_lolo	N/A
thermo_5_hihi	N/A
thermo_5_hilo	N/A
thermo_5_lohi	N/A
thermo_5_lolo	N/A
thermo_6_hihi	N/A
thermo_6_hilo	N/A
thermo_6_lohi	N/A
thermo_6_lolo	N/A
thermo_7_hihi	N/A
thermo_7_hilo	N/A
thermo_7_lohi	N/A
thermo_7_lolo	N/A
thermo_ctl_halt	N/A

	RIO4-0 (updated)	RIO4-1 RIO4L-1	RIO4-2 RIO4L-2	RIO4L-0 (updated)	RIO4L-3 (updated)	RIO4L-4 (updated)
boot_flags	a
boot_device	le			g1
boot_filename	/tftpboot/4.0_rio4_net.boot_HZDR			/tftpboot/zImage_3.3.10
boot_rootfs	rd			nfs
boot_delay	7 sec
boot_address	4000			1000000
boot_size	8000000			0
boot_fast	n
boot_filetype	binary
boot_cpunr	0
boot_mode	auto
boot_line				ip=:::::eth1:arpa console=ttyS3
inet_host	149.220.60.40	149.220.60.65	149.220.62.72	149.220.60.60	149.220.62.123	149.220.60.39
inet_host_2	0.0.0.0	149.220.60.67	149.220.62.219	149.220.60.60	149.220.62.123	149.220.60.39
inet_bplane	0.0.0.0
inet_bootserver	149.220.63.20	149.220.60.12		149.220.63.20
inet_gateway	149.220.4.1			0.0.0.0
inet_nameserver	149.220.4.2			0.0.0.0
inet_protocol	arpa
inet_mount		zirkonia: /home/lynx/RIO4_4.0		/LynxOS/suha_rio4/3.3.10/rootfs-eldk-ppc_74xx
inet_ethermode	auto
vme_arb_mode	rrs
vme_arb_bto	0
vme_req_mode	ror
vme_req_hidden	n
vme_req_level	0
vme_req_lto	8
vme_req_retry	n
vme_slv_a24base	N/A
vme_slv_a32base	N/A
vme_slv_a32size	N/A
vme_slv_size	16
vme_slv_a24	N/A
vme_slv_a32	0
vme_slv_latency	N/A
vme_slv_a64	0
vme_slv_a32bc	0
vme_slv_a64bc	0
vme_slv_enable	n
vme_slv_prefetch	16
vme_slv_retry	n
vme_64x_2efast	n
vme_64x_broadcast	no_brc
vme_64x_rcfilter	n
vme_64x_uncpld	n
vme_64x_masli	n
vme_intr_vector	0
vme_intr_level	0
vme_bma_swap	noswap
vme_bma_am	a24s
vme_bma_dsz	d32
vme_bma_vbsz	0
vme_bma_pbsz	0
vme_bma_inc	y
vme_bma_space	pio
diag_sysmem	n
diag_mmu	n
diag_bridge	n
diag_intctl	n
diag_serial	n
diag_timers	n
diag_fifos	n
diag_keyboard	N/A
diag_thermo	n
diag_pci	n
diag_ethernet	n
diag_pmc1	n
diag_pmc2	n
diag_pmc3	n
diag_pmc4	n
diag_pmc5	N/A
diag_vme	n
diag_xpci	n
diag_save_sram	n
bridge_pci_count	N/A
bridge_ecc_serr	N/A
bridge_pci_serr	N/A
bridge_pci_parity	N/A
bridge_pci_watchdog	N/A
bridge_pci_disc	N/A
bridge_lpci_s64	y
bridge_lpci_prefetch	8
bridge_lpci_flush	n
bridge_lpci_xpcarb	0
bridge_lpci_pciarb	0
bridge_lpci_mretry	n
bridge_lpci_timer	2E16
bridge_lpci_parity	0
bridge_lpci_rcmpld	n
bridge_lpci_2pmc	y
bridge_xpci_ena	n
bridge_xpci_s64	y
bridge_xpci_size	32
bridge_xpci_prefetch	8
bridge_xpci_flush	n
bridge_xpci_mretry	n
bridge_xpci_sretry	n
bridge_xpci_timer	2E16
bridge_xpci_parity	0
bridge_xpci_rcmpld	n
pmc_1_power	100ms
pmc_2_power	100ms
intr_mask_err	y
intr_debug	n
cache_i_ena	y
cache_d_ena	y
cache_l2_ena	y
cache_l2_parity	n
cache_l2_do	n
cache_l3_ena	N/A
cache_l3_parity	N/A
cache_l3_do	N/A
cache_l3_io	N/A
cache_l3_param	N/A
para_1 ... para_4
para_5	N/A
para_ramdisk	20m				N/A
para_6 ... para_14
para_15	N/A
test_debug	y
test_loop	1
test_error	stop
test_abort	stop
test_ini	n
test_start	0
test_step	n
dma_chan0_slot	2
dma_chan0_func	0
dma_chan0_bus	0
dma_chan0_script	0
dma_chan1_slot	3
dma_chan1_func	0
dma_chan1_bus	0
dma_chan1_script	0
dma_chan2_slot	2
dma_chan2_func	1
dma_chan2_bus	0
dma_chan2_script	0
dma_chan3_slot	3
dma_chan3_func	1
dma_chan3_bus	0
dma_chan3_script	0
cpu_parity_ena	n
cpu_parity_gen	n
cpu_parity_check	n
temp_cpu_high	N/A
temp_cpu_low	N/A
temp_cpu_ctl	N/A
temp_sdram_high	N/A
temp_sdram_low	N/A
temp_sdram_ctl	N/A
temp_pmc2_high	N/A
temp_pmc2_low	N/A
temp_pmc2_ctl	N/A
temp_t0_high	60 degrees
temp_t0_low	55 degrees
temp_t0_ctl	no
temp_t1_high	60 degrees
temp_t1_low	55 degrees
temp_t1_ctl	no
temp_t2_high	60 degrees
temp_t2_low	55 degrees
temp_t2_ctl	no
thermo_1_hihi	60 degrees
thermo_1_hilo	55 degrees
thermo_1_lohi	-15 degrees				-35 degrees
thermo_1_lolo	-20 degrees				-40 degrees
thermo_2_hihi	60 degrees
thermo_2_hilo	55 degrees
thermo_2_lohi	-15 degrees				-35 degrees
thermo_2_lolo	-20 degrees				-40 degrees
thermo_3_hihi	60 degrees
thermo_3_hilo	55 degrees
thermo_3_lohi	-35 degrees
thermo_3_lolo	-40 degrees
thermo_4_hihi	60 degrees
thermo_4_hilo	55 degrees
thermo_4_lohi	-35 degrees
thermo_4_lolo	-40 degrees
thermo_5_hihi	60 degrees
thermo_5_hilo	55 degrees
thermo_5_lohi	-35 degrees
thermo_5_lolo	-40 degrees
thermo_6_hihi	60 degrees
thermo_6_hilo	55 degrees
thermo_6_lohi	-35 degrees
thermo_6_lolo	-40 degrees
thermo_7_hihi	60 degrees
thermo_7_hilo	55 degrees
thermo_7_lohi	-35 degrees
thermo_7_lolo	-40 degrees
thermo_ctl_halt	no