Dr. Stephan Winnerl

Lei­ter Spektroskopie
Tel.: +49 351 260 3522


6-7.07.2023 | FWIH-Retreat in Neukirch/Lausitz

05.07.2023 | Unsere Publikation über die Pump-Probe-Spektroskopie von BaFe2As2 bei hohen Drücken und niedrigen Temperaturen wurde als Editors' Suggestion ausgewählt

09.06.2022 | FWIH-Treffen von aktuellen und ehemaligen Mitgliedern

THz technology, THz vector beams

Photoconductive emitters excited with femtosecond laser pulses are a widely used source for single-cycle terahertz (THz) radiation pulses. By application of an interdigitated electrode geometry we have improved the emitter efficiency and THz output power significantly. To prevent destructive interference of THz wavelets generated by electrons that are accelerated in opposite directions, a second metallization (green in figure) prevents photogeneration of carriers in every second gap between the electrodes. Emitters based on this patented design are commercially available.

Semi-insulating GaAs is the standard material for photoconductive emitters excited with near infrared radiation from titanium-sapphire lasers. Modification of the material by ion beam irradiation results in the generation of trapping centers, which efficiently reduce the carrier lifetime. Such materials are well suited for photoconductive terahertz detectors. Materials exhibiting a lower band gap (such as InGaAs) and at the same time high resistivities are of interest for devices with can be excited with compact fiber lasers operating at 1.55 µm.

Scalable THz emitters offer freedom with respect to the electrode geometry. This can be used to generate modes that differ from the commonly used linearly polarized Gauss beams. These more general modes are called vector beams since they are solutions of the vector Helmholz equation. We generated radially and azimuthally polarized THz beams by photoconductive emitters. Especially radially polarized beams have interesting properties. They can be focussed to smaller spot sizes as compared to linearly polarized beams and they exhibit longitudinal field components in the focus. Furthermore they are well suited for exciting guided modes on metal wires, so called Sommerfeld modes.

Related publications

S. Winnerl, B. Zimmermann, F. Peter, H. Schneider, M. Helm, Terahertz Bessel-Gauss beams of radial and azimuthal polarization from microstructured photoconductive antennas, Optics Express 17, 1571-1576 (2009).

F. Peter, S. Winnerl, H. Schneider, M. Helm, K. Köhler, Terahertz emission from a large-area GaInAsN emitter, Appl. Phys. Lett. 93, 101102 (2008).

F. Peter, S. Winnerl, S. Nitsche, A. Dreyhaupt, H. Schneider, M. HelmCoherent terahertz detection with a large-area, non-resonant photoconductive THz antenna,  Appl. Phys. Lett. 91, 081109 (2007)

A. Dreyhaupt, S. Winnerl, M. Helm, T. Dekorsy, Optimum excitation conditions for the generation of high-electric-field THz radiation from an oscillator-driven photoconductive device, Optics Lett. 31, 1546 (2006)

A. Bartels, A. Thoma, C. Janke, T. Dekorsy, A. Dreyhaupt, S. Winnerl, M. Helm, High-resolution THz spectrometer with kHz scan rates, Optics Express 14, 430 (2006)

A. Dreyhaupt, S. Winnerl, T. Dekorsy, M. Helm, High-intensity THz radiation from a microstructured large area photoconductor, Appl. Phys. Lett. 86, 121114 (2005)