Kontakt

Dr. Eberhard Altstadt
Leiter
e.altstadtAthzdr.de
Tel.: +49 351 260 2276
Fax: +49 351 260 12276, +49 351 260 2205

Dr. Cornelia Heintze
Leiterin Konstruktionswerkstoffe
c.heintzeAthzdr.de
Tel.: +49 351 260 3431

Sonja Rott
Konstruktionswerkstoffe
s.rottAthzdr.de
Tel.: +49 351 260 2780
Fax: +49 351 260 12780, +49 351 260 2205

orangener PfeilPublika­tionen

orangener PfeilHeiße Zellen

Vorschau-Bild

2018

Why do secondary cracks preferentially form in hot-rolled ODS steels in comparison with hot-extruded ODS steels?
Das, A.ORC; Viehrig, H. W.; Altstadt, E.ORC; Bergner, F.ORC; Hoffmann, J.ORC
Verknüpfte Publikationen
Why are hot-rolled ODS steels more prone to secondary… (Id 28114) is an alternate identifier of this publication
Determining the ultimate tensile strength of fuel cladding tubes by small punch testing
Simonovski, I.; Baraldi, D.; Holmström, S.; Altstadt, E.ORC; Delville, R.; Bruchhausen, M.
Effect of ausforming temperature on creep strength of G91 investigated by means of small punch creep tests
Vivas, J.; Capdevila, C.ORC; Altstadt, E.ORC; Houska, M.; Serrano, M.ORC; De-Castro, D.; San-Martin, D.
Importance of austenitization temperature and ausforming on creep strength in 9Cr ferritic/martensitic steel
Vivas, J.; Capdevila, C.ORC; Altstadt, E.ORC; Houska, M.; San-Martin, D.
Nanoindentation of ion-irradiated reactor pressure vessel steels – model-based interpretation and comparison with neutron irradiation
Röder, F.; Heintze, C.; Pecko, S.; Akhmadaliev, S.; Bergner, F.ORC; Ulbricht, A.; Altstadt, E.
Fe2+ ion irradiated JRQ steel investigated by nanoindentation and slow-positron Doppler broadening spectroscopy
Pecko, S.; Heintze, C.; Bergner, F.; Anwand, W.; Slugen, V.
On the estimation of ultimate tensile stress from small punch testing
Altstadt, E.; Houska, M.; Simonovski, I.; Bruchhausen, M.; Holmström, S.; Lacalle, R.
Helium-ion microscopy, helium-ion irradiation and nanoindentation of Eurofer 97 and ODS Eurofer
Bergner, F.ORC; Hlawacek, G.; Heintze, C.

2017

Synthesis of High-Crystallinity DPP Polymers with Balanced Electron and Hole Mobility
Di Pietro, R.; Erdmann, T.; Carpenter, J. H.; Wang, N.; Shivhare, R. R.; Formanek, P.; Heintze, C.; Voit, B.; Neher, D.; Ade, H.; Kiriy, A.
On the influence of microstructure on fracture behaviour of hot extruded ferritic ODS steels
Das, A.; Viehrig, H. W.; Altstadt, E.; Heintze, C.; Hoffmann, J.
The effect of the initial microstructure in terms of sink strength on the ion-irradiation-induced hardening of ODS alloys studied by nanoindentation
Duan, B.; Heintze, C.; Bergner, F.ORC; Ulbricht, A.; Akhmadaliev, S.; Oñorbe, E.; de Carlan, Y.; Wang, T.
Microstructure characterization and strengthening mechanisms of oxide dispersion strengthened (ODS) Fe-9%Cr and Fe-14%Cr extruded bars
Chauhan, A.; Bergner, F.ORC; Etienne, A.; Aktaa, J.; de Carlan, Y.; Heintze, C.; Litvinov, D.; Hernandez-Mayoral, M.; Oñorbe, E.; Radiguet, B.; Ulbricht, A.
Aqueous Gold Overgrowth of Silver Nanoparticles: Merging the Plasmonic Properties of Silver with the Functionality of Gold
Mayer, M.; Steiner, A. M.; Röder, F.; Formanek, P.; König, T. A. F.; Fery, A.
Effect of microstructural anisotropy on fracture toughness of hot rolled 13Cr ODS steel – the role of primary and secondary cracking
Das, A.; Viehrig, H. W.; Bergner, F.; Heintze, C.; Altstadt, E.; Hoffmann, J.
Model-based magnetization retrieval from holographic phase images
Röder, F.; Vogel, K.; Wolf, D.; Hellwig, O.; Wee, S. H.; Wicht, S.; Rellinghaus, B.
The role of the internal demagnetizing field for the dynamics of a magnonic crystal
Langer, M.; Röder, F.; Gallardo, R. A.; Schneider, T.; Stienen, S.; Gatel, C.; Hübner, R.; Bischoff, L.; Lenz, K.; Lindner, J.; Landeros, P.; Fassbender, J.ORC

2016

JRQ and JPA irradiated and annealed reactor pressure vessel steels studied by positron annihilation
Slugen, V.; Gokhman, O.; Pecko, S.; Sojak, S.; Bergner, F.
Transmission electron microscopy investigation of the microstructure of Fe-Cr alloys induced by neutron and ion irradiation at 300ºC
Hernández-Mayoral, M.; Heintze, C.; Onorbe, E.
Alternative fabrication routes toward oxide dispersion strengthened steels and model alloys
Bergner, F.ORC; Hilger, I.; Virta, J.; Lagerbom, J.; Gerbeth, G.; Connolly, S.; Hong, Z.; Grant, P. S.; Weissgärber, T.
Effect of neutron flux on the characteristics of irradiation-induced nanofeatures and hardening in pressure vessel steels
Wagner, A.; Bergner, F.; Chaouadi, R.; Hein, H.; Hernández-Mayoral, M.; Serrano, M.; Ulbricht, A.; Altstadt, E.
Effect of anisotropic microstructure of a 12Cr ODS steel on the fracture behaviour in the small punch test
Altstadt, E.; Serrano, M.; Houska, M.; Garcia-Junceda, A.
Irradiation hardening of Fe-9Cr-based alloys and ODS Eurofer: effect of helium implantation and iron-ion irradiation at 300 °C including sequence effects
Heintze, C.; Bergner, F.; Hernandez-Mayoral, M.; Kögler, R.; Müller, G.; Ulbricht, A.
Fabrication and characterization of oxide dispersion strengthened (ODS) 14Cr steels consolidated by means of hot isostatic pressing, hot extrusion and spark plasma sintering
Hilger, I.; Boulnat, X.; Hoffmann, J.; Testani, C.; Bergner, F.; de Carlan, Y.; Ferraro, F.; Ulbricht, A.
Critical evaluation of the small punch test as a screening procedure for mechanical properties
Altstadt, E.; Ge, H. E.; Kuksenko, V.; Serrano, M.; Houska, M.; Lasan, M.; Bruchhausen, M.; Lapetite, J.-M.; Dai, Y.
Ion irradiation combined with nanoindentation as a screening test procedure for irradiation hardening
Heintze, C.; Bergner, F.; Akhmadaliev, S.; Altstadt, E.
Investigation of spark plasma sintered oxide-dispersion strengthened steels by means of small-angle neutron scattering
Hilger, I.; Bergner, F.; Ulbricht, A.; Wagner, A.; Weißgärber, T.; Kieback, B.; Heintze, C.; Dewhurst, C. D.

2015

Direct Depth- and Lateral- Imaging of Nanoscale Magnets Generated by Ion Impact
Röder, F.; Hlawacek, G.; Wintz, S.; Hübner, R.; Bischoff, L.; Lichte, H.; Potzger, K.; Lindner, J.; Fassbender, J.ORC; Bali, R.
Comparison of Consolidation Routes for Mo-Si-B Materials Prepared by Using Nitride Containing Powders
Wiltner, A.; Klöden, B.; Hilger, I.; Weißgärber, T.; Kieback, B.
Bimodal grain size distribution of nanostructured ferritic ODS Fe-Cr alloys
Hilger, I.; Bergner, F.; Weißgärber, T.
Towards safe long-term operation of reactor pressure vessels
Rouden, J.; Hein, H.; May, J.; Planman, T.; Todeschini, P.; Brumovsky, M.; Ballesteros, A.; Gillemot, F.; Chaouadi, R.; Efsing, P.; Altstadt, E.
  • atw - International Journal for Nuclear Power 60(2015)5, 287-293
Contributions of Cu-rich clusters, dislocation loops and nanovoids to the irradiation-induced hardening of Cu-bearing low-Ni reactor pressure vessel steels
Bergner, F.; Gillemot, F.; Hernández-Mayoral, M.; Serrano, M.; Török, G.; Ulbricht, A.; Altstadt, E.
Radiation and annealing response of WWER 440 beltline welding seams
Viehrig, H.-W.; Houska, M.; Altstadt, E.
Investigations on in-vessel melt retention by external cooling for a generic VVER-1000 reactor
Tusheva, P.; Altstadt, E.; Willschütz, H.-G.; Fridman, E.; Weiß, F.-P.
Radiation response of the overlay cladding from the decommissioned WWER-440 Greifswald unit 4 reactor pressure vessel
Viehrig, H.-W.; Altstadt, E.; Houska, M.

2014

Reactor pressure vessel surveillance
Ballesteros, A.; Hein, H.; May, J.; Planman, T.; Todeschini, P.; Brumovsky, M.; Gillemot, F.; Chaouadi, R.; Rouden, J.; Efsing, P.; Altstadt, E.
  • Nuclear Engineering International 59(2014)724, 19-20
FP7 Project LONGLIFE: Overview of Results and Implications
Altstadt, E.; Keim, E.; Hein, H.; Serrano, M.; Bergner, F.; Viehrig, H.-W.; Ballesteros, A.; Chaouadi, R.; Wilford, K.
Microstructural and mechanical characterisation of ODS ferritic alloys produced by mechanical alloying and spark plasma sintering
Hernández-Mayoral, M.; Serrano, M.; Oñorbe, E.; García-Junceda, A.; Hilger, I.; Kloeden, B.; Weissgaerber, T.; Ulbricht, A.; Bergner, F.; Radiguet, B.; Etienne, A.; Shariq, A.; Dewhurst, C. D.
Post-irradiation annealing behaviour of neutron-irradiated FeCu, FeMnNi and FeMnNiCu model alloys investigated by means of small-angle neutron scattering
Bergner, F.; Ulbricht, A.; Lindner, P.; Keiderling, U.; Malerba, L.
Application of a three-feature dispersed-barrier hardening model to neutron-irradiated Fe-Cr model alloys
Bergner, F.; Pareige, C.; Hernández-Mayoral, M.; Malerba, L.; Heintze, C.
Monitoring radiation embrittlement during life extension periods
Ballesteros, A.; Altstadt, E.; Gillemot, F.; Hein, H.; Wagemans, J.; Rouden, J.; Barthelmes, J.; Wilford, K.; Serrano, M.; Brumovsky, M.; Chaouadi, R.; Ortner, S.
Damage accumulation in pure iron and high concentrated Fe–12.5 at% Cr alloy: comparison between object kinetic Monte Carlo and cluster dynamics
Gokhman, A.; Caturla, M.; Bergner, F.
The Structural changes of Y2O3 in ferritic ODS alloys during milling
Hilger, I.; Tegel, M.; Gorley, M. J.; Grant, P. S.; Weißgärber, T.; Kieback, B.
Quantitative imaging of the magnetic configuration of modulated nanostructures by electron holography
Körner, M.; Röder, F.; Lenz, K.; Fritzsche, M.; Lindner, J.; Lichte, H.; Fassbender, J.ORC